HHA-5201 1.8 m black braided airbrush hose beside its Hobby Heaven retail bag with SKU label and barcode

Hobby Heaven Braided Airbrush Hose 1.8m (HHA-5201) – 1/8" BSP Both Ends

$8.22
Sale price  $8.22 Regular price 
Skip to product information
HHA-5201 1.8 m black braided airbrush hose beside its Hobby Heaven retail bag with SKU label and barcode

Hobby Heaven Braided Airbrush Hose 1.8m (HHA-5201) – 1/8" BSP Both Ends

$8.22
Sale price  $8.22 Regular price 
Taxes included. Shipping calculated at checkout.

In stock · same-day dispatch before 3pm

  • Store rating 4.9/5 · 2224 reviews
  • UK tracked delivery
  • Accessory
  • Hose

DWG · Product Information

PROJ: HHA-5201 · SHEET 2 / 4

View · Overview

Product overview

HHA-5201 is a 1.8 m air hose for linking an airbrush to its compressor. A knurled nut threaded 1/8" BSP female sits on each end, the size most hobby airbrushes and compressor regulators use for their air connections, and both nuts are done up with the fingers alone. A black braided sleeve covers the full length. That length suits a compressor standing on the desk or on a shelf close behind it, and it matches the hose packed with many compressor kits, which makes this a straight swap when an old one starts leaking or goes missing.

  • 1.8 m long, about 6 ft
  • Identical nut at both ends, 1/8" BSP female, so it goes on either way round
  • Black braided outer cover from nut to nut
  • Connects directly to the Hobby Heaven Zephyr and other airbrushes with a 1/8" BSP male inlet
  • Packed in a Hobby Heaven bag labelled HHA-5201 with its barcode

What it connects to

Airbrushes from Iwata, Harder & Steenbeck, Sparmax, Grex or Master fit straight on, as the Zephyr does; for Badger, Paasche or Aztek, add that brand's adapter. Bigger compressors often have a 1/4" BSP outlet, which calls for a reducer such as the one in HHA-5401, and US-made machines may use 1/4" NPT, a different thread entirely. For click-on connections, fit a quick-disconnect coupler (HHA-5103 or HHA-5104) to the hose. For more reach, the 3 m hose is HHA-5202.

Hose, or something else?

Symptom Likely cause and remedy
Hissing at one end The joint, not the hose: reseat the nut; if that fails, tape the male thread
Nut refuses to start, or tightens after a single turn A mismatched thread on the far side: stop and use an adapter
Water spitting at the nozzle Condensation: drain the compressor's trap, or add an inline trap (HHA-5301)
Air escaping along the hose itself A split, usually after crushing or a hard kink: replace the hose

Signs it needs replacing

Leaks along the length rather than at a nut, a cracked nut or stripped thread, or a section that has been cut, crushed, melted or left permanently flattened.

Fitting and care

With the compressor switched off and the line empty, run one nut onto the outlet and the second onto the airbrush or coupler, fingers only; pliers can flatten the knurled grip. Brush soapy water across both joints with the air on: bubbles mark a leak. Store it in loose coils and keep thinners, hot tools and blades away from it.

Worth knowing

Joining two hoses takes a 1/8" BSP male × male joiner, which HHA-5401 includes, though one longer hose means a joint fewer. This is one of the numbered parts of the Hobby Heaven Zephyr range, which keeps growing; once a number is given, it always means the same part.

Notes · Q & A

Which parts fit the Zephyr, and will they fit another airbrush?

Needles, nozzles, caps and body parts are made for the Hobby Heaven Zephyr (HHA-1001), and that is the only airbrush we confirm them on. The 7 ml cup and the nozzle wrench may suit other airbrushes, but that is untested. Quick disconnects, hoses, the moisture trap and the thread adapters are universal accessories built around the standard 1/8" BSP airbrush thread, and the cleaning brushes, needles and reamer are general tools. The Compatible with row on each page says which group a part belongs to.

How do I find the right part number?

Every part has its own HHA number, printed on its box. HHA-20xx are matched needle, nozzle and cap sets, 21xx nozzles, 22xx needles, 23xx nozzle caps and 24xx needle caps; a last digit of 1 means 0.3 mm and 2 means 0.5 mm. HHA-3xxx are body parts, 4xxx cups, 5xxx air connections and 7xxx tools and cleaning. The system keeps growing: new parts join under the same numbering, and existing numbers never change meaning.

Can the Zephyr spray at 0.5 mm?

Yes. It comes set up at 0.3 mm, and the HHA-2002 set converts it: a 0.5 mm needle, a 0.5 mm nozzle with its O-ring, a nozzle cap and a needle cap. Those four parts change together, because needle, nozzle and caps must all be the same size. The body parts (HHA-3xxx) are the same for both setups.

How does the Zephyr connect to my compressor?

The air inlet is a 1/8" BSP male thread. Our braided hoses have a 1/8" BSP female nut at both ends, and the quick disconnects take the standard 5 mm hobby plug. Many compressors have a 1/4" BSP outlet and need an adapter; US compressors may have 1/4" NPT, which does not mate with BSP and needs an NPT-to-BSP adapter. Spray at 15–40 PSI and never above 40.

What are the seals made of, and how should I clean the parts?

Every seal in the Zephyr is a rubber O-ring. Flush with airbrush cleaner between colours and strip-clean after a session, but keep the assembled air valve (HHA-3401) out of solvent baths, as its pin, piston, spring and O-ring come as one unit. For a blocked nozzle, soak it out of the airbrush first; the reamer (HHA-7301) is the last resort, turned and never pushed.

Notes · Logistics

Shipping

Orders placed before 3pm (Mon–Fri) are dispatched the same day. UK delivery is by Royal Mail 24 Tracked. Free UK delivery on orders over £70. International delivery available via Royal Mail International Tracked or courier.

Returns

If you're not happy with your purchase, contact us within 30 days for a full refund or exchange. Items must be unused and in original packaging.

Table · Specification

Technical specifications

Product details
Brand
Hobby Heaven
Product code
HHA-5201
Type
Accessories
Shipping weight
230 g
Barcode
5061001183456
Made in
China
Dimensions & contents
Length
1.8 m
Materials & finish
Format
1.8 m braided hose
Usage & compatibility
Thread
1/8" BSP female, both ends
Other parts
Also in this range
Zephyr airbrush system

Product

Hobby Heaven Braided Airbrush Hose 1.8m (HHA-5201) – 1/8" BSP Both Ends

Code (proj)

HHA-5201

Ship. weight

230 g

Brand

Hobby Heaven

Hobby Heaven · By hobbyists, for hobbyists

Sheet 2 / 4

End of sheet

Complete The Job