HHA-5102 male quick-disconnect plug beside its Hobby Heaven blister, 1 plug supplied, female coupler sold separately

Hobby Heaven Airbrush Quick Disconnect Plug, Male (HHA-5102) – 1/8" BSP, 5mm Nipple

$4.29
Sale price  $4.29 Regular price 
Skip to product information
HHA-5102 male quick-disconnect plug beside its Hobby Heaven blister, 1 plug supplied, female coupler sold separately

Hobby Heaven Airbrush Quick Disconnect Plug, Male (HHA-5102) – 1/8" BSP, 5mm Nipple

$4.29
Sale price  $4.29 Regular price 
Shipping calculated at checkout.

In stock · same-day dispatch before 3pm

  • Store rating 4.9/5 · 2225 reviews
  • UK tracked delivery
  • Accessory
  • Quick Disconnect

DWG · Product Information

PROJ: HHA-5102 · SHEET 2 / 4

View · Overview

Product overview

HHA-5102 is the airbrush half of a quick-disconnect connection: a small plug that is screwed onto the air inlet and then left in place. Its smooth 5 mm nipple slides into a coupler on the hose (HHA-5101) and is held there until the coupler's sleeve is drawn back. The plug has no valve of its own, because the automatic shut-off lives in the coupler; that keeps it small and inexpensive, so most painters leave one on each airbrush they own and keep a single coupler on the hose. It is the same plug that comes in the box with the Hobby Heaven Zephyr.

  • Female 1/8" BSP thread, to suit an airbrush whose inlet is 1/8" BSP
  • Standard 5 mm nipple for airbrush quick-disconnect couplers
  • Knurled collar, so it goes on and comes off by hand
  • No internal valve: the coupler does the shutting off
  • Single plug, Hobby Heaven blister, HHA-5102 on the label; coupler sold separately

Plug, or something else?

Symptom What to check
Hissing at the airbrush joint Inlet thread unsealed: unscrew, wind a little thread-sealing tape onto the airbrush's inlet and refit by hand
Hissing where it clicks in Push the plug fully home; if a clean, undamaged nipple still hisses, suspect the coupler's seal (HHA-5101)
Will not click into a coupler you already own That coupler may not be a 5 mm system; pair the plug with our coupler instead
Will not start on the airbrush The inlet is a different fitting: Badger, Paasche and Aztek airbrushes each want their own brand adapter first
Nipple dented, scored or bent Replace the plug, since a damaged nipple cannot seal

Signs it needs replacing

A nipple nicked, scored or bent after a drop, a thread that has crossed or no longer pulls up snug, or a plug that keeps leaking at a coupler which seals perfectly with another plug.

Fitting

With the air off, unscrew the hose or the old plug from the airbrush. Tape the airbrush's inlet thread, since the plug's own thread is on the inside, and turn the plug on by hand until it seats; no tools are needed. Wipe the nipple before every connection, because grit carried into the coupler wears its seal.

Worth knowing

Counting is simple: a plug for every airbrush, a coupler for every hose, so a single compressor running three airbrushes calls for three plugs but just one coupler. Iwata, Harder & Steenbeck, Sparmax, Grex, Master and the Zephyr all use a 1/8" BSP male inlet, which is what this plug is made for, and it clicks into our plain coupler HHA-5101 as well as the valved set HHA-5104. Want both halves at once? The pair is sold as HHA-5103. This is one of the numbered parts of the Hobby Heaven Zephyr range, which keeps growing; once a number is given, it always means the same part.

Notes · Q & A

Which parts fit the Zephyr, and will they fit another airbrush?

Needles, nozzles, caps and body parts are made for the Hobby Heaven Zephyr (HHA-1001), and that is the only airbrush we confirm them on. The 7 ml cup and the nozzle wrench may suit other airbrushes, but that is untested. Quick disconnects, hoses, the moisture trap and the thread adapters are universal accessories built around the standard 1/8" BSP airbrush thread, and the cleaning brushes, needles and reamer are general tools. The Compatible with row on each page says which group a part belongs to.

How do I find the right part number?

Every part has its own HHA number, printed on its box. HHA-20xx are matched needle, nozzle and cap sets, 21xx nozzles, 22xx needles, 23xx nozzle caps and 24xx needle caps; a last digit of 1 means 0.3 mm and 2 means 0.5 mm. HHA-3xxx are body parts, 4xxx cups, 5xxx air connections and 7xxx tools and cleaning. The system keeps growing: new parts join under the same numbering, and existing numbers never change meaning.

Can the Zephyr spray at 0.5 mm?

Yes. It comes set up at 0.3 mm, and the HHA-2002 set converts it: a 0.5 mm needle, a 0.5 mm nozzle with its O-ring, a nozzle cap and a needle cap. Those four parts change together, because needle, nozzle and caps must all be the same size. The body parts (HHA-3xxx) are the same for both setups.

How does the Zephyr connect to my compressor?

The air inlet is a 1/8" BSP male thread. Our braided hoses have a 1/8" BSP female nut at both ends, and the quick disconnects take the standard 5 mm hobby plug. Many compressors have a 1/4" BSP outlet and need an adapter; US compressors may have 1/4" NPT, which does not mate with BSP and needs an NPT-to-BSP adapter. Spray at 15–40 PSI and never above 40.

What are the seals made of, and how should I clean the parts?

Every seal in the Zephyr is a rubber O-ring. Flush with airbrush cleaner between colours and strip-clean after a session, but keep the assembled air valve (HHA-3401) out of solvent baths, as its pin, piston, spring and O-ring come as one unit. For a blocked nozzle, soak it out of the airbrush first; the reamer (HHA-7301) is the last resort, turned and never pushed.

Notes · Logistics

Shipping

Orders placed before 3pm (Mon–Fri) are dispatched the same day. UK delivery is by Royal Mail 24 Tracked. Free UK delivery on orders over £70. International delivery available via Royal Mail International Tracked or courier.

Returns

If you're not happy with your purchase, contact us within 30 days for a full refund or exchange. Items must be unused and in original packaging.

Table · Specification

Technical specifications

Product details
Brand
Hobby Heaven
Product code
HHA-5102
Type
Accessories
Shipping weight
100 g
Barcode
5061001183401
Made in
China
Materials & finish
Format
Quick-disconnect plug
Usage & compatibility
Thread
1/8" BSP female (screws onto the airbrush inlet)
Compatible with
Hobby Heaven Zephyr
Other parts
Also in this range
Zephyr airbrush system

Product

Hobby Heaven Airbrush Quick Disconnect Plug, Male (HHA-5102) – 1/8" BSP, 5mm Nipple

Code (proj)

HHA-5102

Ship. weight

100 g

Brand

Hobby Heaven

Hobby Heaven · By hobbyists, for hobbyists

Sheet 2 / 4

End of sheet

Complete The Job