Hobby Heaven Zephyr 0.3mm Needle & Nozzle Set (HHA-2001) – Matched Needle, Nozzle and Caps
$12.27
Sale price $12.27Regular price
Shipping calculated at checkout.
In stock · same-day dispatch before 3pm
Store rating 4.9/5 · 2225 reviews
UK tracked delivery
Spare Part
Zephyr
0.3mm
Needle
Needle Cap
Nozzle
DWG · Product Information
PROJ: HHA-2001 · SHEET 2 / 4
01
View · Overview
Product overview
HHA-2001 puts the complete 0.3 mm front end of the Hobby Heaven Zephyr in one box: a needle, a nozzle with its rubber O-ring, the nozzle cap and the needle cap, all in the size the airbrush is built around. Every Zephyr part carries its own HHA number, so when a tip bends or a nozzle cracks you can reorder exactly this set instead of hunting for a generic needle that may never seat. Changing all four together restores the matched pairing, and the Zephyr system keeps growing under the same numbering.
Four parts, one of each, every one of them 0.3 mm
Nozzle cap with an external thread, needle cap with an internal one; both have knurled rims for grip
Rubber O-ring already fitted to the nozzle
Padded tube for the needle, padded container for the small parts, both set into EVA foam
Made for the Zephyr; we do not claim a fit on any other airbrush
Is it really the needle and nozzle?
What you notice
Likely reason
Try first
Spray drifts sideways or spits
Bent needle tip or a damaged nozzle
Look for dried paint at the tip
Paint still comes out with the lever all the way forward
The needle has stopped closing in the nozzle
Clean the nozzle bore, then inspect the tip
Bubbles rise in the cup while you spray
Air leaking back because the nozzle is loose or worn
Snug the nozzle gently, check the O-ring
Nozzle tip visibly cracked or chipped
Overtightening, or the needle forced into it
None: a split nozzle cannot be repaired
A cap is lost or its thread stripped
A drop or general wear
Fit new caps
Dried paint causes most of these symptoms too, so strip and clean first. If the fault survives a proper clean, the parts are worn out.
Fitting the set
Disconnect the air before you start. Take the handle off, loosen the needle chucking nut, unscrew the nozzle and draw the old needle out through the front. Refit in this order: the new needle in from the front, then the nozzle, screwed in by hand and given only a slight nudge with the wrench, since overtightening splits it. Add both caps, ease the needle forward until it just touches its seat, tighten the chucking nut and put the handle back. No wrench in this box: the Zephyr ships with one, and HHA-7101 is that wrench on its own.
Worth knowing
Only the needle damaged? The Zephyr's own box carries one extra 0.3 mm needle. Reach for this set when the nozzle or a cap has worn as well. The needle cap is the open crown at the front that guards the needle tip; you can take it off for very close work. Never mix sizes: pushing the 0.5 mm needle into this smaller nozzle ruins the spray and risks damaging both; convert with the HHA-2002 set instead.
03
Notes · Q & A
Which parts fit the Zephyr, and will they fit another airbrush?+
Needles, nozzles, caps and body parts are made for the Hobby Heaven Zephyr (HHA-1001), and that is the only airbrush we confirm them on. The 7 ml cup and the nozzle wrench may suit other airbrushes, but that is untested. Quick disconnects, hoses, the moisture trap and the thread adapters are universal accessories built around the standard 1/8" BSP airbrush thread, and the cleaning brushes, needles and reamer are general tools. The Compatible with row on each page says which group a part belongs to.
How do I find the right part number?+
Every part has its own HHA number, printed on its box. HHA-20xx are matched needle, nozzle and cap sets, 21xx nozzles, 22xx needles, 23xx nozzle caps and 24xx needle caps; a last digit of 1 means 0.3 mm and 2 means 0.5 mm. HHA-3xxx are body parts, 4xxx cups, 5xxx air connections and 7xxx tools and cleaning. The system keeps growing: new parts join under the same numbering, and existing numbers never change meaning.
Can the Zephyr spray at 0.5 mm?+
Yes. It comes set up at 0.3 mm, and the HHA-2002 set converts it: a 0.5 mm needle, a 0.5 mm nozzle with its O-ring, a nozzle cap and a needle cap. Those four parts change together, because needle, nozzle and caps must all be the same size. The body parts (HHA-3xxx) are the same for both setups.
How does the Zephyr connect to my compressor?+
The air inlet is a 1/8" BSP male thread. Our braided hoses have a 1/8" BSP female nut at both ends, and the quick disconnects take the standard 5 mm hobby plug. Many compressors have a 1/4" BSP outlet and need an adapter; US compressors may have 1/4" NPT, which does not mate with BSP and needs an NPT-to-BSP adapter. Spray at 15–40 PSI and never above 40.
What are the seals made of, and how should I clean the parts?+
Every seal in the Zephyr is a rubber O-ring. Flush with airbrush cleaner between colours and strip-clean after a session, but keep the assembled air valve (HHA-3401) out of solvent baths, as its pin, piston, spring and O-ring come as one unit. For a blocked nozzle, soak it out of the airbrush first; the reamer (HHA-7301) is the last resort, turned and never pushed.
04
Notes · Logistics
Shipping
Orders placed before 3pm (Mon–Fri) are dispatched the same day. UK delivery is by Royal Mail 24 Tracked. Free UK delivery on orders over £70. International delivery available via Royal Mail International Tracked or courier.
Returns
If you're not happy with your purchase, contact us within 30 days for a full refund or exchange. Items must be unused and in original packaging.