Aves Apoxie Sculpt Stone White: Part A and Part B jars beside a pale grey cured lion sculpture

Aves Apoxie Sculpt 454g (1lb) Stone White — Two-Part Epoxy Modelling Compound

$39.33
$39.33
Skip to product information
Aves Apoxie Sculpt Stone White: Part A and Part B jars beside a pale grey cured lion sculpture
  • Aves Apoxie Sculpt Stone White: Part A and Part B jars beside a pale grey cured lion sculpture
  • Aves Apoxie Sculpt Stone White 1 lb jars with a white Part A ball and a grey Part B ball before mixing
  • Feature graphic with two stacked Apoxie tubs listing self-hardening, waterproof and zero-shrinkage properties
  • Aves Studio Apoxie Sculpt two part epoxy compound showing black Part B and grey Part A ready to sculpt
  • Three-step guide: measure equal parts from two jars, knead for two minutes to a uniform colour, then shape and smooth
  • Four uses in one graphic: sculpting a bust, converting a miniature, repairing a cracked vase and building terrain
  • Sculpted eagle in cured epoxy beside Apoxie Sculpt tubs, with an inset of a wing being sanded smooth
  • Apoxie Sculpt colour chart: twelve Part A colours as swatches beside a Part A jar and a Part B jar
  • Finished work: a runed bracer prop, a sculpted fairy being detailed with a tool, and a mossy ruin diorama
  • Service panel: UK stock shipped from Derby, same-day dispatch before 3pm, VAT included, direct from Aves USA
  • Size guide comparing the quarter-pound, one-pound and four-pound Apoxie Sculpt tubs, which are sold separately
  • Range graphic of Aves tubs and bottles: Apoxie Sculpt, Apoxie Clay, Apoxie Paste, FIXIT Paste and Finishing Solution
  • Aves Studio Apoxie Sculpt key features including self hardening waterproof durable finish and no drying out before mixing
  • Aves Studio Apoxie Sculpt Natural showing Part A and Part B with guidance that both parts look similar before mixing
  • Aves marketing collage: detailing a grey relief sculpture, a mosaic panel and mosaic pendants beside Apoxie Sculpt jars
Aves Apoxie Sculpt 454g (1lb) Stone White — Two-Part Epoxy Modelling Compound
Aves Studio

Aves Apoxie Sculpt 454g (1lb) Stone White — Two-Part Epoxy Modelling Compound

$39.33
$39.33
Shipping calculated at checkout.

Out of stock

  • Store rating 4.9/5 · 2170 reviews
  • UK tracked delivery

DWG · Product Information

PROJ: AS1WHI · SHEET 2 / 4

View · Overview

Product overview

The 1 lb Stone White format provides a regular working quantity for pale sculpting, prototypes and repeated seam or restoration work. Two 8 oz jars hold the separate components until a batch is needed. Aves lists the current colour name as Stone White, but older packaging can be printed WHITE; receiving a jar marked WHITE does not indicate a different product. The shade is described by Aves as nearer copy-paper white, distinct from the separate brighter-white compound.

  • Its working period runs for 1–3 hours; the material self-hardens without baking and must cure fully for 24 hours before sanding or drilling.
  • Mix equal parts A and B at 50/50 and knead continuously for two minutes until the colour is even.
  • Aves records 0% shrinkage or cracking and a cured state that is hard and waterproof.
  • Resting the fresh mixture for five minutes improves handling, while cold water can reduce sticking during detail work.

Notes · Q & A

What's the difference between Green Stuff and Milliput-type putties?

Green Stuff is flexible and springy, holding fine sculpted detail like cloth and cabling. Milliput-type putties are harder-setting and sand smooth once cured, which makes them better for gap-filling and surfaces you want to blend flat. Many sculptors mix the two.

How do I stop epoxy putty sticking to my tools and fingers?

Keep a little water on the tool and your fingertips as a release; the putty won't grab a wet surface. Work in good light and let very tacky putty firm up for a few minutes before shaping fine detail.

How do I get the mixing ratio right?

Most epoxy putties cure at a 1:1 mix of the two parts by volume, kneaded until the colour is fully even with no streaks. Under-mixing leaves soft patches that never fully harden, so mix longer than feels necessary.

How do I fill a seam gap cleanly without losing nearby detail?

Press a small amount of putty into the gap, then wipe the excess back with a wet tool or a cotton bud before it cures, leaving putty only in the recess. Cleaning up wet saves sanding over detail later.

Notes · Logistics

Shipping

Orders placed before 3pm (Mon–Fri) are dispatched the same day. UK delivery is by Royal Mail 24 Tracked. Free UK delivery on orders over £70. International delivery available via Royal Mail International Tracked or courier.

Returns

If you're not happy with your purchase, contact us within 30 days for a full refund or exchange. Items must be unused and in original packaging.

Table · Specification

Technical specifications

Product details
Brand
Aves Studio
Product code
AS1WHI
Type
Epoxy Putty
Shipping weight
590 g
Colour
Stone White
Composition & curing
Chemistry
Two-part epoxy modelling compound (resin + catalyst, mixed 50:50 by weight)
Hardness
Hard
Working time
180 min
Full cure
24 h
Heat resistance
163 °C
Dimensions & contents
Net weight
454 g
Usage & compatibility
Bonds
Ceramic, Metal, Wood, Stone, Glass, Plastic, Polymer, Foam, Fibreglass, Epoxy
Safety & compliance
Signal word
Warning
Hazards
H317 May cause an allergic skin reaction, H320 Causes eye irritation

Product

Aves Apoxie Sculpt 454g (1lb) Stone White — Two-Part Epoxy Modelling Compound

Code (proj)

AS1WHI

Ship. weight

590 g

Brand

Aves Studio

Hobby Heaven · By hobbyists, for hobbyists

Sheet 2 / 4

End of sheet

Complete The Job
Brand More from Aves Studio