Hobby Heaven Zephyr 0.5mm Needle Cap (HHA-2402) – Front Crown Needle Guard
$5.24
Sale price $5.24Regular price
Shipping calculated at checkout.
In stock · same-day dispatch before 3pm
Store rating 4.9/5 · 2225 reviews
UK tracked delivery
Spare Part
Zephyr
Needle Cap
DWG · Product Information
PROJ: HHA-2402 · SHEET 2 / 4
01
View · Overview
Product overview
A Zephyr fitted with the larger 0.5 mm set (HHA-2002) carries a 0.5 mm needle cap at the very front, and this listing is that cap as a single spare. It threads onto the 0.5 mm nozzle cap and guards the needle point, the most delicate part of the airbrush, against bumps from the work surface, a stand or the model in your hand. Painters often take it off for close work and set it down, which is how it disappears; a replacement keeps the 0.5 mm needle covered.
Guards the point of needle HHA-2202 (0.5 mm)
Open-ended, so the spray passes freely and you can still check the needle point
Ridged rim for turning by hand
Threads onto the 0.5 mm nozzle cap HHA-2302
Ships in foam in a clear tube marked 0.5mm
When to take it off
Removing the cap lets you see the point, get nearer the model and clear a dried bead of paint from the needle without dismantling anything; the needle is exposed while you do. Leave it fitted for general spraying, take it off only for close detail, and refit it before the airbrush goes back in its holder.
Is it really the needle cap?
Symptom
Part
Front guard missing, bent or will not thread
HHA-2402, this listing
Nozzle cap marked or lost
Nozzle cap HHA-2302 (0.5 mm)
Needle point curled
Needle HHA-2202 (0.5 mm)
Front end damaged in more than one place
Set HHA-2002 (all four 0.5 mm parts)
A dented guard usually means it did its job, but check the needle point under magnification anyway.
When to replace it
Replace it if the rim is bent or burred, if the thread binds, or if the cap sits crooked or touches the needle point. First rule out dried paint, which causes most of these complaints: soaking it in cleaner, then working the inside with a soft brush from the HHA-7201 set, usually puts it right.
Fitting
Disconnect the air, check that the nozzle cap below it is seated, then turn the needle cap on with your fingers. If it catches, unscrew it and line it up again; never force it. Finger-tight is enough. Keep the uncovered front away from surfaces while it is off.
Worth knowing
Changing needle caps will not change the spray width; that is set by the needle together with the nozzle and its cap. Returning to 0.3 mm means switching to needle cap HHA-2401. Both sizes look alike, so keep each in its marked tube. We vouch for its fit on the Zephyr and on nothing else, and it is numbered within the Zephyr system, which is still expanding.
03
Notes · Q & A
Which parts fit the Zephyr, and will they fit another airbrush?+
Needles, nozzles, caps and body parts are made for the Hobby Heaven Zephyr (HHA-1001), and that is the only airbrush we confirm them on. The 7 ml cup and the nozzle wrench may suit other airbrushes, but that is untested. Quick disconnects, hoses, the moisture trap and the thread adapters are universal accessories built around the standard 1/8" BSP airbrush thread, and the cleaning brushes, needles and reamer are general tools. The Compatible with row on each page says which group a part belongs to.
How do I find the right part number?+
Every part has its own HHA number, printed on its box. HHA-20xx are matched needle, nozzle and cap sets, 21xx nozzles, 22xx needles, 23xx nozzle caps and 24xx needle caps; a last digit of 1 means 0.3 mm and 2 means 0.5 mm. HHA-3xxx are body parts, 4xxx cups, 5xxx air connections and 7xxx tools and cleaning. The system keeps growing: new parts join under the same numbering, and existing numbers never change meaning.
Can the Zephyr spray at 0.5 mm?+
Yes. It comes set up at 0.3 mm, and the HHA-2002 set converts it: a 0.5 mm needle, a 0.5 mm nozzle with its O-ring, a nozzle cap and a needle cap. Those four parts change together, because needle, nozzle and caps must all be the same size. The body parts (HHA-3xxx) are the same for both setups.
How does the Zephyr connect to my compressor?+
The air inlet is a 1/8" BSP male thread. Our braided hoses have a 1/8" BSP female nut at both ends, and the quick disconnects take the standard 5 mm hobby plug. Many compressors have a 1/4" BSP outlet and need an adapter; US compressors may have 1/4" NPT, which does not mate with BSP and needs an NPT-to-BSP adapter. Spray at 15–40 PSI and never above 40.
What are the seals made of, and how should I clean the parts?+
Every seal in the Zephyr is a rubber O-ring. Flush with airbrush cleaner between colours and strip-clean after a session, but keep the assembled air valve (HHA-3401) out of solvent baths, as its pin, piston, spring and O-ring come as one unit. For a blocked nozzle, soak it out of the airbrush first; the reamer (HHA-7301) is the last resort, turned and never pushed.
04
Notes · Logistics
Shipping
Orders placed before 3pm (Mon–Fri) are dispatched the same day. UK delivery is by Royal Mail 24 Tracked. Free UK delivery on orders over £70. International delivery available via Royal Mail International Tracked or courier.
Returns
If you're not happy with your purchase, contact us within 30 days for a full refund or exchange. Items must be unused and in original packaging.