DSPIAE AT-AP Multi-Purpose Processing Assistance Platform: silver aluminium cube beside its white box on a red-lit desk

DSPIAE AT-AP Multi-Purpose Processing Assistance Platform

$66.95
$66.95
Skip to product information
DSPIAE AT-AP Multi-Purpose Processing Assistance Platform: silver aluminium cube beside its white box on a red-lit desk
  • DSPIAE AT-AP Multi-Purpose Processing Assistance Platform: silver aluminium cube beside its white box on a red-lit desk
  • DSPIAE AT-AP white box beside the silver aluminium processing cube with its red knob
  • DSPIAE Multi-Purpose Processing Assistance Platform title panel showing two views of the cube
  • DSPIAE Hobby Cube panel: concentric drilling, plastic sheet corner cutting, triangular and half-round rod making
  • DSPIAE Hobby Cube panel: fixed width cutting, angled sheet joining and plastic rod chamfering
  • DSPIAE Hobby Cube panel: anodised aluminium, vertical drilling guide and fixed angle cutting slots
  • DSPIAE Hobby Cube panel: centre drilling plastic rods from 1.5 to 10.5 mm with a 3.175 mm shank bit
  • DSPIAE Hobby Cube panel: vertical drilling with a 0-34 mm gauge for evenly spaced holes in plastic rod
  • DSPIAE Hobby Cube panel: holding two plastic sheets at 30, 45, 60, 90, 120 or 135 degrees for cementing
  • DSPIAE Hobby Cube panel: bevelling the end of a plastic rod, with a replaceable 6 mm wide blade
  • DSPIAE Hobby Cube panel: sanding 1 and 2 mm square or round rod into triangular or half-round section
  • DSPIAE Hobby Cube panel: fixed angle cutting at 30, 45, 60, 75 and 90 degrees with a 0-34 mm gauge
  • DSPIAE Hobby Cube panel: equal width strips down to 0.5 mm, 44 mm cutting length, 1-10 mm sheet chamfers
  • DSPIAE AT-AP specifications: 62 x 42 x 42 mm, 180 g, aluminium alloy, platform, hex wrench and manual
DSPIAE AT-AP Multi-Purpose Processing Assistance Platform
DSPIAE

DSPIAE AT-AP Multi-Purpose Processing Assistance Platform

$66.95
$66.95
Taxes included. Shipping calculated at checkout.

In stock · same-day dispatch before 3pm

  • Store rating 4.9/5 · 2208 reviews
  • UK tracked delivery

DWG · Product Information

PROJ: AT-AP · SHEET 2 / 4

View · Overview

Product overview

The AT-AP "Hobby cube" is DSPIAE's aluminium jig for plastic sheet and rod work. Its slider centres a drill on plastic rod from 1.5 to 10.5 mm for concentric holes, and a second guide drills vertical holes, with a 0–34 mm gauge for spacing. Slots cut at 30°, 45°, 60°, 75° and 90°, or equal strips down to 0.5 mm, up to 44 mm long. It also chamfers sheet edges by 1–10 mm, bevels rod ends, holds two sheets at a set angle while cement dries, and helps sand 1 or 2 mm rod to half-round or triangle section.

  • Drilling guides take drill bits with a 3.175 mm shank only
  • The bevelling blade can be replaced with a 6 mm wide blade
  • 62 × 42 × 42 mm, 180 g, anodised aluminium alloy
  • Hex wrench and manual included; not for under-14s

Notes · Q & A

Sprue cutters or a hobby knife — what do I actually need?

Cutters remove parts from the sprue cleanly; the knife trims the leftover nub and mould lines. You'll want both — they do different jobs.

What's the difference between single-blade and double-blade cutters?

Single-blade cutters shear against a flat anvil for an ultra-clean cut with less stress on the plastic; double-blade cutters are tougher for general work.

How do I keep tools in good condition?

Cut plastic only (never metal sprues or wire) with precision cutters, replace knife blades often, and keep files clear with a brass brush.

Notes · Logistics

Shipping

Orders placed before 3pm (Mon–Fri) are dispatched the same day. UK delivery is by Royal Mail 24 Tracked. Free UK delivery on orders over £70. International delivery available via Royal Mail International Tracked or courier.

Returns

If you're not happy with your purchase, contact us within 30 days for a full refund or exchange. Items must be unused and in original packaging.

Table · Specification

Technical specifications

Product details
Brand
DSPIAE
Product code
AT-AP
Type
Tools
Tool type
Processing assistance platform
Shipping weight
280 g
Barcode
6977151546234
Dimensions & contents
Net weight
180 g
Tool length
62 mm
Tool width
42 mm
Tool height
42 mm
In the box
Platform ×1, Hex wrench ×1, Manual ×1
Materials & finish
Material
Aluminium alloy
Usage & compatibility
Capacity
1.5–10.5 mm rod diameter

Product

DSPIAE AT-AP Multi-Purpose Processing Assistance Platform

Code (proj)

AT-AP

Ship. weight

280 g

Brand

DSPIAE

Hobby Heaven · By hobbyists, for hobbyists

Sheet 2 / 4

End of sheet

Complete The Job
Brand More from DSPIAE