HHA-2202 0.5mm airbrush needle with its Hobby Heaven Airbrush Needles & Accessories box

Hobby Heaven Zephyr 0.5mm Needle (HHA-2202) – Replacement Airbrush Needle

$4.44
Sale price  $4.44 Regular price 
Skip to product information
HHA-2202 0.5mm airbrush needle with its Hobby Heaven Airbrush Needles & Accessories box

Hobby Heaven Zephyr 0.5mm Needle (HHA-2202) – Replacement Airbrush Needle

$4.44
Sale price  $4.44 Regular price 
Shipping calculated at checkout.

In stock · same-day dispatch before 3pm

  • Store rating 4.9/5 · 2225 reviews
  • UK tracked delivery
  • Spare Part
  • Zephyr
  • Needle

DWG · Product Information

PROJ: HHA-2202 · SHEET 2 / 4

View · Overview

Product overview

Run a Zephyr at 0.5 mm with the HHA-2002 set and it needs a 0.5 mm needle; HHA-2202 is that needle on its own. Its tapered point closes the 0.5 mm nozzle; as you pull the trigger back the needle withdraws and paint flows, and as you let go it shuts off again. The spare needle packed with every Zephyr is 0.3 mm, so a converted airbrush has no back-up of this size until you add one. When the point bends and the nozzle has survived, this is the only part to buy.

  • 0.5 mm needle for the Zephyr’s 0.5 mm nozzle (HHA-2102, or the nozzle from the HHA-2002 set)
  • Will not suit the 0.3 mm nozzle a Zephyr ships with
  • Kept straight in transit by a clear tube printed 0.5, in a box lined with foam
  • Inserted at the nose end once the nozzle is off

Is it really the needle?

Symptom Probable cause Fix
Hooked or kinked point, nozzle opening undamaged The needle HHA-2202
Shaft wobbles when rolled on the bench Bent needle HHA-2202
Cracked nozzle tip, paint seeping forward at rest Nozzle 0.5 mm nozzle HHA-2102
Fresh needle in, spray still uneven Nozzle hurt too 0.5 mm set HHA-2002
Spatter after the airbrush stood with paint in it Dried paint on the needle Clean before replacing

Signs it needs replacing

Clean the needle first, since crusted paint mimics damage. Then sight along it: any curve in the shaft, or a point that bends off line or feels rough against a fingernail, means it can no longer close the nozzle evenly.

Fitting

  • Air disconnected, airbrush clean.
  • Caps off, nozzle unscrewed with the wrench, needle chucking nut loosened; draw the old needle out through the front.
  • Feed the new one in from the front, put the nozzle and caps back, and bring the needle forward with a light touch until it meets the nozzle, never forced.
  • Tighten the chucking nut and run water or cleaner through before any paint.

Care

Keep the tube: it is the right place for the next spare. Rest the airbrush on a holder whenever you set it down, since a needle left loose on the bench is the one that gets knocked.

Worth knowing

  • On a Zephyr still on its original 0.3 mm parts, HHA-2201 is the needle to order; this one only works alongside the 0.5 mm nozzle and caps.
  • Built for the Zephyr alone: we make no claim that it fits any other airbrush.
  • One of the numbered parts of our Zephyr system, which keeps growing; reorder by the HHA code on the pack.

Notes · Q & A

Which parts fit the Zephyr, and will they fit another airbrush?

Needles, nozzles, caps and body parts are made for the Hobby Heaven Zephyr (HHA-1001), and that is the only airbrush we confirm them on. The 7 ml cup and the nozzle wrench may suit other airbrushes, but that is untested. Quick disconnects, hoses, the moisture trap and the thread adapters are universal accessories built around the standard 1/8" BSP airbrush thread, and the cleaning brushes, needles and reamer are general tools. The Compatible with row on each page says which group a part belongs to.

How do I find the right part number?

Every part has its own HHA number, printed on its box. HHA-20xx are matched needle, nozzle and cap sets, 21xx nozzles, 22xx needles, 23xx nozzle caps and 24xx needle caps; a last digit of 1 means 0.3 mm and 2 means 0.5 mm. HHA-3xxx are body parts, 4xxx cups, 5xxx air connections and 7xxx tools and cleaning. The system keeps growing: new parts join under the same numbering, and existing numbers never change meaning.

Can the Zephyr spray at 0.5 mm?

Yes. It comes set up at 0.3 mm, and the HHA-2002 set converts it: a 0.5 mm needle, a 0.5 mm nozzle with its O-ring, a nozzle cap and a needle cap. Those four parts change together, because needle, nozzle and caps must all be the same size. The body parts (HHA-3xxx) are the same for both setups.

How does the Zephyr connect to my compressor?

The air inlet is a 1/8" BSP male thread. Our braided hoses have a 1/8" BSP female nut at both ends, and the quick disconnects take the standard 5 mm hobby plug. Many compressors have a 1/4" BSP outlet and need an adapter; US compressors may have 1/4" NPT, which does not mate with BSP and needs an NPT-to-BSP adapter. Spray at 15–40 PSI and never above 40.

What are the seals made of, and how should I clean the parts?

Every seal in the Zephyr is a rubber O-ring. Flush with airbrush cleaner between colours and strip-clean after a session, but keep the assembled air valve (HHA-3401) out of solvent baths, as its pin, piston, spring and O-ring come as one unit. For a blocked nozzle, soak it out of the airbrush first; the reamer (HHA-7301) is the last resort, turned and never pushed.

Notes · Logistics

Shipping

Orders placed before 3pm (Mon–Fri) are dispatched the same day. UK delivery is by Royal Mail 24 Tracked. Free UK delivery on orders over £70. International delivery available via Royal Mail International Tracked or courier.

Returns

If you're not happy with your purchase, contact us within 30 days for a full refund or exchange. Items must be unused and in original packaging.

Table · Specification

Technical specifications

Product details
Brand
Hobby Heaven
Product code
HHA-2202
Type
Accessories
Shipping weight
100 g
Barcode
5061001183265
Made in
China
Materials & finish
Format
0.5 mm needle
Usage & compatibility
Needle size
0.5 mm
Compatible with
Hobby Heaven Zephyr
Other parts
Also in this range
Zephyr airbrush system

Product

Hobby Heaven Zephyr 0.5mm Needle (HHA-2202) – Replacement Airbrush Needle

Code (proj)

HHA-2202

Ship. weight

100 g

Brand

Hobby Heaven

Hobby Heaven · By hobbyists, for hobbyists

Sheet 2 / 4

End of sheet

Complete The Job