Hobby Heaven Airbrush Thread Adapter Set, 7 pcs (HHA-5401) – 1/8", 1/4" BSP and M5
In stock · same-day dispatch before 3pm
- Store rating 4.9/5 · 2225 reviews
- UK tracked delivery
- Accessory
- Thread Adapter
DWG · Product Information
PROJ: HHA-5401 · SHEET 2 / 4
View · Overview
Product overview
HHA-5401 is a box of seven thread adapters for joining airbrush equipment whose connections do not match. Airbrushes and their hoses mostly use 1/8" BSP, plenty of compressors, regulators and tanks use the larger 1/4" BSP, and the fine M5 × 0.5 turns up on mini compressors and some older hoses. Three adapters are male at both ends, for joining two female parts; four are female at one end and male at the other, for stepping between sizes. Choose ends of the same size as, and opposite gender to, the parts being joined.
- Joiners: three, male at both ends
- Converters: four, female at one end and male at the other
- Covers 1/8" BSP, 1/4" BSP and M5 × 0.5, all nominal sizes
- Seven pieces, boxed and labelled HHA-5401
Which adapter for which joint?
| Your joint | Adapter |
|---|---|
| 1/4" BSP male compressor or regulator outlet, 1/8" BSP hose | 1/4" BSP F × 1/8" BSP M |
| M5 male outlet on a mini compressor, 1/8" BSP hose | M5 F × 1/8" BSP M |
| 1/4" BSP male outlet, hose ending in an M5 female nut | 1/4" BSP F × M5 M |
| Two 1/8" BSP hoses end to end | 1/8" × 1/8" BSP joiner |
| 1/4" BSP female port on a regulator or tank, 1/8" BSP hose | 1/8" × 1/4" BSP joiner |
| 1/8" BSP male outlet, 1/4" BSP female nut on the other part | 1/8" BSP F × 1/4" BSP M |
| Two 1/4" BSP female parts | 1/4" × 1/4" BSP joiner |
Identifying a thread
Measure a male thread across its crests with a calliper. Nominal outside diameters are roughly 9.7 mm for 1/8" BSP, 13.2 mm for 1/4" BSP and 5 mm for M5. To check a female thread, offer up the matching adapter end with your fingers; a clean start and two free turns mean the same thread.
What it will not do
No NPT: 1/4" NPT, common on US compressors, may start in a 1/4" BSP thread but will not seal. For Badger, Paasche or Aztek inlets, use that brand's adapter. And these are plain threaded joints; for click-on connectors, see HHA-5103 and HHA-5104.
Fitting and care
Begin each thread with your fingers and stop if it binds. Aim for hand-tight, with at most a light extra turn from a spanner, since small threads, M5 above all, strip easily. A hissing joint gets thread-seal tape on its male thread, kept off the tip. Chain as few adapters as possible, and retire any with a damaged thread.
Worth knowing
The Zephyr itself takes a standard hose with no adapter; these earn their place at the compressor and around the workshop. This is one of the numbered parts of the Hobby Heaven Zephyr range, which keeps growing; once a number is given, it always means the same part.
Notes · Q & A
Which parts fit the Zephyr, and will they fit another airbrush?
Needles, nozzles, caps and body parts are made for the Hobby Heaven Zephyr (HHA-1001), and that is the only airbrush we confirm them on. The 7 ml cup and the nozzle wrench may suit other airbrushes, but that is untested. Quick disconnects, hoses, the moisture trap and the thread adapters are universal accessories built around the standard 1/8" BSP airbrush thread, and the cleaning brushes, needles and reamer are general tools. The Compatible with row on each page says which group a part belongs to.
How do I find the right part number?
Every part has its own HHA number, printed on its box. HHA-20xx are matched needle, nozzle and cap sets, 21xx nozzles, 22xx needles, 23xx nozzle caps and 24xx needle caps; a last digit of 1 means 0.3 mm and 2 means 0.5 mm. HHA-3xxx are body parts, 4xxx cups, 5xxx air connections and 7xxx tools and cleaning. The system keeps growing: new parts join under the same numbering, and existing numbers never change meaning.
Can the Zephyr spray at 0.5 mm?
Yes. It comes set up at 0.3 mm, and the HHA-2002 set converts it: a 0.5 mm needle, a 0.5 mm nozzle with its O-ring, a nozzle cap and a needle cap. Those four parts change together, because needle, nozzle and caps must all be the same size. The body parts (HHA-3xxx) are the same for both setups.
How does the Zephyr connect to my compressor?
The air inlet is a 1/8" BSP male thread. Our braided hoses have a 1/8" BSP female nut at both ends, and the quick disconnects take the standard 5 mm hobby plug. Many compressors have a 1/4" BSP outlet and need an adapter; US compressors may have 1/4" NPT, which does not mate with BSP and needs an NPT-to-BSP adapter. Spray at 15–40 PSI and never above 40.
What are the seals made of, and how should I clean the parts?
Every seal in the Zephyr is a rubber O-ring. Flush with airbrush cleaner between colours and strip-clean after a session, but keep the assembled air valve (HHA-3401) out of solvent baths, as its pin, piston, spring and O-ring come as one unit. For a blocked nozzle, soak it out of the airbrush first; the reamer (HHA-7301) is the last resort, turned and never pushed.
Notes · Logistics
Shipping
Returns
Table · Specification
Technical specifications
Product
Hobby Heaven Airbrush Thread Adapter Set, 7 pcs (HHA-5401) – 1/8", 1/4" BSP and M5
Code (proj)
HHA-5401
Ship. weight
230 g
Brand
Hobby Heaven
Hobby Heaven · By hobbyists, for hobbyists
Sheet 2 / 4
End of sheet