💜 Green Stuff World UV Putty

Single-Component UV-Cure Modeling Filler & Surface Smoother

50ml • No Mixing Required • Cures in 15 Seconds Under UV Light

⚡ Work Fast, Cure Instantly

UV Putty revolutionizes the gap-filling process with instant UV-light curing technology. This single-component formula requires no mixing, stays workable indefinitely until exposed to UV light, then hardens completely in just 15 seconds. Apply thin layers with precision, cure each layer instantly, and move directly to sanding and painting—all in a fraction of the time traditional putties require. The semi-transparent finish shows you exactly where you've applied material, eliminating guesswork during finishing work.

📋 Technical Specifications

Type	Single-component UV-curing acrylic putty
Volume	50ml in UV-protective aluminum jar
Mixing Required	None—ready to use straight from jar
Working Time	Unlimited (until exposed to UV light)
Cure Time	15-30 seconds under UV lamp (1cm distance)
Cure Depth	Up to 2mm per UV exposure
Finish	Semi-translucent, smooth, sandable
Material Compatibility	Plastic, resin, metal, wood, primed surfaces
Application Methods	Brush, spatula, sculpting tool, toothpick
Storage Temperature	7-25°C in sealed, dark container
Shelf Life	Approximately 12 months unopened
UV Lamp Required	Yes (365-405nm wavelength recommended)

⭐ Game-Changing Advantages

⚡ Instant Curing
15 seconds under UV light vs 30-60 minutes for traditional putties

🎯 Complete Control
Work at your own pace—putty stays soft until you cure it

🔄 Layer by Layer
Cure thin layers instantly, build up complex shapes gradually

👀 Visual Clarity
Semi-transparent finish shows exactly where you've filled

🛠️ No Mixing
Single component means no waste, no measuring, no guessing

♻️ Zero Waste
Use only what you need—the rest stays fresh in the jar

🎯 Practical Applications

🔧 Seam & Gap Filling

Perfect for closing visible joints on assembled models:

Miniature assembly seams
Vehicle kit panel gaps
Multi-part weapon connections
Base and scenic piece joins

Apply, shape, cure in seconds—perfect seam removal in under a minute.

🎨 Surface Correction

Fix casting defects and prepare smooth surfaces:

Fill mold lines and air bubbles
Smooth rough resin surfaces
Repair chipped paint or damaged details
Level uneven base surfaces

Semi-transparent finish lets you see high spots before sanding.

✏️ Detail Building

Add small sculptural elements layer by layer:

Build up armor plates gradually
Create raised panel lines
Add small rivets or bolts
Sculpt minor clothing folds

Cure each layer instantly, then add more—complete control over shape.

🔨 Conversions & Modifications

Quickly modify miniatures and models:

Fill unwanted detail (remove logos, symbols)
Adjust poses by filling/rebuilding joints
Create custom weapon modifications
Blend kitbashed parts seamlessly

Test fit, adjust, cure—iterate rapidly on conversion ideas.

🏗️ Terrain & Diorama Work

Speed up scenic construction:

Fill gaps between foam sections
Smooth plaster casting imperfections
Create small water effects (transparent look)
Repair broken scenic pieces instantly

No waiting for layers to dry—finish terrain projects same day.

⚙️ Scale Model Assembly

Ideal for plastic and resin kits:

Aircraft canopy frame filling
Automotive body panel seams
Ship hull plate gaps
Armor kit part joins

Sand and prime the same session—no overnight waiting.

📖 How to Use UV Putty

Step-by-Step Process

⚠️ What You'll Need

UV lamp (365-405nm wavelength)—Green Stuff World UV lamps are specifically designed for this product. LED nail-curing lamps also work. Standard daylight or incandescent bulbs will NOT cure UV putty.

1. Prepare the Surface

Clean the area with isopropyl alcohol to remove oils, dust, and mold release agents. Ensure the surface is completely dry. UV putty works best on clean, grease-free surfaces.

2. Apply UV Putty

Use a small spatula, old brush, toothpick, or sculpting tool to scoop out a small amount. Apply directly to gaps, seams, or defects. Work the putty into recesses and undercuts. The semi-transparent nature helps you see where you're applying material. Take your time—the putty won't harden until you expose it to UV light.

