Aves Super White Apoxie 1 lb Part A and Part B tubs, one open, beside two white sculpted classical columns

Aves Super White Apoxie 454g (1lb) — Bright White Epoxy Modelling Compound

£25.79
£25.79
Skip to product information
Aves Super White Apoxie 1 lb Part A and Part B tubs, one open, beside two white sculpted classical columns
  • Aves Super White Apoxie 1 lb Part A and Part B tubs, one open, beside two white sculpted classical columns
  • Feature graphic with two stacked Apoxie tubs listing self-hardening, waterproof and zero-shrinkage properties
  • Three-step guide: measure equal parts from two jars, knead for two minutes to a uniform colour, then shape and smooth
  • Four uses in one graphic: sculpting a bust, converting a miniature, repairing a cracked vase and building terrain
  • Sculpted eagle in cured epoxy beside Apoxie Sculpt tubs, with an inset of a wing being sanded smooth
  • Apoxie Sculpt colour chart: twelve Part A colours as swatches beside a Part A jar and a Part B jar
  • Finished work: a runed bracer prop, a sculpted fairy being detailed with a tool, and a mossy ruin diorama
  • Service panel: UK stock shipped from Derby, same-day dispatch before 3pm, VAT included, direct from Aves USA
  • Size guide comparing the quarter-pound, one-pound and four-pound Apoxie Sculpt tubs, which are sold separately
  • Range graphic of Aves tubs and bottles: Apoxie Sculpt, Apoxie Clay, Apoxie Paste, FIXIT Paste and Finishing Solution
Aves Super White Apoxie 454g (1lb) — Bright White Epoxy Modelling Compound
Aves Studio

Aves Super White Apoxie 454g (1lb) — Bright White Epoxy Modelling Compound

£25.79
£25.79
Taxes included. Shipping calculated at checkout.

Out of stock

  • Store rating 4.9/5 · 2141 reviews
  • UK tracked delivery

DWG · Product Information

PROJ: SW1SW · SHEET 2 / 4

View · Overview

Product overview

Super White Apoxie 1 lb is the larger pack of the same bright white, firm, fine-grain compound, aimed at modellers who already know the material and need more for repeated sculpting, filling, bonding or restoration work. The crisp white body makes contours and small defects easier to read while shaping, and Aves rates its detail capability as exceptional. Its one-hour working window keeps the process focused, while the cured surface becomes hard, smooth and semi-gloss. The material can also be blended with regular Apoxie Sculpt colours when a custom shade is required.

  • This is the same Super White formulation as the smaller pack, supplied in a larger two-tub format.
  • The firm consistency and bright body are intended to support crisp, visible detail during shaping.
  • Fresh material can be smoothed with water or Aves Finishing Solution.
  • It accepts paint, stains, mica powders and other finishes after hardening.
  • Aves recommends gloves while combining the two components.

Notes · Q & A

What's the difference between Green Stuff and Milliput-type putties?

Green Stuff is flexible and springy, holding fine sculpted detail like cloth and cabling. Milliput-type putties are harder-setting and sand smooth once cured, which makes them better for gap-filling and surfaces you want to blend flat. Many sculptors mix the two.

How do I stop epoxy putty sticking to my tools and fingers?

Keep a little water on the tool and your fingertips as a release; the putty won't grab a wet surface. Work in good light and let very tacky putty firm up for a few minutes before shaping fine detail.

How do I get the mixing ratio right?

Most epoxy putties cure at a 1:1 mix of the two parts by volume, kneaded until the colour is fully even with no streaks. Under-mixing leaves soft patches that never fully harden, so mix longer than feels necessary.

How do I fill a seam gap cleanly without losing nearby detail?

Press a small amount of putty into the gap, then wipe the excess back with a wet tool or a cotton bud before it cures, leaving putty only in the recess. Cleaning up wet saves sanding over detail later.

Notes · Logistics

Shipping

Orders placed before 3pm (Mon–Fri) are dispatched the same day. UK delivery is by Royal Mail 24 Tracked. Free UK delivery on orders over £70. International delivery available via Royal Mail International Tracked or courier.

Returns

If you're not happy with your purchase, contact us within 30 days for a full refund or exchange. Items must be unused and in original packaging.

Table · Specification

Technical specifications

Product details
Brand
Aves Studio
Product code
SW1SW
Type
Epoxy Putty
Shipping weight
500 g
Colour
Super White
Made in
United States
Composition & curing
Chemistry
Two-part epoxy modelling compound (resin + catalyst, mixed 50:50 by weight)
Hardness
Hard
Working time
60 min
Full cure
24 h
Heat resistance
163 °C
Dimensions & contents
Net weight
454 g
Usage & compatibility
Bonds
Resin, Plastic, Glass, Stone, Fibreglass, Wood, Metal
Safety & compliance
Signal word
Warning
Hazards
H317 May cause an allergic skin reaction, H320 Causes eye irritation

Product

Aves Super White Apoxie 454g (1lb) — Bright White Epoxy Modelling Compound

Code (proj)

SW1SW

Ship. weight

500 g

Brand

Aves Studio

Hobby Heaven · By hobbyists, for hobbyists

Sheet 2 / 4

End of sheet

Complete The Job
Brand More from Aves Studio