AK Interactive Replacement Needle 0.3mm AK9601
AK Interactive Replacement Needle 0.3mm AK9601
- Same-day dispatch before 3pm
- Store rating 4.9/5 · 2126 reviews
- UK tracked delivery
- Spare Part
- Needle
Product Information
A 0.2 mm needle and nozzle set that converts your AK9600 Top Line Airbrush from the standard 0.3 mm setup to an ultra-fine detail tool. The needle is precision-ground stainless steel, the nozzle is machined brass with a self-centering design.
The tagline on the packaging says it all: "Turn your 0.3 airbrush into 0.2 with this kit." Same airbrush body, significantly finer output — hairline spray patterns that the 0.3 mm nozzle can't achieve.
Both parts come individually protected: the needle in a clear protective tube with red end caps and a "0.2" label, and the nozzle in a separate screw-cap vial. Ready for immediate installation.
🎯 Laser-Thin Lines — Preshade panel lines, spray highlights onto 28 mm faces, lay down freehand designs impossible with 0.3 mm.
🔄 Quick Swap — Unscrew the 0.3 mm parts, install 0.2 mm, done in minutes. Swap back just as easily for broader coverage.
⚙️ Self-Centering Nozzle — The brass nozzle seats itself in perfect alignment automatically. No calibration after reassembly.
🔩 Quality Materials — Stainless steel needle resists bending and corrosion. Brass nozzle handles cleaning solvents without degradation.
💰 Fraction of a Second Airbrush — Adding 0.2 mm capability to your existing AK9600 costs far less than buying a dedicated fine-detail airbrush.
| 0.3 mm (standard) | 0.2 mm (this set) | |
| Best for | Priming, base coating, broad coverage | Fine lines, detail work, precision |
| Paint consistency | Standard thin to medium | Milk-thin only |
| Typical PSI | 15–25 PSI | 10–18 PSI |
| Use case | Your everyday workhorse | Your precision scalpel |
| Brand | AK Interactive |
| Product Name | Needle + Nozzle 0.2 Replacement for AK9600 |
| Reference / SKU | AK9600-02 |
| Nozzle Size | 0.2 mm |
| Contents | 1× stainless steel needle (in protective tube) + 1× brass self-centering nozzle (in screw-cap vial) |
| Compatible With | AK9600 Top Line Airbrush only |
| Condition | Brand New |
⚠ AK9600 Top Line Airbrush only. Will not fit Iwata, Harder & Steenbeck, Badger, or other brands.
⚠ Not for priming or heavy base coats. 0.2 mm is a detail tool. Thick paints will clog constantly. Keep your 0.3 mm for coverage.
⚠ Needle tip is fragile. Always handle with tweezers and store in the protective tube when not installed.
Sprue cutters or a hobby knife — what do I actually need?
Cutters remove parts from the sprue cleanly; the knife trims the leftover nub and mould lines. You'll want both — they do different jobs.
What's the difference between single-blade and double-blade cutters?
Single-blade cutters shear against a flat anvil for an ultra-clean cut with less stress on the plastic; double-blade cutters are tougher for general work.
How do I keep tools in good condition?
Cut plastic only (never metal sprues or wire) with precision cutters, replace knife blades often, and keep files clear with a brass brush.
Shipping
Returns