HHA-3203 Zephyr airbrush spring case shown enlarged beside its Hobby Heaven blister pack, 1 spring case supplied

Hobby Heaven Zephyr Spring Case (HHA-3203) – Replacement Airbrush Spare

$5.52
Sale price  $5.52 Regular price 
Skip to product information
HHA-3203 Zephyr airbrush spring case shown enlarged beside its Hobby Heaven blister pack, 1 spring case supplied

Hobby Heaven Zephyr Spring Case (HHA-3203) – Replacement Airbrush Spare

$5.52
Sale price  $5.52 Regular price 
Taxes included. Shipping calculated at checkout.

In stock · same-day dispatch before 3pm

  • Store rating 4.9/5 · 2224 reviews
  • UK tracked delivery
  • Spare Part
  • Zephyr
  • Spring

DWG · Product Information

PROJ: HHA-3203 · SHEET 2 / 4

View · Overview

Product overview

Seated in the tail of the Hobby Heaven Zephyr body, this threaded sleeve keeps the needle return spring pressed onto the needle chucking guide. Draw the trigger rearwards and the guide squeezes the spring inside the case; let go and the compressed spring drives guide, needle and trigger forward until the needle shuts the nozzle and the paint stops. The sleeve is hollow, so the guide's tail and the needle pass straight through on their way to the chucking nut; the rear control knob sits behind. It goes in until it seats and offers no tension adjustment.

  • External thread and fluted grip, turned by hand
  • Hollow bore for spring, guide tail and needle
  • The spring is not in the pack: move the one from your old case across
  • Fits a 0.3 mm Zephyr and a 0.5 mm conversion equally; built for the Zephyr
  • Hobby Heaven blister, label HHA-3203 with barcode

Is the spring case at fault?

What happens Check this
Slack in the trigger Case not fully in: turn it by hand until it bottoms out
Case missing This part, plus the spring that lived inside it
Starts crooked, cross-threads or turns stiffly Damaged thread: this part; inspect the body's thread as well
Bent or dented, guide catches inside This part
Needle ignores the trigger Chucking nut (HHA-3202)
No return after a strip-down Guide (HHA-3201) reseated at a wrong angle

Signs it needs replacing

Its thread is burred, flattened or crossed; the case is dented or bent, typically after the airbrush landed on its tail; or the fluted grip is so marked by pliers that fingers can no longer turn it. A case that has merely backed off needs screwing in, nothing more.

Fitting

Have the quick start guide's parts diagram open and disconnect the air. Slacken the nut, take off handle and nozzle, and withdraw the needle forwards. Unscrew the old case together with the knob and keep its spring. Confirm the guide plate still sits behind the trigger, drop the spring in, start the new case square by hand and turn it home, then refit the knob. Return the needle from the front, refit nozzle and caps, rest the needle softly in the nozzle and lock it with the nut, hand-tight.

Worth knowing

Fingers only: pliers mark the grip. Paint residue or old lube stiffens the thread, so wipe it clean and keep it dry. This is one of the numbered parts of the Hobby Heaven Zephyr range, which keeps growing; once a number is given, it always means the same part.

Notes · Q & A

Which parts fit the Zephyr, and will they fit another airbrush?

Needles, nozzles, caps and body parts are made for the Hobby Heaven Zephyr (HHA-1001), and that is the only airbrush we confirm them on. The 7 ml cup and the nozzle wrench may suit other airbrushes, but that is untested. Quick disconnects, hoses, the moisture trap and the thread adapters are universal accessories built around the standard 1/8" BSP airbrush thread, and the cleaning brushes, needles and reamer are general tools. The Compatible with row on each page says which group a part belongs to.

How do I find the right part number?

Every part has its own HHA number, printed on its box. HHA-20xx are matched needle, nozzle and cap sets, 21xx nozzles, 22xx needles, 23xx nozzle caps and 24xx needle caps; a last digit of 1 means 0.3 mm and 2 means 0.5 mm. HHA-3xxx are body parts, 4xxx cups, 5xxx air connections and 7xxx tools and cleaning. The system keeps growing: new parts join under the same numbering, and existing numbers never change meaning.

Can the Zephyr spray at 0.5 mm?

Yes. It comes set up at 0.3 mm, and the HHA-2002 set converts it: a 0.5 mm needle, a 0.5 mm nozzle with its O-ring, a nozzle cap and a needle cap. Those four parts change together, because needle, nozzle and caps must all be the same size. The body parts (HHA-3xxx) are the same for both setups.

How does the Zephyr connect to my compressor?

The air inlet is a 1/8" BSP male thread. Our braided hoses have a 1/8" BSP female nut at both ends, and the quick disconnects take the standard 5 mm hobby plug. Many compressors have a 1/4" BSP outlet and need an adapter; US compressors may have 1/4" NPT, which does not mate with BSP and needs an NPT-to-BSP adapter. Spray at 15–40 PSI and never above 40.

What are the seals made of, and how should I clean the parts?

Every seal in the Zephyr is a rubber O-ring. Flush with airbrush cleaner between colours and strip-clean after a session, but keep the assembled air valve (HHA-3401) out of solvent baths, as its pin, piston, spring and O-ring come as one unit. For a blocked nozzle, soak it out of the airbrush first; the reamer (HHA-7301) is the last resort, turned and never pushed.

Notes · Logistics

Shipping

Orders placed before 3pm (Mon–Fri) are dispatched the same day. UK delivery is by Royal Mail 24 Tracked. Free UK delivery on orders over £70. International delivery available via Royal Mail International Tracked or courier.

Returns

If you're not happy with your purchase, contact us within 30 days for a full refund or exchange. Items must be unused and in original packaging.

Table · Specification

Technical specifications

Product details
Brand
Hobby Heaven
Product code
HHA-3203
Type
Accessories
Shipping weight
100 g
Barcode
5061001183340
Materials & finish
Format
Spring case
Usage & compatibility
Compatible with
Hobby Heaven Zephyr
Other parts
Also in this range
Zephyr airbrush system

Product

Hobby Heaven Zephyr Spring Case (HHA-3203) – Replacement Airbrush Spare

Code (proj)

HHA-3203

Ship. weight

100 g

Brand

Hobby Heaven

Hobby Heaven · By hobbyists, for hobbyists

Sheet 2 / 4

End of sheet

Complete The Job