Tamiya 87161 sanding sponge sheet with its printed header card, the grey foam sheet on white

Tamiya Sanding Sponge Sheet 180 87161

£4.99
£4.99
Skip to product information
Tamiya 87161 sanding sponge sheet with its printed header card, the grey foam sheet on white
  • Tamiya 87161 sanding sponge sheet with its printed header card, the grey foam sheet on white
  • The 87161 sanding sponge sheet at an angle on white, the 5 mm foam edge visible beneath the grey abrasive face
  • The 87161 sheet from a second angle on white, the open-cell foam edge catching the light
  • A cut strip of Tamiya sanding sponge wrapped round a cylindrical plastic part, held between finger and thumb
  • A folded strip of the sanding sponge pressed against the rim of a model wheel and worked in both hands
  • A strip of Tamiya sanding sponge smoothing the pleated coat of a grey plastic figure
Tamiya Sanding Sponge Sheet 180 87161
Tamiya

Tamiya Sanding Sponge Sheet 180 87161

£4.99
£4.99
Taxes included. Shipping calculated at checkout.

In stock · same-day dispatch before 3pm

  • Store rating 4.9/5 · 2179 reviews
  • UK tracked delivery

DWG · Product Information

PROJ: 87161 · SHEET 2 / 4

View · Overview

Product overview

At 180 grit, 87161 provides the strongest cut in Tamiya’s nine-grit sanding sponge range. It suits the stage when a pronounced joint, raised edge or uneven surface needs material removed before subtler abrasion becomes relevant. The 5 mm polyethylene foam backing spreads finger pressure over heavily curved forms, helping the abrasive meet changing contours without requiring a rigid block. Use the full sheet for broad areas or divide it into task-sized pieces with a modeller’s knife.

  • The aluminium oxide abrasive can be used on plastic, wood and metal, either wet or dry.
  • One 114 × 140 mm sheet per pack, easily cut to a smaller working size.
  • Red printing on the reverse identifies the product and its 180 grit.

Notes · Q & A

What's the difference between a needle file and a sanding stick?

Needle files are steel, cut faster and hold their shape for tight spots and metal. Sanding sticks are foam or paper-backed abrasive, kinder to plastic and better for smoothing broad, flat surfaces without gouging.

Which grit should I start with on mould lines?

For plastic, start around 400 grit to knock the line back, then refine with 600–800. Coarser than 400 leaves scratches you then have to chase out, so only go lower for resin flash or heavy work.

Should I file wet or dry?

Wet sanding with a drop of water reduces dust and clogging and gives a finer finish, which matters on resin where the dust is best not inhaled. Dry filing is fine for quick metal work and steel needle files.

How do I stop a file clogging with plastic or resin?

Brush it out with a stiff brass brush along the cut direction. For sanding sticks, tap them clean often. Clogged abrasive stops cutting and starts burnishing, which just polishes the high spots rather than removing them.

Notes · Logistics

Shipping

Orders placed before 3pm (Mon–Fri) are dispatched the same day. UK delivery is by Royal Mail 24 Tracked. Free UK delivery on orders over £70. International delivery available via Royal Mail International Tracked or courier.

Returns

If you're not happy with your purchase, contact us within 30 days for a full refund or exchange. Items must be unused and in original packaging.

Table · Specification

Technical specifications

Product details
Brand
Tamiya
Product code
87161
Type
Accessories
Tool type
Sanding sponge sheet
Shipping weight
80 g
Barcode
4950344871612
Made in
Japan
Dimensions & contents
Tool thickness
5 mm
Sheet size
114 x 140 mm
Pieces
1 sheet
Materials & finish
Grit
180
Material
Aluminium oxide on high-density polyethylene foam
Usage & compatibility
Capacity
Plastic, wood and metal, wet or dry

Product

Tamiya Sanding Sponge Sheet 180 87161

Code (proj)

87161

Ship. weight

80 g

Brand

Tamiya

Hobby Heaven · By hobbyists, for hobbyists

Sheet 2 / 4

End of sheet

Complete The Job
Brand More from Tamiya