Iwata Neo CN Replacement Needle 0.35mm (IWN-0751 N3) – Genuine Stainless Steel Part for Neo CN Airbrush

Iwata Neo CN Replacement Needle 0.35mm (IWN-0751 N3) – Genuine Stainless Steel Part for Neo CN Airbrush
Iwata Neo CN Replacement Needle 0.35mm (IWN-0751 N3) – Genuine Stainless Steel Part for Neo CN Airbrush
Iwata Neo CN Replacement Needle 0.35mm (IWN-0751 N3) – Genuine Stainless Steel Part for Neo CN Airbrush
Iwata Neo CN Replacement Needle 0.35mm (IWN-0751 N3) – Genuine Stainless Steel Part for Neo CN Airbrush
Iwata Neo CN Replacement Needle 0.35mm (IWN-0751 N3) – Genuine Stainless Steel Part for Neo CN Airbrush
Iwata Neo CN Replacement Needle 0.35mm (IWN-0751 N3) – Genuine Stainless Steel Part for Neo CN Airbrush

Tamiya

$8.92 
SKU: IWN-0751

🔸 IWATA NEO CN 0.35MM NEEDLE IWN-0751 - Genuine Replacement | Hobby Heaven

🔸 IWATA NEO CN 0.35MM NEEDLE (N3)

Model IWN-0751 | Genuine Iwata Part | Stainless Steel | Original Equipment
🏪 HOBBY HEAVEN - Authentic Art Supplies with Expert Support

⚠️ COMPATIBILITY CHECK REQUIRED ⚠️

Verify your airbrush model before ordering - fits specific Neo models only

🔍 What You're Getting

This is an original Iwata replacement needle for the Neo CN gravity-feed airbrush. Made from stainless steel with 0.35mm diameter for precise paint control. Designed specifically for model IWN-0751.

Size: 0.35mm diameter - good balance of detail and coverage
Material: High-quality stainless steel, corrosion resistant
Compatibility: Neo CN gravity-feed (primary), Neo BCN siphon-feed (with correct nozzle)

🎯 Exact Compatibility

✅ Primary Fit:
  • Iwata Neo CN Gravity-Feed
  • Model IWN-0751
  • Direct replacement, no modifications
⚠️ Secondary Fit:
  • Neo BCN Siphon-Feed
  • Requires N3 nozzle with O-ring
  • Requires compatible needle cap
❌ Will NOT Fit:
  • Other Iwata models
  • Eclipse, Revolution, HP series
  • Non-Iwata airbrushes

📊 Needle Specifications

Part Number IWN-0751
Needle Diameter 0.35mm
Material Stainless Steel
Primary Compatibility Neo CN Gravity-Feed Airbrush
Type Original Equipment Replacement
Line Capability Fine detail to medium coverage
Corrosion Resistance Excellent (stainless steel)

🚨 Signs You Need a New Needle

💨

Spray Problems

Irregular spray pattern, spitting paint, or difficulty achieving smooth lines

💔

Physical Damage

Visible bends, hooks, or dents in the needle tip - even tiny damage affects performance

📏

Loss of Detail

Can't achieve fine lines anymore, or minimum line width has increased

🔄

Preventive Replacement

Keep a spare on hand - needles wear out with normal use over time

🔧 Installation & Care Tips

🔧Installing

Insert gently, don't force. Thread carefully through the nozzle. Check alignment before tightening.

🧼Daily Care

Clean thoroughly after each session. Don't let paint dry on the needle. Use proper cleaning solvents.

📦Storage

Store safely when not in airbrush. Protect tip from damage. Consider needle rest or case.

⚠️Handling

The tip is extremely delicate. Even small bends ruin performance. Handle with care always.

💬 Straight Answers About Replacement Needles

🤔 How do I know if this fits my airbrush?
Check your airbrush model number. This needle is specifically for Neo CN gravity-feed (IWN-0751). If you have a different model, you need a different needle.
⏰ How often do needles need replacing?
Depends on usage and care. With careful use, 6 months to 2 years. Heavy users or those who damage tips frequently might need replacement more often. Keep a spare.
📈 Will this improve my airbrush performance?
Only if your current needle is damaged. A new needle won't fix poor technique, wrong paint consistency, or compressor issues. It fixes needle-specific problems only.
🔧 Is installation difficult?
No, but requires care. Remove old needle gently, insert new one slowly. Don't force anything. If you're unsure, check the manual or ask for help.
🔄 What about non-genuine needles?
Genuine Iwata needles have consistent quality and fit. Generic needles might work but quality varies. For precision work, genuine parts are worth the extra cost.
🔨 Can I straighten a bent needle?
Don't try. Bent needles rarely work properly even if straightened. The metal stress creates weak points. Better to replace it and learn from the mistake.
📦 Should I buy multiple needles?
One spare is smart for continuity. Multiple needles aren't necessary unless you want dedicated needles for different paint types or frequently damage them.

⭐ Why Choose Genuine Iwata Parts

Exact fit guarantee - manufactured to original specifications
Consistent quality - same materials and processes as original equipment
Precise dimensions - 0.35mm means exactly 0.35mm, not "approximately"
Corrosion resistance - proper stainless steel grade for paint compatibility
Long-term availability - Iwata supports their products with ongoing parts supply

🌟 Why Buy From Hobby Heaven

Genuine Iwata parts
with proper packaging
🚚 Same-day dispatch
on orders before 2PM weekdays
💬 Technical support
for installation questions
🔧 Stock other Neo CN parts
maintenance parts
📋 Clear compatibility info
no guesswork

Restore Your Neo CN Performance

Genuine Iwata quality | Same-day dispatch | Expert support

HOBBY HEAVEN
Authentic supplies, honest advice, reliable service

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Our brands