HHA-2101 0.3mm airbrush nozzle beside its Hobby Heaven blister pack, 1 nozzle supplied

Hobby Heaven Zephyr 0.3mm Nozzle (HHA-2101) – Replacement Airbrush Nozzle with O-Ring

£4.59
Sale price  £4.59 Regular price 
Skip to product information
HHA-2101 0.3mm airbrush nozzle beside its Hobby Heaven blister pack, 1 nozzle supplied

Hobby Heaven Zephyr 0.3mm Nozzle (HHA-2101) – Replacement Airbrush Nozzle with O-Ring

£4.59
Sale price  £4.59 Regular price 
Taxes included. Shipping calculated at checkout.

In stock · same-day dispatch before 3pm

  • Store rating 4.9/5 · 2225 reviews
  • UK tracked delivery
  • Spare Part
  • Zephyr
  • 0.3mm
  • Nozzle

DWG · Product Information

PROJ: HHA-2101 · SHEET 2 / 4

View · Overview

Product overview

HHA-2101 covers the 0.3 mm nozzle of the Hobby Heaven Zephyr, the size the airbrush ships with. It is the small threaded piece screwed into the nose of the body, and the needle tip sits in it. Draw the trigger back and the needle retracts from the opening, letting paint through to meet the air; release it and the needle closes the opening again. That thin tip is easy to split with over-enthusiastic wrench work or a needle rammed home. If your needle and caps are still sound, this one part is all the repair needs.

  • 0.3 mm: the Zephyr’s standard size, as supplied
  • Rubber O-ring already fitted on the thread
  • Screws into the body; fitted and removed with the Zephyr nozzle wrench (HHA-7101)
  • Packed in a transparent screw-cap pot lined with foam, sealed in a blister labelled HHA-2101

Is it really the nozzle?

What you notice Likely cause What to get
Under a magnifier the tip shows a crack, chip or flared edge Damaged nozzle This nozzle
Needle point bent or hooked, nozzle opening clean and round Needle 0.3 mm needle HHA-2201
Bubbles appear in the cup as you spray Air leaking round a loose nozzle or a tired O-ring Snug it up; replace if bubbles persist
Paint stops or comes in bursts after the airbrush stood unused Paint dried inside the tip Soak and clean before buying anything
Needle and nozzle both worn out, or a cap gone missing More than one part Whole 0.3 mm set HHA-2001

Signs it needs replacing

A healthy nozzle has a clean, round opening when viewed through a loupe or zoomed phone camera. A split or splayed edge cannot be cleaned away, and nor can a spray line that drifts sideways once the airbrush is stripped and clean.

Fitting

  • Shut off and unplug the air supply, then flush the airbrush clean.
  • Take off both caps, loosen the needle chucking nut and ease the needle back clear of the nozzle.
  • Undo the worn nozzle using the wrench and check its O-ring has come out too.
  • Turn the new one in by hand, then give the wrench only a slight nudge. Over-tightening is how nozzles split.
  • Refit the caps, slide the needle forward until it stops in its seat, tighten the chucking nut and check on clean water before paint.

Care

Soak a blocked nozzle, out of the airbrush, in cleaner; never push a pin through it. The reamer HHA-7301 is the last resort, turned gently.

Worth knowing

  • Alone, it will not move a Zephyr to 0.5 mm. The needle, the nozzle and the two caps change together: that is the HHA-2002 set.
  • Built for the Zephyr alone: we make no claim that it fits any other airbrush.
  • One of the numbered parts of our Zephyr system, which keeps growing; reorder by the HHA code on the pack.

Notes · Q & A

Which parts fit the Zephyr, and will they fit another airbrush?

Needles, nozzles, caps and body parts are made for the Hobby Heaven Zephyr (HHA-1001), and that is the only airbrush we confirm them on. The 7 ml cup and the nozzle wrench may suit other airbrushes, but that is untested. Quick disconnects, hoses, the moisture trap and the thread adapters are universal accessories built around the standard 1/8" BSP airbrush thread, and the cleaning brushes, needles and reamer are general tools. The Compatible with row on each page says which group a part belongs to.

How do I find the right part number?

Every part has its own HHA number, printed on its box. HHA-20xx are matched needle, nozzle and cap sets, 21xx nozzles, 22xx needles, 23xx nozzle caps and 24xx needle caps; a last digit of 1 means 0.3 mm and 2 means 0.5 mm. HHA-3xxx are body parts, 4xxx cups, 5xxx air connections and 7xxx tools and cleaning. The system keeps growing: new parts join under the same numbering, and existing numbers never change meaning.

Can the Zephyr spray at 0.5 mm?

Yes. It comes set up at 0.3 mm, and the HHA-2002 set converts it: a 0.5 mm needle, a 0.5 mm nozzle with its O-ring, a nozzle cap and a needle cap. Those four parts change together, because needle, nozzle and caps must all be the same size. The body parts (HHA-3xxx) are the same for both setups.

How does the Zephyr connect to my compressor?

The air inlet is a 1/8" BSP male thread. Our braided hoses have a 1/8" BSP female nut at both ends, and the quick disconnects take the standard 5 mm hobby plug. Many compressors have a 1/4" BSP outlet and need an adapter; US compressors may have 1/4" NPT, which does not mate with BSP and needs an NPT-to-BSP adapter. Spray at 15–40 PSI and never above 40.

What are the seals made of, and how should I clean the parts?

Every seal in the Zephyr is a rubber O-ring. Flush with airbrush cleaner between colours and strip-clean after a session, but keep the assembled air valve (HHA-3401) out of solvent baths, as its pin, piston, spring and O-ring come as one unit. For a blocked nozzle, soak it out of the airbrush first; the reamer (HHA-7301) is the last resort, turned and never pushed.

Notes · Logistics

Shipping

Orders placed before 3pm (Mon–Fri) are dispatched the same day. UK delivery is by Royal Mail 24 Tracked. Free UK delivery on orders over £70. International delivery available via Royal Mail International Tracked or courier.

Returns

If you're not happy with your purchase, contact us within 30 days for a full refund or exchange. Items must be unused and in original packaging.

Table · Specification

Technical specifications

Product details
Brand
Hobby Heaven
Product code
HHA-2101
Type
Accessories
Shipping weight
100 g
Barcode
5061001183234
Made in
China
Materials & finish
Format
0.3 mm nozzle
Usage & compatibility
Nozzle size
0.3 mm
Compatible with
Hobby Heaven Zephyr
Other parts
Also in this range
Zephyr airbrush system

Product

Hobby Heaven Zephyr 0.3mm Nozzle (HHA-2101) – Replacement Airbrush Nozzle with O-Ring

Code (proj)

HHA-2101

Ship. weight

100 g

Brand

Hobby Heaven

Hobby Heaven · By hobbyists, for hobbyists

Sheet 2 / 4

End of sheet

Complete The Job