AK Interactive AK9602 replacement nozzle 0.3mm inside clear screw-cap storage vial with yellow 0.3 size label showing brass nozzle visible through the plastic

AK Interactive Replacement Nozzle 0.3mm AK9602

$12.07

AK Interactive Replacement Nozzle 0.3mm AK9602

AK Interactive

AK Interactive Replacement Nozzle 0.3mm AK9602

Name: AK Interactive Replacement Nozzle 0.3mm AK9602
Brand: AK Interactive
SKU: AK9602
Price: 12.07 AUD
Availability: InStock

$12.07

Taxes included. Shipping calculated at checkout.

In stock · same-day dispatch before 3pm

Store rating 4.9/5 · 2170 reviews
UK tracked delivery

Spare Part
Nozzle

DWG · Product Information

PROJ: AK9602 · SHEET 2 / 4

View · Overview

Product overview

AK Interactive — Airbrush Parts

Replacement Nozzle 0.3 mm

AK9602 · Self-Centering Brass · Factory Standard for AK9600 Top Line

What Is This?

A direct replacement 0.3 mm nozzle for the AK9600 Top Line Airbrush. Machined from brass with AK's self-centering design — the nozzle seats itself in perfect alignment with the needle every time you install it.

Supplied in a small screw-cap vial with a yellow "0.3" label for safe storage and identification. The close-up shows the stepped brass body with machined collar, precision orifice, and white PTFE sealing ring at the rear — all visible confirmation of the self-centering engineering.

The nozzle takes the most abuse in any airbrush: paint flows through it under pressure, cleaning solvents pass through it regularly, and the orifice gradually wears. When spray patterns deteriorate and cleaning doesn't fix it, a fresh nozzle is usually the answer.

When Do You Need a New Nozzle?

🔍 Persistent clogging — Dried paint permanently bonded inside the orifice that cleaning can't shift.

💨 Uneven spray pattern — A damaged or worn orifice produces lopsided, sputtering spray. If a new needle doesn't fix it, the nozzle is the culprit.

⏳ Gradual wear — Repeated cleaning and solvent exposure slowly enlarge the orifice. Spray becomes wider and less controlled.

🛡️ Preventive spare — Keep one in the drawer alongside a spare needle for instant mid-session recovery.

What Does "Self-Centering" Mean?

The nozzle and needle must be perfectly aligned for a straight, even spray. If the nozzle sits off-centre, paint sprays to one side.

AK's self-centering nozzle has a tapered seat that guides itself into perfect alignment as you tighten it. No calibration, no test-spraying, no micro-adjustments. The PTFE sealing ring (visible as the white ring on the rear) ensures a consistent, airtight seal every reassembly.

AK9600 Replacement Parts Guide

SKU	Part	What It Does
AK9601	Needle 0.3 mm	Like-for-like standard needle replacement
AK9602 ←	Nozzle 0.3 mm	Like-for-like standard nozzle replacement
AK9600-02	Needle + Nozzle 0.2 mm	Upgrade set for ultra-fine detail work

💡 When replacing a worn nozzle, consider replacing the needle (AK9601) at the same time. A new nozzle paired with a worn needle can still produce suboptimal results.

Specifications

Brand	AK Interactive
Product Name	Nozzle Replacement for AK9600 0.3 Top Line
Reference / SKU	AK9602
Nozzle Size	0.3 mm (factory standard)
Material	Brass (self-centering) with PTFE sealing ring
Packaging	Screw-cap storage vial with 0.3 size label
Compatible With	AK9600 Top Line Airbrush only
Condition	Brand New

Worth Knowing

⚠ AK9600 only. Will not fit other airbrush brands, even those with 0.3 mm setups.

⚠ Nozzle only — no needle. Needle sold separately as AK9601. For 0.2 mm upgrade (both parts), see AK9600-02.

⚠ Brass is soft. Hand-tight only. Over-tightening or using metal tools on the nozzle body can deform it. Never clean the orifice with metal brushes or wire.

Hobby Heaven — By Hobbyists. For Hobbyists.

Family-run hobby supplies from Derby, UK. Authorised AK Interactive dealer.

Notes · Q & A

Sprue cutters or a hobby knife — what do I actually need?

Cutters remove parts from the sprue cleanly; the knife trims the leftover nub and mould lines. You'll want both — they do different jobs.

What's the difference between single-blade and double-blade cutters?

Single-blade cutters shear against a flat anvil for an ultra-clean cut with less stress on the plastic; double-blade cutters are tougher for general work.

How do I keep tools in good condition?

Cut plastic only (never metal sprues or wire) with precision cutters, replace knife blades often, and keep files clear with a brass brush.

Notes · Logistics

Shipping

Orders placed before 3pm (Mon–Fri) are dispatched the same day. UK delivery is by Royal Mail 24 Tracked. Free UK delivery on orders over £70. International delivery available via Royal Mail International Tracked or courier.

Returns

If you're not happy with your purchase, contact us within 30 days for a full refund or exchange. Items must be unused and in original packaging.

Table · Specification