AK Interactive Styrene Rod 0.5mm x 350mm, 10 pcs (AK6536)

Name: AK Interactive Styrene Rod 0.5mm x 350mm, 10 pcs (AK6536)
Brand: AK Interactive
SKU: AK6536
Price: 5.71 CAD
Availability: InStock

$5.71

Shipping calculated at checkout.

In stock · same-day dispatch before 3pm

Store rating 4.9/5 · 2180 reviews
UK tracked delivery

DWG · Product Information

PROJ: AK6536 · SHEET 2 / 4

View · Overview

Product overview

AK6536 gives you ten 350 mm lengths of 0.5 mm round stock for very fine scratch-built detail. Its small diameter suits slender parts such as aerials, handrails, rigging and narrow pipe runs, while the full-length pieces can be cut down to match the model. Short sections can also be sliced for tiny circular details. Use a sharp modelling knife for clean cuts, then sand the end where needed before fitting.

Solid all the way through — AK's own description reads "solid round polystyrene rods"
Polystyrene, so ordinary plastic cement and primer work on it
AK's card gives the imperial size as .020 in across by 13.78 in long

Notes · Q & A

What do the dimensions mean?

The first figures describe the cross-section, followed by the stock length or sheet format. Strip is listed as thickness × width × length, round stock uses outside diameter × length, and sheet uses thickness × 245 × 195 mm. The 0.7 mm wall applies only to products explicitly described as hollow tube.

How should I cut modelling styrene?

Score thin sheet and flat strip against a metal straightedge, then snap it along the cut. For thicker sheet and larger profiles, use repeated knife passes or a fine razor saw rather than forcing one deep cut. Clean the edge afterwards with a fine file or abrasive.

What glue should I use for styrene stock?

Ordinary plastic or solvent cement is the usual choice because it softens the mating surfaces and welds the polystyrene together. Test-fit the pieces first and apply the cement sparingly, especially around fine details or exposed surfaces.

How do I choose a thickness or profile?

Choose according to the shape you need and how you intend to cut or form it. Thin sheet and strip are easier to score, snap and curve by hand, while thicker sections usually need repeated knife passes or a fine saw. Rod, tube, angle, channel and half-round profiles provide ready-made cross-sections for particular details.

Does AK styrene need special preparation before painting?

No special paint system is required; treat it like an ordinary polystyrene kit part. Remove cutting and sanding dust, apply primer where appropriate, and use your usual modelling paints.

Notes · Logistics

Shipping

Orders placed before 3pm (Mon–Fri) are dispatched the same day. UK delivery is by Royal Mail 24 Tracked. Free UK delivery on orders over £70. International delivery available via Royal Mail International Tracked or courier.

Returns

If you're not happy with your purchase, contact us within 30 days for a full refund or exchange. Items must be unused and in original packaging.

Table · Specification