DSPIAE CB-25 carbon fibre sanding board standing on end, 25 mm wide with its 25MM*75MM size label

DSPIAE CB-25 Carbon Fibre Sanding Board 25mm

$4.77
$4.77
Skip to product information
DSPIAE CB-25 carbon fibre sanding board standing on end, 25 mm wide with its 25MM*75MM size label
  • DSPIAE CB-25 carbon fibre sanding board standing on end, 25 mm wide with its 25MM*75MM size label
  • The DSPIAE CB-25 carbon fibre sanding board shown flat and named, the widest board in the range
  • Diagram: a square-edged stick cannot reach an inside corner while the angled carbon board can
  • A narrow carbon board sanding a part held in a vice, and a wider board flexed between gloved fingers
  • Colour-coded grit stickers from 800# to 1500# applied to the ends of three carbon fibre sanding boards
  • Gloved hands holding a carbon fibre sanding board against a red model part, with the range's four claim icons
  • Four DSPIAE carbon fibre sanding boards in three widths on a cutting mat, under the range headline
DSPIAE CB-25 Carbon Fibre Sanding Board 25mm
DSPIAE

DSPIAE CB-25 Carbon Fibre Sanding Board 25mm

$4.77
$4.77
Taxes included. Shipping calculated at checkout.

In stock · same-day dispatch before 3pm

  • Store rating 4.9/5 · 2177 reviews
  • UK tracked delivery

DWG · Product Information

PROJ: CB-25 · SHEET 2 / 4

View · Overview

Product overview

The DSPIAE CB-25 is a 25 mm carbon fibre carrier for replaceable self-adhesive abrasive, combining a wide sanding area with low mass. The board stays in service while a worn strip is peeled away and renewed, so its job is to hold the paper flat rather than supply the cut. Paper is sourced separately for either wet- or dry-sanding work.

  • The wide face suits larger surfaces where faster, even coverage matters more than confined access.
  • Carbon fibre provides a light backing that resists stretching and bending.
  • Angled longitudinal edges reach further into inside corners than square-edged sticks.
  • The supplied ID labels cover 180# through 2500# and identify the abrasive mounted on the board.

Notes · Q & A

What's the difference between a needle file and a sanding stick?

Needle files are steel, cut faster and hold their shape for tight spots and metal. Sanding sticks are foam or paper-backed abrasive, kinder to plastic and better for smoothing broad, flat surfaces without gouging.

Which grit should I start with on mould lines?

For plastic, start around 400 grit to knock the line back, then refine with 600–800. Coarser than 400 leaves scratches you then have to chase out, so only go lower for resin flash or heavy work.

Should I file wet or dry?

Wet sanding with a drop of water reduces dust and clogging and gives a finer finish, which matters on resin where the dust is best not inhaled. Dry filing is fine for quick metal work and steel needle files.

How do I stop a file clogging with plastic or resin?

Brush it out with a stiff brass brush along the cut direction. For sanding sticks, tap them clean often. Clogged abrasive stops cutting and starts burnishing, which just polishes the high spots rather than removing them.

Notes · Logistics

Shipping

Orders placed before 3pm (Mon–Fri) are dispatched the same day. UK delivery is by Royal Mail 24 Tracked. Free UK delivery on orders over £70. International delivery available via Royal Mail International Tracked or courier.

Returns

If you're not happy with your purchase, contact us within 30 days for a full refund or exchange. Items must be unused and in original packaging.

Table · Specification

Technical specifications

Product details
Brand
DSPIAE
Product code
CB-25
Type
Tools
Tool type
Sanding board
Shipping weight
3 g
Barcode
6977151540942
Dimensions & contents
Tool length
75 mm
Tool width
25 mm
In the box
Carbon fibre sanding board, Grit ID stickers
Materials & finish
Material
Carbon fibre

Product

DSPIAE CB-25 Carbon Fibre Sanding Board 25mm

Code (proj)

CB-25

Ship. weight

3 g

Brand

DSPIAE

Hobby Heaven · By hobbyists, for hobbyists

Sheet 2 / 4

End of sheet

Complete The Job
Brand More from DSPIAE