Hobby Heaven Zephyr 0.5mm Needle & Nozzle Set (HHA-2002) – 0.5mm Conversion Kit
In stock · same-day dispatch before 3pm
- Store rating 4.9/5 · 2225 reviews
- UK tracked delivery
- Spare Part
- Zephyr
- 0.5mm
- Needle
- Needle Cap
- Nozzle
DWG · Product Information
PROJ: HHA-2002 · SHEET 2 / 4
View · Overview
Product overview
HHA-2002 turns the Hobby Heaven Zephyr from its stock 0.3 mm into a 0.5 mm airbrush. Inside are the four parts that must change as one: needle and nozzle in 0.5 mm, the nozzle carrying a rubber O-ring, plus the nozzle cap and needle cap made for that size. The opening in the cap must suit the nozzle for the air to wrap around the paint properly, which is why both caps are part of the set. Already using 0.5 mm on your Zephyr? Then the set doubles as the replacement for worn parts.
- One airbrush, two sizes: stay on the stock size for detail, switch to this set when a job needs more flow
- Four parts, one of each, all 0.5 mm, with the O-ring already on the nozzle
- Knurled caps: external thread on the nozzle cap, internal thread on the needle cap
- Packed in EVA foam, with a padded tube for the needle and a padded container that later stores the idle set
- Made for the Zephyr only, with no claim of fit on other airbrushes
Choosing the size for the job
| Size | Good for | Why |
|---|---|---|
| 0.5 mm (this set) | Primer, varnish of any sheen, metallic and colour-shift paints, basecoats on vehicles, big kits and terrain | Thicker paint and metal flakes pass without clogging, and coverage is quicker |
| 0.3 mm (HHA-2001, stock) | Freehand detail, glazes, fine lines and small figures | A narrower spray that is easier to control |
The label on a paint or primer can settle it: some brands print a minimum nozzle size.
Swapping between sizes
Shut off the air supply and give the airbrush a clean. With the handle removed and the chucking nut slackened, the nozzle unscrews and the needle slides out of the front. Build the other size up in reverse: needle in from the front, nozzle finger-tight with just a touch more from the wrench (forcing it cracks the nozzle), both caps, then let the needle seat gently before the chucking nut and handle go back. You need the Zephyr wrench, HHA-7101, which is not included here. Put the removed parts straight into this box so the two sizes never end up mixed.
Worth knowing
Fine detail is not what 0.5 mm is for. Careful lever control still gives a soft line, but fine work is easier back on 0.3 mm with HHA-2001, which is the point of owning both. Swap all four parts at once: the smaller cap over this nozzle, or the larger needle pushed into the smaller nozzle, sprays badly and may ruin the parts. Needle tips bend easily at any size, usually from a fall off the desk or a cloth pulled towards the point, so wipe a needle away from its tip.
Notes · Q & A
Which parts fit the Zephyr, and will they fit another airbrush?
Needles, nozzles, caps and body parts are made for the Hobby Heaven Zephyr (HHA-1001), and that is the only airbrush we confirm them on. The 7 ml cup and the nozzle wrench may suit other airbrushes, but that is untested. Quick disconnects, hoses, the moisture trap and the thread adapters are universal accessories built around the standard 1/8" BSP airbrush thread, and the cleaning brushes, needles and reamer are general tools. The Compatible with row on each page says which group a part belongs to.
How do I find the right part number?
Every part has its own HHA number, printed on its box. HHA-20xx are matched needle, nozzle and cap sets, 21xx nozzles, 22xx needles, 23xx nozzle caps and 24xx needle caps; a last digit of 1 means 0.3 mm and 2 means 0.5 mm. HHA-3xxx are body parts, 4xxx cups, 5xxx air connections and 7xxx tools and cleaning. The system keeps growing: new parts join under the same numbering, and existing numbers never change meaning.
Can the Zephyr spray at 0.5 mm?
Yes. It comes set up at 0.3 mm, and the HHA-2002 set converts it: a 0.5 mm needle, a 0.5 mm nozzle with its O-ring, a nozzle cap and a needle cap. Those four parts change together, because needle, nozzle and caps must all be the same size. The body parts (HHA-3xxx) are the same for both setups.
How does the Zephyr connect to my compressor?
The air inlet is a 1/8" BSP male thread. Our braided hoses have a 1/8" BSP female nut at both ends, and the quick disconnects take the standard 5 mm hobby plug. Many compressors have a 1/4" BSP outlet and need an adapter; US compressors may have 1/4" NPT, which does not mate with BSP and needs an NPT-to-BSP adapter. Spray at 15–40 PSI and never above 40.
What are the seals made of, and how should I clean the parts?
Every seal in the Zephyr is a rubber O-ring. Flush with airbrush cleaner between colours and strip-clean after a session, but keep the assembled air valve (HHA-3401) out of solvent baths, as its pin, piston, spring and O-ring come as one unit. For a blocked nozzle, soak it out of the airbrush first; the reamer (HHA-7301) is the last resort, turned and never pushed.
Notes · Logistics
Shipping
Returns
Table · Specification
Technical specifications
- 0.3 mm needle & nozzle set
- 0.5 mm needle & nozzle set
Product
Hobby Heaven Zephyr 0.5mm Needle & Nozzle Set (HHA-2002) – 0.5mm Conversion Kit
Code (proj)
HHA-2002
Ship. weight
100 g
Brand
Hobby Heaven
Hobby Heaven · By hobbyists, for hobbyists
Sheet 2 / 4
End of sheet