Hobby Heaven Zephyr 0.3mm Needle Cap (HHA-2401) – Front Crown Needle Guard
£3.29
Sale price £3.29Regular price
Taxes included.
Shipping calculated at checkout.
In stock · same-day dispatch before 3pm
Store rating 4.9/5 · 2225 reviews
UK tracked delivery
Spare Part
Zephyr
Needle Cap
DWG · Product Information
PROJ: HHA-2401 · SHEET 2 / 4
01
View · Overview
Product overview
Right at the tip of a Zephyr, threaded over the nozzle cap, sits the needle cap. It is there to keep bumps away from the needle point, which bends more easily than anything else on the airbrush and spoils the spray the moment it does. HHA-2401 suits the 0.3 mm setup every Zephyr is delivered with. Since it is the piece you unscrew for close detail and then put down somewhere, it is also the one that goes missing; a spare stops the needle running unguarded.
Covers the point of the HHA-2201 needle (0.3 mm)
Open at the front, so spray leaves unobstructed and the needle point stays in view
Ridged rim to turn it with your fingers
Threads onto nozzle cap HHA-2301
Comes in a clear, foam-packed tube marked 0.3mm
Detail work without the cap
Unscrewing the needle cap exposes the point, so you can watch it, bring the airbrush right up to the model and brush off a crust of dried paint without dismantling the front. The needle is then bare. Work with it off only for fine lines and small details, screw it back on for general coats, and refit it whenever you set the airbrush aside.
Is it really the needle cap?
Sign
Order this
Needle cap gone, bent at the rim or not threading
This cap, HHA-2401
Nozzle cap knocked out of shape or lost
Nozzle cap HHA-2301 (0.3 mm)
Kinked or curled needle point
HHA-2201 needle
Two or more front parts damaged at once
Set HHA-2001
A dented needle cap has usually done its job, yet a hard knock can still reach the point behind it, so inspect the needle with a loupe or magnifier.
When it is time for a new one
Change it when the rim is dented or rough, the thread grates, the cap tilts once tightened, or it touches the needle point. Most of those complaints are really caked paint, though: leave the cap to soak in cleaner for a while, then clear it out with a soft HHA-7201 brush, and only then decide.
Fitting
With the air disconnected, confirm the nozzle cap underneath is fully home, then spin the needle cap on with light finger pressure. Should the thread bite crookedly, take it off and line it up afresh. It needs no tool and no force. Whenever it is off, mind where the exposed needle point goes.
Worth knowing
Swapping needle caps leaves the spray size untouched, because size is decided by the needle, the nozzle and the nozzle cap working together. A Zephyr converted with HHA-2002 takes the 0.5 mm needle cap, HHA-2402. Zephyr owners only: we have not confirmed it on other airbrushes. Each part in the growing Zephyr system has its own HHA number for reordering.
03
Notes · Q & A
Which parts fit the Zephyr, and will they fit another airbrush?+
Needles, nozzles, caps and body parts are made for the Hobby Heaven Zephyr (HHA-1001), and that is the only airbrush we confirm them on. The 7 ml cup and the nozzle wrench may suit other airbrushes, but that is untested. Quick disconnects, hoses, the moisture trap and the thread adapters are universal accessories built around the standard 1/8" BSP airbrush thread, and the cleaning brushes, needles and reamer are general tools. The Compatible with row on each page says which group a part belongs to.
How do I find the right part number?+
Every part has its own HHA number, printed on its box. HHA-20xx are matched needle, nozzle and cap sets, 21xx nozzles, 22xx needles, 23xx nozzle caps and 24xx needle caps; a last digit of 1 means 0.3 mm and 2 means 0.5 mm. HHA-3xxx are body parts, 4xxx cups, 5xxx air connections and 7xxx tools and cleaning. The system keeps growing: new parts join under the same numbering, and existing numbers never change meaning.
Can the Zephyr spray at 0.5 mm?+
Yes. It comes set up at 0.3 mm, and the HHA-2002 set converts it: a 0.5 mm needle, a 0.5 mm nozzle with its O-ring, a nozzle cap and a needle cap. Those four parts change together, because needle, nozzle and caps must all be the same size. The body parts (HHA-3xxx) are the same for both setups.
How does the Zephyr connect to my compressor?+
The air inlet is a 1/8" BSP male thread. Our braided hoses have a 1/8" BSP female nut at both ends, and the quick disconnects take the standard 5 mm hobby plug. Many compressors have a 1/4" BSP outlet and need an adapter; US compressors may have 1/4" NPT, which does not mate with BSP and needs an NPT-to-BSP adapter. Spray at 15–40 PSI and never above 40.
What are the seals made of, and how should I clean the parts?+
Every seal in the Zephyr is a rubber O-ring. Flush with airbrush cleaner between colours and strip-clean after a session, but keep the assembled air valve (HHA-3401) out of solvent baths, as its pin, piston, spring and O-ring come as one unit. For a blocked nozzle, soak it out of the airbrush first; the reamer (HHA-7301) is the last resort, turned and never pushed.
04
Notes · Logistics
Shipping
Orders placed before 3pm (Mon–Fri) are dispatched the same day. UK delivery is by Royal Mail 24 Tracked. Free UK delivery on orders over £70. International delivery available via Royal Mail International Tracked or courier.
Returns
If you're not happy with your purchase, contact us within 30 days for a full refund or exchange. Items must be unused and in original packaging.