HHA-5103 set with the plug clicked into the coupler, beside its Hobby Heaven blister: 1 male plug and 1 female coupler

Hobby Heaven Airbrush Quick Disconnect Set (HHA-5103) – 1/8" BSP Coupler + Plug

$7.33
Sale price  $7.33 Regular price 
Skip to product information
HHA-5103 set with the plug clicked into the coupler, beside its Hobby Heaven blister: 1 male plug and 1 female coupler

Hobby Heaven Airbrush Quick Disconnect Set (HHA-5103) – 1/8" BSP Coupler + Plug

$7.33
Sale price  $7.33 Regular price 
Shipping calculated at checkout.

In stock · same-day dispatch before 3pm

  • Store rating 4.9/5 · 2225 reviews
  • UK tracked delivery
  • Accessory
  • Quick Disconnect

DWG · Product Information

PROJ: HHA-5103 · SHEET 2 / 4

View · Overview

Product overview

HHA-5103 is a matched pair for a click-on air connection: a coupler (HHA-5101) that screws into the airbrush end of the hose and a plug (HHA-5102) that screws onto the air inlet of the airbrush. With both fitted, the airbrush clicks onto the hose and comes off again with a pull of the knurled sleeve, without working any threads or switching the compressor off, because the coupler closes itself whenever the plug is out. It is the same pair that ships with the Hobby Heaven Zephyr, so it suits a second workstation, a replacement for a lost pair, or a first quick-release setup on another airbrush.

  • Coupler: 1/8" BSP male thread, for the hose end
  • Plug: female 1/8" BSP thread and a 5 mm nipple, for the airbrush
  • Automatic air shut-off inside the coupler; no flow valve
  • Change airbrushes, or walk one over to the sink, in seconds
  • Both halves share one Hobby Heaven blister, labelled HHA-5103

Male and female, explained

The names refer to the click joint rather than the threads, so each half carries the opposite thread to the one its name suggests. The "female" coupler is the socket the plug enters, yet its thread is on the outside to suit the hose. The "male" plug carries the nipple, yet its thread is inside to suit the airbrush inlet.

Leak at the set, or elsewhere?

Sign Cause, then cure
Hiss at either threaded joint Wrap thread-sealing tape round the male thread (the coupler's, or the airbrush inlet) and screw it back by hand
Hiss at the click joint, plug home Worn seal inside the coupler: replace it, HHA-5101
No air with the airbrush connected Plug not fully locked, so the coupler is still closed
A half will not screw on Your airbrush or hose uses another fitting; on a Badger, Paasche or Aztek, fit a brand adapter to convert to 1/8" BSP first

Fitting

Air off and hose bled. Wrap the coupler's thread and turn it into the hose; wrap the airbrush inlet and turn the plug onto it. Hand pressure is enough for both. Restore the air, press the plug in until you hear the click, then brush soapy water across the joints; any joint that bubbles needs another look.

Worth knowing

The coupler and plug are also sold singly (HHA-5101, HHA-5102), so a plug for each extra airbrush can be added later. To trim the air at your hand as well, choose the set with an air flow valve, HHA-5104. The 1/8" BSP thread is the usual air fitting across hobby airbrushes and hoses: Iwata, Harder & Steenbeck, Sparmax, Grex and Master use it, and so does the Zephyr. This is one of the numbered parts of the Hobby Heaven Zephyr range, which keeps growing; once a number is given, it always means the same part.

Notes · Q & A

Which parts fit the Zephyr, and will they fit another airbrush?

Needles, nozzles, caps and body parts are made for the Hobby Heaven Zephyr (HHA-1001), and that is the only airbrush we confirm them on. The 7 ml cup and the nozzle wrench may suit other airbrushes, but that is untested. Quick disconnects, hoses, the moisture trap and the thread adapters are universal accessories built around the standard 1/8" BSP airbrush thread, and the cleaning brushes, needles and reamer are general tools. The Compatible with row on each page says which group a part belongs to.

How do I find the right part number?

Every part has its own HHA number, printed on its box. HHA-20xx are matched needle, nozzle and cap sets, 21xx nozzles, 22xx needles, 23xx nozzle caps and 24xx needle caps; a last digit of 1 means 0.3 mm and 2 means 0.5 mm. HHA-3xxx are body parts, 4xxx cups, 5xxx air connections and 7xxx tools and cleaning. The system keeps growing: new parts join under the same numbering, and existing numbers never change meaning.

Can the Zephyr spray at 0.5 mm?

Yes. It comes set up at 0.3 mm, and the HHA-2002 set converts it: a 0.5 mm needle, a 0.5 mm nozzle with its O-ring, a nozzle cap and a needle cap. Those four parts change together, because needle, nozzle and caps must all be the same size. The body parts (HHA-3xxx) are the same for both setups.

How does the Zephyr connect to my compressor?

The air inlet is a 1/8" BSP male thread. Our braided hoses have a 1/8" BSP female nut at both ends, and the quick disconnects take the standard 5 mm hobby plug. Many compressors have a 1/4" BSP outlet and need an adapter; US compressors may have 1/4" NPT, which does not mate with BSP and needs an NPT-to-BSP adapter. Spray at 15–40 PSI and never above 40.

What are the seals made of, and how should I clean the parts?

Every seal in the Zephyr is a rubber O-ring. Flush with airbrush cleaner between colours and strip-clean after a session, but keep the assembled air valve (HHA-3401) out of solvent baths, as its pin, piston, spring and O-ring come as one unit. For a blocked nozzle, soak it out of the airbrush first; the reamer (HHA-7301) is the last resort, turned and never pushed.

Notes · Logistics

Shipping

Orders placed before 3pm (Mon–Fri) are dispatched the same day. UK delivery is by Royal Mail 24 Tracked. Free UK delivery on orders over £70. International delivery available via Royal Mail International Tracked or courier.

Returns

If you're not happy with your purchase, contact us within 30 days for a full refund or exchange. Items must be unused and in original packaging.

Table · Specification

Technical specifications

Product details
Brand
Hobby Heaven
Product code
HHA-5103
Type
Accessories
Shipping weight
100 g
Barcode
5061001183418
Made in
China
Dimensions & contents
Pieces
2
Materials & finish
Format
Quick-disconnect set
Usage & compatibility
Thread
1/8" BSP: coupler male (hose side), plug female (airbrush side)
Compatible with
Hobby Heaven Zephyr
Set contents
Other parts
Also in this range
Zephyr airbrush system

Product

Hobby Heaven Airbrush Quick Disconnect Set (HHA-5103) – 1/8" BSP Coupler + Plug

Code (proj)

HHA-5103

Ship. weight

100 g

Brand

Hobby Heaven

Hobby Heaven · By hobbyists, for hobbyists

Sheet 2 / 4

End of sheet

Complete The Job