3. Shape & Smooth (Optional)

Use tools dipped in isopropyl alcohol to shape and smooth the putty before curing. You have unlimited time to perfect the shape. For very smooth finishes, use a silicone-tipped tool or damp brush to blend edges seamlessly with the surrounding surface.

4. UV Cure

Hold your UV lamp approximately 1cm (about 0.5 inches) from the putty surface. Expose for 15-30 seconds. Thin layers (under 1mm) cure in 15 seconds; thicker applications (up to 2mm) need 30 seconds. The putty will transition from semi-soft to completely hard.

5. Add More Layers if Needed

For deep gaps or complex shapes, apply UV putty in thin layers. Cure each layer fully before adding the next. This prevents incomplete curing of buried material and gives you precise control over the final shape. Build up gradually rather than filling deep gaps in one application.

6. Sand & Finish

Once cured, the putty can be sanded immediately with any grit sandpaper. Start with 400-600 grit for shaping, then move to 800-1000 grit for final smoothing. The material sands cleanly without gumming up paper. You can also drill, carve, or cut cured UV putty with standard modeling tools.

7. Prime & Paint

After sanding, wipe away dust and apply your standard primer. UV putty accepts all paint types—acrylics, enamels, lacquers—without any special preparation. The semi-transparent nature disappears completely under primer and paint.

💡 Pro Tip: Keep your UV lamp off to the side while working, then bring it over when ready to cure. This prevents accidental exposure that could harden putty on your tools. Clean tools immediately with isopropyl alcohol if putty accidentally cures on them.

💡 UV Lamp Requirements

Choosing the Right UV Light Source

Light Source	Effectiveness	Notes
Green Stuff World UV Lamp	⭐⭐⭐⭐⭐	Specifically designed for hobby use, optimal wavelength
LED Nail Curing Lamp	⭐⭐⭐⭐	Works well, widely available, affordable
UV Flashlight (365-405nm)	⭐⭐⭐	Portable, good for spot curing, may take longer
Sunlight	⭐⭐	Free but slow, unpredictable, not recommended for precision work
Regular LED/Incandescent Bulbs	❌	Will NOT cure UV putty—insufficient UV output

⚠️ Important: UV putty requires specific UV wavelengths (365-405nm) to cure properly. Standard workshop lighting will not cure this product. For best results, invest in a dedicated UV lamp designed for resin curing or nail gel curing.

❓ Frequently Asked Questions

Will this cure under regular room lighting?

No. UV putty requires UV light specifically in the 365-405nm wavelength range. Regular LED bulbs, incandescent bulbs, and fluorescent tubes do not emit sufficient UV radiation to cure this product. You need a UV lamp, UV flashlight, or strong direct sunlight.

How thick can I apply UV putty in one layer?

For reliable full curing, keep individual layers under 2mm thick. UV light penetrates this depth effectively in 30 seconds. Thicker applications may cure on the surface but remain soft underneath. For deep gaps, build up multiple thin layers, curing each one fully.

What if the putty accidentally hardens in the jar?

The aluminum jar blocks UV light, so this shouldn't happen if you keep the lid closed. If the jar is exposed to strong UV light for extended periods, the surface layer may begin to cure. Always close the jar immediately after use and store away from direct sunlight and UV sources.

Can I use this on all miniature materials?

Yes. UV putty adheres to plastic (styrene, ABS), resin (both polyurethane and epoxy), metal (white metal, pewter, aluminum), wood, and primed surfaces. For best adhesion, ensure surfaces are clean and free of oils or release agents.

Why is the putty semi-transparent?

The translucent nature serves two purposes: (1) It allows you to see exactly where you've applied material, making it easier to identify high spots before sanding. (2) UV light can penetrate deeper for more effective curing. After priming, the transparency is completely hidden.

How long does an opened jar last?

When stored properly (sealed, away from UV light, 7-25°C), an opened jar maintains full effectiveness for approximately 12 months. If the putty thickens over time, you can thin it slightly with a drop or two of isopropyl alcohol and mix thoroughly.

Can I mix pigments or paint into UV putty?

You can add small amounts of pigment, but this may reduce UV light penetration and increase cure time. Dark colors especially can block UV light. For most applications, it's better to use the putty as-is and paint over it after curing. The semi-transparent finish disappears under primer anyway.

How does this compare to regular Green Putty?

