Hobby Heaven Airbrush Cleaning Needle Set, 5 pcs (HHA-7202)
In stock · same-day dispatch before 3pm
- Store rating 4.9/5 · 2224 reviews
- UK tracked delivery
- Cleaning
- Accessory
DWG · Product Information
PROJ: HHA-7202 · SHEET 2 / 4
View · Overview
Product overview
HHA-7202 is a set of five cleaning needles, each a length of fine twisted wire in its own thickness, all hanging from one key ring. They go where a brush is too soft or too bulky: turned inside a hole, the spiral surface catches dried paint and pulls it out. Use them on a hardened plug in the paint channel, the vent of a cup lid, the tiny holes in caps and the bores of fittings. They are general-purpose probes, not built around one airbrush; on the Hobby Heaven Zephyr they also keep the lid vent of the 7 ml cup (HHA-4101) open.
- Five thicknesses: the finest for vents and cap holes, the heaviest for outlets
- Spiral wire profile that grips paint as it turns
- One key ring holds all five
- Dried plugs, lid vents, cap holes, fittings
- Sold in a labelled Hobby Heaven bag, HHA-7202 and barcode
Using them
Soften the paint before you probe: soak or flush with airbrush cleaner, as soft paint lifts far more easily. Withdraw the airbrush needle before working in the paint channel. Choose the thickest wire that slides in freely; a heavier one removes more each turn and bends less. Ease it in, roll it between finger and thumb, draw it out, wipe it and repeat until nothing comes back on it. Finish with another flush.
A nozzle needs care. Remove it first (the wrench HHA-7101 does it on the Zephyr), probe only from the wide back end with a wire that enters easily, and never force one through or into the tip. Even the finest needle in the set should not be expected to pass a 0.2–0.3 mm nozzle; soak that tip instead.
Blockage, or something else?
| Sign | Likely cause and remedy |
|---|---|
| Only air comes out | Paint has set in the channel or nozzle: soak, then work a wire through the channel |
| Paint starts, then fades with the lid on | Lid vent clogged, so no air replaces the paint: open it with the thinnest wire |
| Spray split or off-centre | Bent airbrush needle or damaged nozzle: replace the part, probing will not help |
| Cup fills with bubbles | Nozzle or nozzle cap loose: seat them before anything else |
| Wire refuses to enter | Hole smaller than that wire: pick a thinner one, as forcing bends it |
Care and replacing
Wipe each wire before paint dries on it. A slight bend can be eased straight with the fingers; a sharp kink means that one is finished. Never let them touch the polished outside of the airbrush, which they can scratch, and store the set on its ring in the bag, as fine wire is easy to lose.
Worth knowing
Needles poke and brushes scrub: for the walls of passages and the inside of cups, use the brush set (HHA-7201). This is one of the numbered parts of the Hobby Heaven Zephyr range, which keeps growing; once a number is given, it always means the same part.
Notes · Q & A
Which parts fit the Zephyr, and will they fit another airbrush?
Needles, nozzles, caps and body parts are made for the Hobby Heaven Zephyr (HHA-1001), and that is the only airbrush we confirm them on. The 7 ml cup and the nozzle wrench may suit other airbrushes, but that is untested. Quick disconnects, hoses, the moisture trap and the thread adapters are universal accessories built around the standard 1/8" BSP airbrush thread, and the cleaning brushes, needles and reamer are general tools. The Compatible with row on each page says which group a part belongs to.
How do I find the right part number?
Every part has its own HHA number, printed on its box. HHA-20xx are matched needle, nozzle and cap sets, 21xx nozzles, 22xx needles, 23xx nozzle caps and 24xx needle caps; a last digit of 1 means 0.3 mm and 2 means 0.5 mm. HHA-3xxx are body parts, 4xxx cups, 5xxx air connections and 7xxx tools and cleaning. The system keeps growing: new parts join under the same numbering, and existing numbers never change meaning.
Can the Zephyr spray at 0.5 mm?
Yes. It comes set up at 0.3 mm, and the HHA-2002 set converts it: a 0.5 mm needle, a 0.5 mm nozzle with its O-ring, a nozzle cap and a needle cap. Those four parts change together, because needle, nozzle and caps must all be the same size. The body parts (HHA-3xxx) are the same for both setups.
How does the Zephyr connect to my compressor?
The air inlet is a 1/8" BSP male thread. Our braided hoses have a 1/8" BSP female nut at both ends, and the quick disconnects take the standard 5 mm hobby plug. Many compressors have a 1/4" BSP outlet and need an adapter; US compressors may have 1/4" NPT, which does not mate with BSP and needs an NPT-to-BSP adapter. Spray at 15–40 PSI and never above 40.
What are the seals made of, and how should I clean the parts?
Every seal in the Zephyr is a rubber O-ring. Flush with airbrush cleaner between colours and strip-clean after a session, but keep the assembled air valve (HHA-3401) out of solvent baths, as its pin, piston, spring and O-ring come as one unit. For a blocked nozzle, soak it out of the airbrush first; the reamer (HHA-7301) is the last resort, turned and never pushed.
Notes · Logistics
Shipping
Returns
Table · Specification
Technical specifications
- Nozzle wrench
- Cleaning brushes
- Cleaning needles
- Nozzle reamer
Product
Hobby Heaven Airbrush Cleaning Needle Set, 5 pcs (HHA-7202)
Code (proj)
HHA-7202
Ship. weight
100 g
Brand
Hobby Heaven
Hobby Heaven · By hobbyists, for hobbyists
Sheet 2 / 4
End of sheet