AK Interactive — Airbrush Parts

Needle + Nozzle 0.2 mm

AK9600-02 · Turn Your 0.3 Airbrush Into 0.2 · Stainless Steel + Brass

What Is This?

A 0.2 mm needle and nozzle set that converts your AK9600 Top Line Airbrush from the standard 0.3 mm setup to an ultra-fine detail tool. The needle is precision-ground stainless steel, the nozzle is machined brass with a self-centering design.

The tagline on the packaging says it all: "Turn your 0.3 airbrush into 0.2 with this kit." Same airbrush body, significantly finer output — hairline spray patterns that the 0.3 mm nozzle can't achieve.

Both parts come individually protected: the needle in a clear protective tube with red end caps and a "0.2" label, and the nozzle in a separate screw-cap vial. Ready for immediate installation.

Why Go to 0.2 mm?

🎯 Laser-Thin Lines — Preshade panel lines, spray highlights onto 28 mm faces, lay down freehand designs impossible with 0.3 mm.

🔄 Quick Swap — Unscrew the 0.3 mm parts, install 0.2 mm, done in minutes. Swap back just as easily for broader coverage.

⚙️ Self-Centering Nozzle — The brass nozzle seats itself in perfect alignment automatically. No calibration after reassembly.

🔩 Quality Materials — Stainless steel needle resists bending and corrosion. Brass nozzle handles cleaning solvents without degradation.

💰 Fraction of a Second Airbrush — Adding 0.2 mm capability to your existing AK9600 costs far less than buying a dedicated fine-detail airbrush.

0.2 mm vs 0.3 mm — When to Use Which

	0.3 mm (standard)	0.2 mm (this set)
Best for	Priming, base coating, broad coverage	Fine lines, detail work, precision
Paint consistency	Standard thin to medium	Milk-thin only
Typical PSI	15–25 PSI	10–18 PSI
Use case	Your everyday workhorse	Your precision scalpel

💡 Keep both. Use 0.3 mm for priming and base coats, swap to 0.2 mm for detail passes.

Specifications

Brand	AK Interactive
Product Name	Needle + Nozzle 0.2 Replacement for AK9600
Reference / SKU	AK9600-02
Nozzle Size	0.2 mm
Contents	1× stainless steel needle (in protective tube) + 1× brass self-centering nozzle (in screw-cap vial)
Compatible With	AK9600 Top Line Airbrush only
Condition	Brand New

Worth Knowing

⚠ AK9600 Top Line Airbrush only. Will not fit Iwata, Harder & Steenbeck, Badger, or other brands.

⚠ Not for priming or heavy base coats. 0.2 mm is a detail tool. Thick paints will clog constantly. Keep your 0.3 mm for coverage.

⚠ Needle tip is fragile. Always handle with tweezers and store in the protective tube when not installed.

Hobby Heaven — By Hobbyists. For Hobbyists.

Family-run hobby supplies from Derby, UK. Authorised AK Interactive dealer.

Item		Price	Qty	Total
		Subtotal	$0.00
		Shipping
		Total

AK Interactive Accessories, Diorama Effects - Items tagged as "Part:needle"

Our brands

Net Orders Checkout

Shipping Address

Shipping Methods