Aves Apoxie Clay 454g (1lb) Native — Two-Part Epoxy Clay
$29.49
Sale price
$29.49
Regular price
Skip to product information
Aves Apoxie Clay 454g (1lb) Native — Two-Part Epoxy Clay
$29.49
Sale price
$29.49
Regular price
Shipping calculated at checkout.
In stock · same-day dispatch before 3pm
- Store rating 4.9/5 · 2142 reviews
- UK tracked delivery
DWG · Product Information
PROJ: AC1N · SHEET 2 / 4
View · Overview
Product overview
Native in the 1 lb working pack gives figure sculptors enough Apoxie Clay for sustained use without moving into the bulk format. The tan-brown body is useful when judging planes, folds and facial forms because a mid-tone reveals light and shadow without the glare of white. Its fine grain is suited to close sculpted detail and impressions. Work remains open for 1–3 hours; the clay then self-hardens without baking and reaches full cure in 24 hours. If you have not used it before, start with the ¼ lb Native pack.
- Aves instructs users to knead for two minutes to a uniform colour, followed by a five-minute pause for better handling.
- For fine feathering, Aves recommends Finishing Solution specifically for Apoxie Clay, while water is reserved for broad smoothing.
- Use disposable gloves and a different retrieval tool for each unmixed part.
- Its minimal self-levelling helps small impressions remain defined while the material is workable.
Notes · Q & A
What's the difference between Green Stuff and Milliput-type putties?
Green Stuff is flexible and springy, holding fine sculpted detail like cloth and cabling. Milliput-type putties are harder-setting and sand smooth once cured, which makes them better for gap-filling and surfaces you want to blend flat. Many sculptors mix the two.
How do I stop epoxy putty sticking to my tools and fingers?
Keep a little water on the tool and your fingertips as a release; the putty won't grab a wet surface. Work in good light and let very tacky putty firm up for a few minutes before shaping fine detail.
How do I get the mixing ratio right?
Most epoxy putties cure at a 1:1 mix of the two parts by volume, kneaded until the colour is fully even with no streaks. Under-mixing leaves soft patches that never fully harden, so mix longer than feels necessary.
How do I fill a seam gap cleanly without losing nearby detail?
Press a small amount of putty into the gap, then wipe the excess back with a wet tool or a cotton bud before it cures, leaving putty only in the recess. Cleaning up wet saves sanding over detail later.
Notes · Logistics
Shipping
Orders placed before 3pm (Mon–Fri) are dispatched the same day. UK delivery is by Royal Mail 24 Tracked. Free UK delivery on orders over £70. International delivery available via Royal Mail International Tracked or courier.
Returns
If you're not happy with your purchase, contact us within 30 days for a full refund or exchange. Items must be unused and in original packaging.
Table · Specification
Technical specifications
Product details
Brand
Aves Studio
Product code
AC1N
Type
Epoxy Putty
Shipping weight
590 g
Colour
Native
Composition & curing
Chemistry
Two-part epoxy clay (Part A + Part B, mixed 50/50)
Hardness
Hard
Working time
180 min
Full cure
24 h
Heat resistance
149 °C
Dimensions & contents
Net weight
454 g
Usage & compatibility
Bonds
Epoxy, Porcelain, Ceramic, Metal, Vinyl, Polymer, Hard plastic, Foam, Fibreglass, Wood
Safety & compliance
Signal word
Warning
Hazards
H317 May cause an allergic skin reaction, H320 Causes eye irritation
Product
Aves Apoxie Clay 454g (1lb) Native — Two-Part Epoxy Clay
Code (proj)
AC1N
Ship. weight
590 g
Brand
Aves Studio
Hobby Heaven · By hobbyists, for hobbyists
Sheet 2 / 4
End of sheet
Complete The Job
Brand
More from Aves Studio