Green Stuff World Slow-Dry Cement Glue 40ml – Plastic Model Adhesive with Fine Brush
🕐 Slow Cement – More Time to Get It Right
Same chemical weld, but with 5-10 minutes to adjust. Position large parts calmly. No rushing. Clean, sandable joints.
📦 What You Get
40ml glass bottle with ultra-fine brush applicator – a slow-setting plastic cement that gives you 5-10 minutes to position parts before the bond sets. Same chemical welding action as standard cement (melts plastic surfaces together), but with extended open time for large assemblies and complex fits. Full strength after about 1 hour.
🔀 Slow vs Standard Cement
| Standard Cement | Slow Cement ✓ | |
| Working time | 10-30 seconds | 5-10 minutes |
| Full cure | Minutes | ~1 hour |
| Repositionable | ❌ No | ✓ Yes |
| Best for | Small, quick jobs | Large parts, complex fits |
| Bond strength | Excellent | Excellent |
✓ Works With / ✗ Doesn't Work With
✅ Yes – Plastics
- Polystyrene (PS)
- ABS
- uPVC
- Plasticard / sheet styrene
❌ No – Other Materials
- Resin (use CA glue)
- Metal (use CA or epoxy)
- Wood, fabric, rubber
- PE/PP soft plastics
🎯 What's It Good For?
🚗 Large Assemblies
- Vehicle hulls and fuselages
- Building walls and structures
- Multi-part subassemblies
- Time to align before set
🏛️ Terrain & Dioramas
- Plasticard scenery builds
- Complex architectural fits
- Layered constructions
- Adjust angles precisely
✈️ Scale Models
- Wing-to-fuselage joins
- Hull halves alignment
- Fiddly multi-part fits
- Clean seams for finishing
🎨 Plastic Texturing
- Softens surface for sculpting
- Molten metal effects
- Weathered/corroded armour
- Industrial cast textures
✨ Bonus Use: Plastic Texturing
Brush a thin layer onto plastic and wait a few seconds until the surface softens. Then stipple with a stiff brush, dab with sponge, or press with textured sprue to create effects like molten metal, heat-damaged panels, industrial castings, corroded armour – no putty or texture paints needed. The slow-set formula gives you time to work the surface before it re-hardens.
⚡ How to Use
📋 Specifications
| Volume | 40ml |
| Type | Slow-setting plastic cement |
| Working time | 5-10 minutes |
| Full cure | ~1 hour |
| Container | Glass bottle (~44×44×60mm) |
| Applicator | Ultra-fine brush in cap |
| Works on | PS, ABS, uPVC, plasticard |
| Manufacturer | Green Stuff World (Spain) |
✅ Pros
- 5-10 min to reposition parts
- True chemical weld – strong bond
- Clean, sandable joints
- Double-use: glue + texturing tool
- Fine brush for precision
- Glass bottle – solvent safe
⚠️ Keep in Mind
- Slower = longer wait for full cure
- Plastics only – not resin/metal
- Solvent fumes – ventilate
- Can damage paint if spilled
⚠️ Safety: Use in well-ventilated area. Solvent-based – avoid inhaling fumes. Keep away from eyes and skin. Cap tightly after use. Flammable. Keep away from children.
🏪 Hobby Heaven – Authorised Green Stuff World Dealer UK
Our brands
