Pack of 1 - single 15 x 3 mm N42 neodymium disc magnet on a half-inch reference grid

15mm x 3mm N42 Neodymium Disc Magnets

1
$3.87
$3.87
Skip to product information
Pack of 1 - single 15 x 3 mm N42 neodymium disc magnet on a half-inch reference grid
  • Pack of 1 - single 15 x 3 mm N42 neodymium disc magnet on a half-inch reference grid
  • Overview panel for 15 x 3 mm N42 neodymium disc magnets - 3200 g calculated pull to steel at zero gap, NiCuNi plating, axial magnetisation
  • Stacked rows of 15 x 3 mm N42 neodymium disc magnets shown at real size
  • Infographic - calculated pull reference of 3200 g for a 15 x 3 mm N42 disc magnet on clean flat steel with zero gap
  • Stacked columns of 15 x 3 mm neodymium disc magnets with black spacers between the discs on a dark background
  • Angled view of 15 x 3 mm neodymium disc magnets stacked in parallel rows with black spacers between the discs
  • Rows of 15 x 3 mm neodymium disc magnets separated by black spacers viewed from the side on a dark background
  • Close view of 15 x 3 mm neodymium disc magnet stacks with black spacers between each disc
  • Long stacked rows of 15 x 3 mm neodymium disc magnets with black spacers on a dark background
  • Magnet safety warning panel: swallowing two or more magnets can cause serious internal injury; keep away from children and medical devices, handle and store with care
  • Infographic - separating small disc magnets safely: slide sideways, keep the stack controlled, mind loose steel and blades
  • Infographic - how diameter and thickness affect disc magnet holding strength and how to read the D x H size format
  • Size chart comparing 2 x 1 mm, 3 x 2 mm and 5 x 3 mm disc magnets on a cutting mat with calculated zero-gap pull of 50 g, 210 g and 650 g
  • Infographic explaining magnet holding force: full pull at direct contact, weaker shear under sideways load, reduced hold across a gap
15mm x 3mm N42 Neodymium Disc Magnets
Hobby Heaven

15mm x 3mm N42 Neodymium Disc Magnets

$3.87
$3.87
Taxes included. Shipping calculated at checkout.
Pack Size
Number of packs

In stock · same-day dispatch before 3pm

  • Store rating 4.9/5 · 2169 reviews
  • UK tracked delivery

DWG · Product Information

PROJ: MAG/D15X3/1 · SHEET 2 / 4

View · Overview

Product overview

The 15 × 3 mm disc is the point where this range becomes a workshop fixing rather than a miniature component. Each magnet is N42 neodymium with a NiCuNi coating and axial magnetisation, giving a wide face for heavy closures, tool fixtures and large modular assemblies.

A calculated zero-gap pull reference of 3,200 g puts this size into kilogram-scale holding without requiring a deeper recess than the other 3 mm formats. Use it for substantial cabinet or equipment doors, jig and gauge mounts, removable guards, heavy case lids and large scenery modules that must break down for transport. The estimated sideways shear is approximately 480 g, so the joint should be designed to separate face-to-face rather than slide under load. Packs are supplied with black plastic spacers between the magnets. The spacers reduce face-to-face attraction inside the stack, making controlled separation practical; slide a magnet and its spacer sideways together, then peel the spacer away.

Cut the mounting pocket with a 15 mm bit to a depth of 3.2 mm, or allow a 15.1 mm hole in a printed component. Keep the magnet flush, use the adhesive allowance rather than forcing it into a tight blind hole, and dry-fit the mating part before final bonding.

Notes · Q & A

Which magnet size should I choose for miniatures?

A 2×1 mm disc suits infantry weapon swaps, while 3×1 mm is a practical step up for arms and small components. Sizes around 3×2 to 5×2 mm work well for basing and larger parts, with 5×3 mm and above better suited to vehicles, large models and army transport. Each listing includes a calculated pull figure in grams so you can compare sizes on the same basis.

What does the N42 magnet grade mean?

The grade describes the magnetic material: at identical dimensions, a higher number generally produces more pull. N52 is typically around 20–25% stronger than N42 at the same size, but increasing the magnet's diameter or thickness usually makes a larger practical difference than changing grade alone. Our range is clearly specified as N42.

How do I keep the polarity consistent?

Before separating the stack, mark one face with a permanent marker and use that mark as your polarity reference. Dry-fit every pair before applying adhesive, and glue the two halves while the magnets are still attracting each other in the intended orientation. Reversing one magnet is one of the most common magnetisation mistakes.

What size hole should I drill for a magnet?

Use a drill matching the magnet diameter; for a designed 3D-printed socket, allow roughly 0.1 mm extra diameter. Make the recess approximately the magnet thickness plus 0.2 mm for adhesive so the face can sit level with the surrounding surface. CA adhesive is suitable for fixing these magnets into plastic, resin or metal parts.

How should neodymium magnets be handled safely?

Swallowing two or more magnets can cause serious internal injury, so keep loose magnets away from children and use them only for adult hobby work. Neodymium magnets are also brittle and may chip if allowed to snap together. Bring them together slowly from the edge rather than letting their flat faces strike each other.

Notes · Logistics

Shipping

Orders placed before 3pm (Mon–Fri) are dispatched the same day. UK delivery is by Royal Mail 24 Tracked. Free UK delivery on orders over £70. International delivery available via Royal Mail International Tracked or courier.

Returns

If you're not happy with your purchase, contact us within 30 days for a full refund or exchange. Items must be unused and in original packaging.

Table · Specification

Technical specifications

Product details
Brand
Hobby Heaven
Product code
MAG/D15X3/1
Type
Accessories
Made in
China
Dimensions & contents
Diameter
15 mm
Thickness
3 mm
Weight per magnet
4.03 g
Magnetic properties
Grade
N42
Pull to steel (calculated, zero gap)
3200 g
Pull to steel
31.38 N
Magnet-to-magnet pull
3200 g
Shear resistance (estimate)
480 g
Magnetisation
Axial
Max working temperature
80 °C
Coating
Nickel-Copper-Nickel (NiCuNi)
Usage & compatibility
Drill bit
15 mm
Hole in 3D prints
15.1 mm
Recess depth
3.2 mm
Size comparison
15 mm — slightly smaller than a 5p coin (18 mm)
Related sizes
Also consider
12mm x 2mm N42 Neodymium Disc Magnets
10mm x 3mm N42 Neodymium Disc Magnets
20mm x 3mm N42 Neodymium Disc Magnets

Product

15mm x 3mm N42 Neodymium Disc Magnets

Code (proj)

MAG/D15X3/1

Brand

Hobby Heaven

Hobby Heaven · By hobbyists, for hobbyists

Sheet 2 / 4

End of sheet

Complete The Job
Brand More from Hobby Heaven