Iwata Eclipse HP-CS Dual-Action Airbrush 0.35mm Nozzle with Gravity Cup – Professional Spray Tool
🎨 IWATA ECLIPSE CS AIRBRUSH
Dual-Action | 0.35mm | 7ml Cup with Lid | 110g | 10-Year Warranty
🏪 HOBBY HEAVEN - Authentic Art Supplies with Expert Support
🏪 HOBBY HEAVEN - Authentic Art Supplies with Expert Support
🔍 What You Need to Know
The Eclipse CS is a gravity-fed dual-action airbrush with a 0.35mm needle. It weighs 110g and comes with a 7ml cup with lid. Works at 25-35 PSI. Features compression-fit nozzle and PTFE solvent-resistant seals. Standard 1/8" thread.
0.35mm Needle/Nozzle
0.35-50mm Line Width
7ml + Lid Cup Size
110g Weight
10 Years Warranty
Line width: 0.35mm fine lines up to 50mm broad coverage
Paint compatibility: Water-based and solvent-based paints, lacquers, cosmetics
Special features: Cutaway handle design, compression-fit nozzle, PTFE seals
Paint compatibility: Water-based and solvent-based paints, lacquers, cosmetics
Special features: Cutaway handle design, compression-fit nozzle, PTFE seals
⚙️ Technical Specifications
| Action Type | Dual-Action (independent air and paint control) |
|---|---|
| Needle/Nozzle | 0.35mm |
| Line Width | 0.35mm to 50mm |
| Cup Size | 7ml with lid |
| Operating Pressure | 25-35 PSI recommended |
| Weight | 110g |
| Thread | 1/8" standard |
| Special Features | PTFE seals, compression-fit nozzle, cutaway handle |
| Warranty | 10 years (UK) |
📦 What's in the Box
🎨
Iwata Eclipse CS airbrush
with 0.35mm needle/nozzle installed
🥛
7ml gravity cup with lid
Mix colors, prevent drying during breaks
🔧
Maintenance tools
and documentation
🎁
BONUS: HHP-1001 Elastic Masking Putty
(£6 value)
⚠️ Air hose and compressor not included - purchase separately
🎯 Common Uses
🚗 Scale Models: Cars, planes, military models, detailed work
💫 Body Art: Professional makeup, temporary tattoos
🏺 Ceramics: Pottery decoration, glazing applications
🖼️ Fine Art: Canvas work, illustrations, artistic projects
💄 Cosmetics: Professional makeup application
🎨 Hobby Work: General crafts and creative projects
✨ Why the Eclipse CS is Different
🔧 Compression-Fit Nozzle
No threading to strip or over-tighten. Easier maintenance and longer nozzle life.
🛡️ PTFE Seals
Resist aggressive solvents and lacquers. Use harsh thinners without damage.
🖐️ Cutaway Handle
Ergonomic design for precision work and comfortable long sessions.
📏 Wide Spray Range
0.35mm to 50mm coverage - one of the most versatile nozzle sizes available.
💬 Straight Answers to Common Questions
🤔 Is this suitable for beginners?
It's more advanced than entry models, but dedicated beginners can learn on it. The dual-action gives full control, which is good for developing proper technique. If you're casual about the hobby, start with something simpler.
🎨 What paints actually work well?
Most paints when properly thinned. The PTFE seals handle aggressive solvents, so lacquers and enamels work fine. Acrylics, inks, cosmetics all good. Always thin to proper consistency - this isn't forgiving of thick paint.
📏 How fine can I realistically paint?
With practice, 0.5-0.8mm lines consistently. The 0.35mm nozzle is a compromise between detail and versatility. For ultra-fine work under 0.5mm, you'd want a smaller nozzle like 0.2mm.
🥛 What about the cup with lid?
Very practical. Mix colors in the cup, lid prevents drying during breaks. Makes color transitions smoother. The 7ml size is good for most work - not too small to constantly refill, not too large to waste paint.
🧼 Is cleaning actually easy?
Easier than most. The compression-fit nozzle pops out without tools, needle slides out easily. Takes 5-8 minutes for basic cleaning between colors, 15 minutes for full strip-down weekly.
💧 What if I get bubbling or spitting?
Usually dirty needle/nozzle, wrong paint consistency, or loose nozzle. Clean thoroughly, check paint thinning, ensure nozzle is properly seated. If problems persist, needle or nozzle may need replacing.
🚗 Is the 0.35mm good for scale models?
Yes, it's popular for 1/72 to 1/24 scale work. Handles both detail work and broader areas well. For tiny 1/144 scale details, you might want something finer, but it covers 90% of modeling needs.
🔧 Spare parts - what breaks and when?
Needles (£18) last 6-12 months with normal use. Nozzles (£22) last 1-2 years. PTFE seals rarely need replacing. Spring steel spring is very durable. We stock all common parts.
🔍 vs Other Iwata Models
| Model | Nozzle | Best For | Key Difference |
|---|---|---|---|
| Eclipse CS | 0.35mm | Versatile general use | Compression nozzle, PTFE seals |
| NEO CN | 0.35mm | Beginners | Simpler, budget-friendly |
| Revolution CR3 | 0.3mm | Hobby use | Mid-range option |
🛡️ 10-Year Warranty Details
Covers manufacturing defects and material faults for 10 years in the UK. Excludes wear items (needles, nozzles, seals) and damage from misuse. The PTFE seals and compression nozzle design contribute to the long warranty period.
This extended warranty reflects the build quality - most airbrush warranties are 1-2 years maximum.
🌟 Why Buy From Hobby Heaven
✅ Authorized Iwata dealer
full warranty coverage
full warranty coverage
🚚 Same-day dispatch
on orders before 2PM weekdays
on orders before 2PM weekdays
🎁 Free masking putty
worth £6 (limited time)
worth £6 (limited time)
💬 Technical support
from experienced users
from experienced users
📦 Stock Eclipse CS spare parts
for quick service
for quick service
Iwata Eclipse CS + Free Masking Putty
10-year warranty | Same-day dispatch | Expert support
HOBBY HEAVEN
Authentic supplies, honest advice, reliable service
Authentic supplies, honest advice, reliable service
Our brands
