GSW Contact Cement – All Purpose Contact Glue 100 ml
GSW Contact Cement – All Purpose Contact Glue 100 ml
- Same-day dispatch before 3pm
- Store rating 4.9/5 · 2126 reviews
- UK tracked delivery
Product Information
⚡ Contact Cement – Instant Bond, No Clamping
Apply to both surfaces → wait until tacky → press together → done. Bonds instantly. Stays flexible. No second chances.
📦 What You Get
100ml of high-strength neoprene contact adhesive – the classic "apply to both sides, let dry, press together" cement. Creates an instant, permanent bond that stays flexible after curing. The go-to glue for cosplay armour, EVA foam builds, leather goods, and anywhere you need a strong but bendable joint without clamping for hours.
⚡ How It Works
⚠️ Bond is instant on contact – do a dry fit first!
✓ Works With
Best for flexible materials that need to bend without cracking the bond.
🎯 What's It Good For?
⚔️ Cosplay & Props
- EVA foam armour assembly
- Weapon handles and grips
- Layered foam builds
- Flexible joints that move
🐄 Leatherwork
- Belts, straps, sheaths
- Pouches and bags
- Repairs and patches
- Strong without stitching
🔧 DIY & Repairs
- Shoe sole reattachment
- Tool handle wraps
- Rubber gaskets and trim
- Fabric to hard surfaces
🎨 Craft & Models
- Mixed media assemblies
- Terrain with flexible elements
- Fabric flags and banners
- No-clamp quick bonds
📋 Specifications
| Volume | 100ml |
| Type | Neoprene contact adhesive |
| Application | Apply to both surfaces |
| Open time | 10-30 minutes (until tacky) |
| Bond time | Instant on contact |
| Flexibility | ✓ Yes – stays flexible |
| Repositionable | ✗ No – one shot only |
| Manufacturer | Green Stuff World (Spain) |
💡 Pro Tips
- Always dry fit first – mark alignment lines on EVA foam before gluing
- Thin coats only – thick layers take forever to dry and stay gummy
- Roll or press hard – use a seam roller for maximum bond strength
- Work in sections – on large pieces, glue in stages to maintain accuracy
- Heat helps – warming EVA foam slightly before pressing improves adhesion
✅ Pros
- Instant bond – no clamping needed
- Stays flexible after cure
- Works on multiple materials
- Very strong, wear-resistant
- Industry standard for cosplay
⚠️ Keep in Mind
- No repositioning – plan ahead
- Strong fumes – ventilate well
- Needs drying time before contact
- Messy if not careful
⚠️ Safety: Strong solvent fumes – use in well-ventilated area or outdoors. Flammable. Avoid skin contact. Keep away from heat/flames. Cap tightly after use. Keep away from children.
🏪 Hobby Heaven – Authorised Green Stuff World Dealer UK
Which glue should I use for plastic, resin or metal?
Plastic cement welds polystyrene kits; resin and metal don't react to cement, so use super glue (CA). PVA is for basing materials only.
Green Stuff or Milliput — which putty?
Green Stuff stays slightly flexible and holds fine sculpted detail; Milliput cures rock-hard and sands smooth, ideal for gap filling. Many modellers mix the two.
How long does epoxy putty take to cure?
Workable for roughly 60–90 minutes, fully cured in about 24 hours at room temperature — check each product's description for exact times.
Shipping
Returns