Hobby Heaven Zephyr Spring Case (HHA-3203) – Replacement Airbrush Spare
$3.66
Sale price $3.66Regular price
Shipping calculated at checkout.
In stock · same-day dispatch before 3pm
Store rating 4.9/5 · 2225 reviews
UK tracked delivery
Spare Part
Zephyr
Spring
DWG · Product Information
PROJ: HHA-3203 · SHEET 2 / 4
01
View · Overview
Product overview
Seated in the tail of the Hobby Heaven Zephyr body, this threaded sleeve keeps the needle return spring pressed onto the needle chucking guide. Draw the trigger rearwards and the guide squeezes the spring inside the case; let go and the compressed spring drives guide, needle and trigger forward until the needle shuts the nozzle and the paint stops. The sleeve is hollow, so the guide's tail and the needle pass straight through on their way to the chucking nut; the rear control knob sits behind. It goes in until it seats and offers no tension adjustment.
External thread and fluted grip, turned by hand
Hollow bore for spring, guide tail and needle
The spring is not in the pack: move the one from your old case across
Fits a 0.3 mm Zephyr and a 0.5 mm conversion equally; built for the Zephyr
Hobby Heaven blister, label HHA-3203 with barcode
Is the spring case at fault?
What happens
Check this
Slack in the trigger
Case not fully in: turn it by hand until it bottoms out
Case missing
This part, plus the spring that lived inside it
Starts crooked, cross-threads or turns stiffly
Damaged thread: this part; inspect the body's thread as well
Bent or dented, guide catches inside
This part
Needle ignores the trigger
Chucking nut (HHA-3202)
No return after a strip-down
Guide (HHA-3201) reseated at a wrong angle
Signs it needs replacing
Its thread is burred, flattened or crossed; the case is dented or bent, typically after the airbrush landed on its tail; or the fluted grip is so marked by pliers that fingers can no longer turn it. A case that has merely backed off needs screwing in, nothing more.
Fitting
Have the quick start guide's parts diagram open and disconnect the air. Slacken the nut, take off handle and nozzle, and withdraw the needle forwards. Unscrew the old case together with the knob and keep its spring. Confirm the guide plate still sits behind the trigger, drop the spring in, start the new case square by hand and turn it home, then refit the knob. Return the needle from the front, refit nozzle and caps, rest the needle softly in the nozzle and lock it with the nut, hand-tight.
Worth knowing
Fingers only: pliers mark the grip. Paint residue or old lube stiffens the thread, so wipe it clean and keep it dry. This is one of the numbered parts of the Hobby Heaven Zephyr range, which keeps growing; once a number is given, it always means the same part.
03
Notes · Q & A
Which parts fit the Zephyr, and will they fit another airbrush?+
Needles, nozzles, caps and body parts are made for the Hobby Heaven Zephyr (HHA-1001), and that is the only airbrush we confirm them on. The 7 ml cup and the nozzle wrench may suit other airbrushes, but that is untested. Quick disconnects, hoses, the moisture trap and the thread adapters are universal accessories built around the standard 1/8" BSP airbrush thread, and the cleaning brushes, needles and reamer are general tools. The Compatible with row on each page says which group a part belongs to.
How do I find the right part number?+
Every part has its own HHA number, printed on its box. HHA-20xx are matched needle, nozzle and cap sets, 21xx nozzles, 22xx needles, 23xx nozzle caps and 24xx needle caps; a last digit of 1 means 0.3 mm and 2 means 0.5 mm. HHA-3xxx are body parts, 4xxx cups, 5xxx air connections and 7xxx tools and cleaning. The system keeps growing: new parts join under the same numbering, and existing numbers never change meaning.
Can the Zephyr spray at 0.5 mm?+
Yes. It comes set up at 0.3 mm, and the HHA-2002 set converts it: a 0.5 mm needle, a 0.5 mm nozzle with its O-ring, a nozzle cap and a needle cap. Those four parts change together, because needle, nozzle and caps must all be the same size. The body parts (HHA-3xxx) are the same for both setups.
How does the Zephyr connect to my compressor?+
The air inlet is a 1/8" BSP male thread. Our braided hoses have a 1/8" BSP female nut at both ends, and the quick disconnects take the standard 5 mm hobby plug. Many compressors have a 1/4" BSP outlet and need an adapter; US compressors may have 1/4" NPT, which does not mate with BSP and needs an NPT-to-BSP adapter. Spray at 15–40 PSI and never above 40.
What are the seals made of, and how should I clean the parts?+
Every seal in the Zephyr is a rubber O-ring. Flush with airbrush cleaner between colours and strip-clean after a session, but keep the assembled air valve (HHA-3401) out of solvent baths, as its pin, piston, spring and O-ring come as one unit. For a blocked nozzle, soak it out of the airbrush first; the reamer (HHA-7301) is the last resort, turned and never pushed.
04
Notes · Logistics
Shipping
Orders placed before 3pm (Mon–Fri) are dispatched the same day. UK delivery is by Royal Mail 24 Tracked. Free UK delivery on orders over £70. International delivery available via Royal Mail International Tracked or courier.
Returns
If you're not happy with your purchase, contact us within 30 days for a full refund or exchange. Items must be unused and in original packaging.