Primary Colour Kit shown open: red, yellow, green and blue compound pods arranged beside the blister pack

Aves Apoxie Sculpt Primary Colour Kit 184g — Two-Part Epoxy Modelling Compound

£25.79
£25.79
Skip to product information
Primary Colour Kit shown open: red, yellow, green and blue compound pods arranged beside the blister pack
  • Primary Colour Kit shown open: red, yellow, green and blue compound pods arranged beside the blister pack
  • Primary Colour Kit pack front with the four colour pods and their Part B pods lifted out of the tray
  • Three-step guide: measure equal parts from two jars, knead for two minutes to a uniform colour, then shape and smooth
  • Four uses in one graphic: sculpting a bust, converting a miniature, repairing a cracked vase and building terrain
  • Apoxie Sculpt colour chart: twelve Part A colours as swatches beside a Part A jar and a Part B jar
  • Finished work: a runed bracer prop, a sculpted fairy being detailed with a tool, and a mossy ruin diorama
  • Service panel: UK stock shipped from Derby, same-day dispatch before 3pm, VAT included, direct from Aves USA
  • Size guide comparing the quarter-pound, one-pound and four-pound Apoxie Sculpt tubs, which are sold separately
  • Range graphic of Aves tubs and bottles: Apoxie Sculpt, Apoxie Clay, Apoxie Paste, FIXIT Paste and Finishing Solution
Aves Apoxie Sculpt Primary Colour Kit 184g — Two-Part Epoxy Modelling Compound
Aves Studio

Aves Apoxie Sculpt Primary Colour Kit 184g — Two-Part Epoxy Modelling Compound

£25.79
£25.79
Taxes included. Shipping calculated at checkout.

In stock · same-day dispatch before 3pm

  • Store rating 4.9/5 · 2141 reviews
  • UK tracked delivery

DWG · Product Information

PROJ: ASCK2 · SHEET 2 / 4

View · Overview

Product overview

The Aves Primary Colour Kit provides Red, Yellow, Green and Blue Apoxie Sculpt in four separate 1/10 lb colour sets, each supplied with Part A and Part B. It is aimed at modellers who want to build custom hues from a compact palette rather than purchase a full tub of every colour. Aves permits the coloured Part A portions to be blended first, before the corresponding amount of Part B is added. Careful, repeatable mixing matters: incomplete kneading produces poor results, and hand-mixed colour recipes will only remain consistent when their proportions are recorded and repeated.

  • Mix the chosen Part A colours together before adding the corresponding quantity of Part B.
  • Record the proportions used when a custom colour may be needed again, as hand-mixed shades depend on consistent measurement.
  • The kit contains no Black or White, so it is intended primarily for creating and adjusting hues rather than controlling value.
  • Knead for 2 minutes until the colour is uniform, then allow the mixed material to rest for 5 minutes before shaping.
  • The small portions suit experiments, details and repairs; repeated use of one established colour is better served by a larger individual pack.

Notes · Q & A

What's the difference between Green Stuff and Milliput-type putties?

Green Stuff is flexible and springy, holding fine sculpted detail like cloth and cabling. Milliput-type putties are harder-setting and sand smooth once cured, which makes them better for gap-filling and surfaces you want to blend flat. Many sculptors mix the two.

How do I stop epoxy putty sticking to my tools and fingers?

Keep a little water on the tool and your fingertips as a release; the putty won't grab a wet surface. Work in good light and let very tacky putty firm up for a few minutes before shaping fine detail.

How do I get the mixing ratio right?

Most epoxy putties cure at a 1:1 mix of the two parts by volume, kneaded until the colour is fully even with no streaks. Under-mixing leaves soft patches that never fully harden, so mix longer than feels necessary.

How do I fill a seam gap cleanly without losing nearby detail?

Press a small amount of putty into the gap, then wipe the excess back with a wet tool or a cotton bud before it cures, leaving putty only in the recess. Cleaning up wet saves sanding over detail later.

Notes · Logistics

Shipping

Orders placed before 3pm (Mon–Fri) are dispatched the same day. UK delivery is by Royal Mail 24 Tracked. Free UK delivery on orders over £70. International delivery available via Royal Mail International Tracked or courier.

Returns

If you're not happy with your purchase, contact us within 30 days for a full refund or exchange. Items must be unused and in original packaging.

Table · Specification

Technical specifications

Product details
Brand
Aves Studio
Product code
ASCK2
Type
Epoxy Putty
Shipping weight
160 g
Made in
United States
Composition & curing
Chemistry
Two-part epoxy modelling compound (resin + catalyst, mixed 50:50 by weight)
Hardness
Hard
Working time
180 min
Full cure
24 h
Heat resistance
163 °C
Dimensions & contents
Net weight
184 g
Pieces
4
Usage & compatibility
Bonds
Ceramic, Metal, Wood, Stone, Glass, Plastic, Polymer, Foam, Fibreglass, Epoxy
Safety & compliance
Signal word
Warning
Hazards
H317 May cause an allergic skin reaction, H320 Causes eye irritation
Set contents
Includes
Red 1/10 lb (Parts A + B) (set only)
Yellow 1/10 lb (Parts A + B) (set only)
Green 1/10 lb (Parts A + B) (set only)
Blue 1/10 lb (Parts A + B) (set only)

Product

Aves Apoxie Sculpt Primary Colour Kit 184g — Two-Part Epoxy Modelling Compound

Code (proj)

ASCK2

Ship. weight

160 g

Brand

Aves Studio

Hobby Heaven · By hobbyists, for hobbyists

Sheet 2 / 4

End of sheet

Complete The Job
Brand More from Aves Studio