Regular Green Putty (acrylic) dries by air/water evaporation in 30-60 minutes and works well for general gap filling. UV Putty cures instantly under UV light, giving you unlimited working time until you're ready to cure. UV is faster for precision work with immediate results; regular is better for when you don't have a UV lamp.

💡 Advanced Techniques & Workshop Tips

🔹 Spot Curing for Complex Shapes

When filling complex curved surfaces, apply putty to the entire area but cure in sections. Hold your UV lamp at an angle to cure one side, then rotate and cure the other side. This prevents shadow areas where UV light can't reach from remaining soft.

🔹 Creating Perfectly Smooth Seams

Apply a small bead of UV putty along the seam. Use a tool dipped in isopropyl alcohol to spread it smoothly across the joint, feathering the edges outward. Before curing, wipe excess with an alcohol-dampened cloth for ultra-smooth results. Then cure and lightly sand if needed.

🔹 Using as a "Test Coat"

The semi-transparent nature makes UV putty perfect for checking smoothness before priming. Apply a thin layer over an area, cure it, and inspect under bright light. Any remaining imperfections show as shadows or texture variations. Sand smooth, repeat if needed.

🔹 Building Custom Details

Use UV putty to sculpt small additions like rivets, battle damage, or weathering effects. Apply a tiny dot, shape it with a dental pick, cure immediately, then add the next one. This technique is much faster than waiting for traditional putty to dry between applications.

🔹 Tool Cleaning

Clean tools immediately with isopropyl alcohol before UV exposure hardens the putty. Keep a small container of alcohol and paper towels at your workspace. If putty accidentally cures on a tool, you can scrape it off or dissolve with acetone (test on tool material first).

🔹 Combining with Other Putties

UV Putty pairs excellently with traditional putties and epoxies. Use epoxy putty for bulk filling or major sculpting, then apply a thin UV putty layer as a final smoothing coat. Sand the UV layer for a glass-smooth finish—much easier than sanding epoxy alone. The instant cure means no waiting between steps.

⚖️ Gap Filler Comparison

Property	UV Putty	Acrylic Putty (Green Putty)	Epoxy Putty (Green Stuff)
Cure Method	UV light ✅	Air dry	Chemical reaction
Working Time	Unlimited ✅	5-10 minutes	1-3 hours
Cure Time	15 seconds ✅	30-60 minutes	4-8 hours
Components	Single ✅	Single	Two-part mix
Layering Capability	Instant layers ✅	Wait between layers	Single application
Sandability	Excellent ✅	Excellent	Difficult
Visual Clarity	Semi-transparent ✅	Green opaque	Green opaque
Special Equipment	UV lamp required	None ✅	None ✅
Best For	Precision work, speed ✅	General gap filling	Large sculpting

📦 Storage & Safety Guidelines

Always keep jar tightly sealed when not in use to prevent contamination and moisture absorption
Store away from UV light sources including direct sunlight, UV lamps, and resin printers
Temperature range: 7-25°C (45-77°F) for optimal shelf life and consistency
Shelf life: Approximately 12 months when stored properly in sealed container
Keep out of reach of children—not for consumption
Use in well-ventilated area though UV putty produces minimal fumes
Clean spills immediately with isopropyl alcohol before accidental UV exposure causes hardening
Aluminum jar protection: The specialized packaging blocks UV light—transfer to other containers may reduce shelf life

📦 Package Contents

1× Green Stuff World UV Putty (50ml in aluminum jar)

UV-protective packaging • Single-component formula • Ready to use immediately

⚠️ UV lamp required for curing (sold separately)

✅ The Bottom Line

UV Putty transforms how you work with miniatures and models. The instant curing eliminates waiting, while unlimited working time means you can take as long as you need to get every detail perfect. Whether you're prepping miniatures for tabletop gaming, finishing scale models for display, or creating custom conversions, UV Putty delivers professional results in a fraction of the time. Once you experience the freedom of on-demand curing, you'll wonder how you ever worked without it.

50ml goes a long way—perfect size for serious hobbyists who value speed and precision.

Item		Price	Qty	Total
		Subtotal	$0.00
		Shipping
		Total

Essentials Bestsellers - Items tagged as "Accessories"

Our brands

Net Orders Checkout

Shipping Address

Shipping Methods