Aves Apoxie Sculpt 454g (1lb) Red — Two-Part Epoxy Modelling Compound

About This Product

Aves Apoxie Sculpt is a two-part epoxy compound made by Aves Studio in the USA. Mix equal parts of Part A and Part B together, and you get a smooth, clay-like putty that you can sculpt, shape, texture, and tool for 1–3 hours before it begins to set. After 24 hours it cures into a rock-hard, permanent material with a semi-gloss finish.

It works like modelling clay but bonds like an epoxy — meaning it sticks permanently to most surfaces without needing primer or separate adhesive. Once cured, it can be sanded, drilled, carved, tapped, filed, and painted just like any rigid material.

This is the 454 g (1 lb) tub set in Red. Each set contains one 227 g (8 oz) tub of Part A and one 227 g (8 oz) tub of Part B. Red is a bold, saturated tone — a strong choice for lava and magma terrain, rust and weathering effects, or any project where the base material colour does the heavy lifting before paint. Mix Red with Brown for deep oxide tones, or with Yellow and Orange for fiery gradients. All 12 Apoxie Sculpt colours are intermixable.

◆ Lava, magma, and volcanic terrain — sculpt molten rivers, eruption effects, and glowing rock formations where the red base reads as heat and danger without any painting.

◆ Rust and weathering effects — build corroded pipes, rusted machinery, abandoned industrial scenery. A black or brown wash over cured red Apoxie creates instant convincing corrosion.

◆ Bold statement sculpts — red commands attention. Use it for decorative pieces, display sculptures, and art objects where the colour itself is part of the design.

◆ Fire and warm-spectrum mixing — Red Part A mixed with Yellow Part A gives orange and amber. Red with Orange gives deep flame. Red with Brown gives rich oxide earth. Add equal Part B to activate.

◆ High visibility while working — the saturated red tone makes it easy to see sculpted details, tool marks, and surface transitions during your working session.

SCULPTING Original figures, creatures, ornaments, and fine-art pieces from scratch.

CONVERSIONS Extend, reshape, and customise wargaming and tabletop miniatures.

TERRAIN Build rocks, walls, ground texture, rubble, and scenic elements for dioramas.

REPAIRS Fill chips, rebuild broken parts, restore damaged models and figures.

MODELS Model railways, architectural models, doll customisation, props, and cosplay parts.

FINE ART Embellish canvases, create 3D textures, build up surfaces on any substrate.

▸ Use cold water to reduce sticking and help hold fine detail while sculpting.

▸ Wear nitrile gloves — epoxy compounds are best handled with gloves. Aves recommends this in their own instructions.

▸ Wait for the 1-hour mark if you want to add fine details — the material firms up slightly and holds sharper impressions.

▸ Mix only what you need — once combined, Parts A and B will cure whether you use them or not. Portion sensibly.

▸ Red is perfect for lava and rust terrain — sculpt magma flows, volcanic rock, or rusted industrial scenery where the red base does most of the work. A light drybrush of orange or black over cured red Apoxie creates instant depth.

▸ Store sealed and cool — old stock can develop a surface film. Keep lids tight for maximum shelf life.

⚠ It cures rigid. If you need a flexible end result (cloaks, straps, thin parts that flex), Green Stuff or a flexible putty is a better choice.

⚠ The working time is a strength — and a commitment. Once mixed, Parts A and B will set in 24 hours whether you've finished or not.

⚠ Wear gloves. Non-toxic when cured and non-flammable, but skin contact during mixing should be avoided.

⚠ Colour pigment is in Part A only. Part B is always the same across all colours. Mix different Part A colours together before adding Part B to create custom shades.

✔️ 1 × Tub of Part A (Red) — 227 g (8 oz)

✔️ 1 × Tub of Part B — 227 g (8 oz)

✔️ Mixing and usage instructions on packaging