HHA-3201 Zephyr needle chucking guide shown enlarged beside its Hobby Heaven blister pack, 1 guide supplied

Hobby Heaven Zephyr Needle Chucking Guide (HHA-3201) – Replacement Airbrush Spare

£3.99
Sale price  £3.99 Regular price 
Skip to product information
HHA-3201 Zephyr needle chucking guide shown enlarged beside its Hobby Heaven blister pack, 1 guide supplied

Hobby Heaven Zephyr Needle Chucking Guide (HHA-3201) – Replacement Airbrush Spare

£3.99
Sale price  £3.99 Regular price 
Taxes included. Shipping calculated at checkout.

In stock · same-day dispatch before 3pm

  • Store rating 4.9/5 · 2225 reviews
  • UK tracked delivery
  • Spare Part
  • Zephyr
  • Chucking Guide

DWG · Product Information

PROJ: HHA-3201 · SHEET 2 / 4

View · Overview

Product overview

Behind the trigger of the Hobby Heaven Zephyr sits the part that really moves the needle. The needle passes along its centre, and the chucking nut clamps it at the split, threaded rear end. When you rock the trigger backwards, it bears on the curved front plate, so guide and needle slide rearwards together against the return spring; release it and the spring pushes both forward until the needle closes the nozzle and paint stops. The rear control knob limits the guide's travel, and the angle of its plate shapes how the pull feels.

  • Curved front plate with centre bush, polished body, slotted threaded tail
  • Serves the 0.3 mm setup and a Zephyr rebuilt for 0.5 mm alike
  • Made solely for the Hobby Heaven Zephyr; no other model confirmed
  • Packed in a blister marked HHA-3201 with barcode

Is the guide to blame?

What you see Likely cause
Trigger comes back, needle does not Snug the chucking nut (HHA-3202) first; slipping with a firm nut means a worn tail, so this part
No return or untidy shut-off right after a rebuild Plate seated at a wrong angle; reseat it before ordering
Slack in the trigger Spring case (HHA-3203) not fully screwed in
Lever sticks or returns slowly Paint residue, else the air valve (HHA-3401); rarely the guide
Trigger missing or bent Trigger (HHA-3101)
Body bent, plate cracked, slots splayed, thread damaged This part

Signs it needs replacing

Replace it when the needle shifts in the guide although the nut is tight, the tail slots have opened up or one side is bent, the nut will not run on smoothly over a flattened thread, the body catches as it slides, or the plate is cracked or distorted. One that was only refitted back to front is fine; reseat it.

Fitting

Air off, then follow the parts diagram in the quick start guide. Remove the handle, ease off the nut, unscrew the nozzle and slide the needle forward and out. Take out spring case and knob, then draw out spring and old guide. Fit the new guide behind the trigger, plate angled so the pull feels even: this single step decides how the trigger feels. Refit spring and spring case by hand, the needle is threaded in from the front, then nozzle and caps; push the needle home lightly until it meets the nozzle and finger-tighten the nut.

Worth knowing

Only fingers on the chucking nut: pliers squeeze the slotted tail out of round and it loses its grip. Nut, spring and spring case are sold separately. This is one of the numbered parts of the Hobby Heaven Zephyr range, which keeps growing; once a number is given, it always means the same part.

Notes · Q & A

Which parts fit the Zephyr, and will they fit another airbrush?

Needles, nozzles, caps and body parts are made for the Hobby Heaven Zephyr (HHA-1001), and that is the only airbrush we confirm them on. The 7 ml cup and the nozzle wrench may suit other airbrushes, but that is untested. Quick disconnects, hoses, the moisture trap and the thread adapters are universal accessories built around the standard 1/8" BSP airbrush thread, and the cleaning brushes, needles and reamer are general tools. The Compatible with row on each page says which group a part belongs to.

How do I find the right part number?

Every part has its own HHA number, printed on its box. HHA-20xx are matched needle, nozzle and cap sets, 21xx nozzles, 22xx needles, 23xx nozzle caps and 24xx needle caps; a last digit of 1 means 0.3 mm and 2 means 0.5 mm. HHA-3xxx are body parts, 4xxx cups, 5xxx air connections and 7xxx tools and cleaning. The system keeps growing: new parts join under the same numbering, and existing numbers never change meaning.

Can the Zephyr spray at 0.5 mm?

Yes. It comes set up at 0.3 mm, and the HHA-2002 set converts it: a 0.5 mm needle, a 0.5 mm nozzle with its O-ring, a nozzle cap and a needle cap. Those four parts change together, because needle, nozzle and caps must all be the same size. The body parts (HHA-3xxx) are the same for both setups.

How does the Zephyr connect to my compressor?

The air inlet is a 1/8" BSP male thread. Our braided hoses have a 1/8" BSP female nut at both ends, and the quick disconnects take the standard 5 mm hobby plug. Many compressors have a 1/4" BSP outlet and need an adapter; US compressors may have 1/4" NPT, which does not mate with BSP and needs an NPT-to-BSP adapter. Spray at 15–40 PSI and never above 40.

What are the seals made of, and how should I clean the parts?

Every seal in the Zephyr is a rubber O-ring. Flush with airbrush cleaner between colours and strip-clean after a session, but keep the assembled air valve (HHA-3401) out of solvent baths, as its pin, piston, spring and O-ring come as one unit. For a blocked nozzle, soak it out of the airbrush first; the reamer (HHA-7301) is the last resort, turned and never pushed.

Notes · Logistics

Shipping

Orders placed before 3pm (Mon–Fri) are dispatched the same day. UK delivery is by Royal Mail 24 Tracked. Free UK delivery on orders over £70. International delivery available via Royal Mail International Tracked or courier.

Returns

If you're not happy with your purchase, contact us within 30 days for a full refund or exchange. Items must be unused and in original packaging.

Table · Specification

Technical specifications

Product details
Brand
Hobby Heaven
Product code
HHA-3201
Type
Accessories
Shipping weight
100 g
Barcode
5061001183326
Materials & finish
Format
Needle chucking guide
Usage & compatibility
Compatible with
Hobby Heaven Zephyr
Other parts
Also in this range
Zephyr airbrush system

Product

Hobby Heaven Zephyr Needle Chucking Guide (HHA-3201) – Replacement Airbrush Spare

Code (proj)

HHA-3201

Ship. weight

100 g

Brand

Hobby Heaven

Hobby Heaven · By hobbyists, for hobbyists

Sheet 2 / 4

End of sheet

Complete The Job