Hobby Heaven Zephyr 0.3mm Nozzle Cap (HHA-2301) – Replacement Airbrush Spare
In stock · same-day dispatch before 3pm
- Store rating 4.9/5 · 2225 reviews
- UK tracked delivery
- Spare Part
- Zephyr
- Nozzle Cap
DWG · Product Information
PROJ: HHA-2301 · SHEET 2 / 4
View · Overview
Product overview
Every Zephyr spray pattern is shaped at the nozzle cap: the polished piece with the knurled ring at the front end that covers the nozzle. Its opening is cut for one nozzle size, and HHA-2301 is the 0.3 mm version, the size a Zephyr wears straight from the box. It usually takes the hit when an airbrush is dropped, and it is easy to lose during cleaning. When nozzle and needle have survived, replacing the cap on its own puts things right.
- Opening sized for nozzle HHA-2101 (0.3 mm)
- Also part of set HHA-2001
- Ridged ring around the rim for grip; no tool required
- Packed in a foam-filled clear tube with a white screw lid and the size printed on the side
- Needle cap HHA-2401 threads onto its front
How it works
Air rushing past the end of the nozzle is guided by this cap, and the even ring of air it forms is what breaks the paint into a fine, centred spray. Bend its rim, cross its thread or seat it crooked, and the air leaves unevenly, dragging the pattern off to one side.
Is it really the nozzle cap?
| Problem | Replacement |
|---|---|
| Rim knocked out of shape, thread damaged or cap missing; other parts intact | This cap, HHA-2301 |
| Crack or chip at the very end of the nozzle | Nozzle HHA-2101 (0.3 mm) |
| Needle point kinked | Needle HHA-2201 (0.3 mm) |
| Front end hurt in several places by one fall | Set HHA-2001 |
The impact that bends a cap can travel through to the nozzle, so check that too before buying.
Telling wear from dirt
Real wear shows as a nick or flattened patch at the front rim, a thread that drags, a cap that will not sit square once tightened, or a spray that leans while needle and nozzle check out. Paint dried inside the cap mimics every one of these, and far more often, so give it a long soak in airbrush cleaner and scrub it out with a soft brush before anything else; the HHA-7201 brushes suit this job. Replace the cap only if the fault persists.
Fitting
Air off and disconnected first. The nozzle must already be seated, snug by hand and then given just a touch more with the wrench, before you fit the cap. Start it straight with your fingertips; if it binds, unscrew and try again, because forcing a crossed thread spoils the airbrush’s own thread. Finger pressure is all the cap needs.
Worth knowing
Fitting this cap alone will not take a Zephyr to 0.5 mm. Spray size comes from a matched trio of needle, nozzle and nozzle cap, so a size change means the HHA-2002 set. The two sizes look alike, so keep a spare in its labelled tube. We have confirmed its fit on the Hobby Heaven Zephyr only; like every Zephyr part it has an HHA number, and the system keeps adding new ones.
Notes · Q & A
Which parts fit the Zephyr, and will they fit another airbrush?
Needles, nozzles, caps and body parts are made for the Hobby Heaven Zephyr (HHA-1001), and that is the only airbrush we confirm them on. The 7 ml cup and the nozzle wrench may suit other airbrushes, but that is untested. Quick disconnects, hoses, the moisture trap and the thread adapters are universal accessories built around the standard 1/8" BSP airbrush thread, and the cleaning brushes, needles and reamer are general tools. The Compatible with row on each page says which group a part belongs to.
How do I find the right part number?
Every part has its own HHA number, printed on its box. HHA-20xx are matched needle, nozzle and cap sets, 21xx nozzles, 22xx needles, 23xx nozzle caps and 24xx needle caps; a last digit of 1 means 0.3 mm and 2 means 0.5 mm. HHA-3xxx are body parts, 4xxx cups, 5xxx air connections and 7xxx tools and cleaning. The system keeps growing: new parts join under the same numbering, and existing numbers never change meaning.
Can the Zephyr spray at 0.5 mm?
Yes. It comes set up at 0.3 mm, and the HHA-2002 set converts it: a 0.5 mm needle, a 0.5 mm nozzle with its O-ring, a nozzle cap and a needle cap. Those four parts change together, because needle, nozzle and caps must all be the same size. The body parts (HHA-3xxx) are the same for both setups.
How does the Zephyr connect to my compressor?
The air inlet is a 1/8" BSP male thread. Our braided hoses have a 1/8" BSP female nut at both ends, and the quick disconnects take the standard 5 mm hobby plug. Many compressors have a 1/4" BSP outlet and need an adapter; US compressors may have 1/4" NPT, which does not mate with BSP and needs an NPT-to-BSP adapter. Spray at 15–40 PSI and never above 40.
What are the seals made of, and how should I clean the parts?
Every seal in the Zephyr is a rubber O-ring. Flush with airbrush cleaner between colours and strip-clean after a session, but keep the assembled air valve (HHA-3401) out of solvent baths, as its pin, piston, spring and O-ring come as one unit. For a blocked nozzle, soak it out of the airbrush first; the reamer (HHA-7301) is the last resort, turned and never pushed.
Notes · Logistics
Shipping
Returns
Table · Specification
Technical specifications
Product
Hobby Heaven Zephyr 0.3mm Nozzle Cap (HHA-2301) – Replacement Airbrush Spare
Code (proj)
HHA-2301
Ship. weight
100 g
Brand
Hobby Heaven
Hobby Heaven · By hobbyists, for hobbyists
Sheet 2 / 4
End of sheet