Hobby Heaven Zephyr 7ml Fluid Cup (HHA-4101) – Screw-In Gravity Cup with Vented Lid
$6.71
Sale price $6.71Regular price
Taxes included.
Shipping calculated at checkout.
In stock · same-day dispatch before 3pm
Store rating 4.9/5 · 2225 reviews
UK tracked delivery
Spare Part
Zephyr
Cup
DWG · Product Information
PROJ: HHA-4101 · SHEET 2 / 4
01
View · Overview
Product overview
HHA-4101 is the 7 ml (1/4 oz) gravity cup of the Hobby Heaven Zephyr, the same size the airbrush ships with. A short threaded connector, sealed by a rubber O-ring, screws down into the airbrush, and paint feeds to the nozzle under its own weight, so very little is left behind. The screw-on lid prevents spills at steep angles and keeps dust out, while a small vent hole lets air in as the level drops. Buy it to replace a dented cup or lost lid, or as a second cup so one colour waits mixed while you clean the other.
Holds 7 ml, enough for miniatures and model panels without unbalancing the airbrush
Screw-on lid with a knurled edge and a vent hole
Rubber O-ring fitted above the connector thread
Polished inside, so it rinses quickly between colours
Window carton with a foam insert, labelled HHA-4101
Cup, or something else?
Problem
Fix
Paint seeps out round the base
Snug the cup by hand and inspect the O-ring; every new cup has one fitted
Cup will not start straight or feels gritty
Dried paint in a thread: clean both; replace only if the cup's own thread is damaged
Flow dwindles as the level drops with the lid fitted
Vent hole blocked: clear it with a fine cleaning needle (HHA-7202)
Paint escapes from the vent
Cup overfilled or tilted steeply: two thirds full is plenty
Bubbles in the paint while spraying
Not the cup: nozzle or nozzle cap not seated (HHA-2101/2102, HHA-2301/2302)
Dented cup, lost lid or damaged lid thread
Replace the cup; the lid comes with it
Fitting and care
Rinse out the old cup, then unscrew it by hand. Check the O-ring sits just above the connector thread of the replacement, start it straight and turn until it stops; it needs no force to seal. Test it with some water or cleaner and watch the base for weeping before adding paint. Clean straight after each session, outlet and vent included, with a soft brush (HHA-7201) or cotton bud rather than anything sharp that could scratch the polish. The cup comes off on its own, so the airbrush never needs soaking for it.
Worth knowing
This cup has only been tested on the Hobby Heaven Zephyr. Many gravity-feed airbrushes take a screw-in cup on a small connector, so it may suit yours, but threads vary between makes and no fit is guaranteed: compare it with your current cup's connector first. This is one of the numbered parts of the Hobby Heaven Zephyr range, which keeps growing; once a number is given, it always means the same part.
03
Notes · Q & A
Which parts fit the Zephyr, and will they fit another airbrush?+
Needles, nozzles, caps and body parts are made for the Hobby Heaven Zephyr (HHA-1001), and that is the only airbrush we confirm them on. The 7 ml cup and the nozzle wrench may suit other airbrushes, but that is untested. Quick disconnects, hoses, the moisture trap and the thread adapters are universal accessories built around the standard 1/8" BSP airbrush thread, and the cleaning brushes, needles and reamer are general tools. The Compatible with row on each page says which group a part belongs to.
How do I find the right part number?+
Every part has its own HHA number, printed on its box. HHA-20xx are matched needle, nozzle and cap sets, 21xx nozzles, 22xx needles, 23xx nozzle caps and 24xx needle caps; a last digit of 1 means 0.3 mm and 2 means 0.5 mm. HHA-3xxx are body parts, 4xxx cups, 5xxx air connections and 7xxx tools and cleaning. The system keeps growing: new parts join under the same numbering, and existing numbers never change meaning.
Can the Zephyr spray at 0.5 mm?+
Yes. It comes set up at 0.3 mm, and the HHA-2002 set converts it: a 0.5 mm needle, a 0.5 mm nozzle with its O-ring, a nozzle cap and a needle cap. Those four parts change together, because needle, nozzle and caps must all be the same size. The body parts (HHA-3xxx) are the same for both setups.
How does the Zephyr connect to my compressor?+
The air inlet is a 1/8" BSP male thread. Our braided hoses have a 1/8" BSP female nut at both ends, and the quick disconnects take the standard 5 mm hobby plug. Many compressors have a 1/4" BSP outlet and need an adapter; US compressors may have 1/4" NPT, which does not mate with BSP and needs an NPT-to-BSP adapter. Spray at 15–40 PSI and never above 40.
What are the seals made of, and how should I clean the parts?+
Every seal in the Zephyr is a rubber O-ring. Flush with airbrush cleaner between colours and strip-clean after a session, but keep the assembled air valve (HHA-3401) out of solvent baths, as its pin, piston, spring and O-ring come as one unit. For a blocked nozzle, soak it out of the airbrush first; the reamer (HHA-7301) is the last resort, turned and never pushed.
04
Notes · Logistics
Shipping
Orders placed before 3pm (Mon–Fri) are dispatched the same day. UK delivery is by Royal Mail 24 Tracked. Free UK delivery on orders over £70. International delivery available via Royal Mail International Tracked or courier.
Returns
If you're not happy with your purchase, contact us within 30 days for a full refund or exchange. Items must be unused and in original packaging.