Aves Apoxie Sculpt Natural 1/4 lb product packaging image with retail blister card Part A and Part B sample cups close up views of the natural modelling compound and a sculpted dragon head

Aves Apoxie Sculpt 113g (¼lb) Natural — Two-Part Epoxy Modelling Compound

$22.56
$22.56
Skip to product information
Aves Apoxie Sculpt Natural 1/4 lb product packaging image with retail blister card Part A and Part B sample cups close up views of the natural modelling compound and a sculpted dragon head
  • Aves Apoxie Sculpt Natural 1/4 lb product packaging image with retail blister card Part A and Part B sample cups close up views of the natural modelling compound and a sculpted dragon head
  • Aves Apoxie Sculpt Natural ¼ lb retail card with Part A and Part B pods, printed Net Wt. 4 oz. (113.5 g)
  • Aves Apoxie Sculpt Natural 1/4 lb key features graphic showing self hardening waterproof durable cure hard and wont dry out benefits with Part A and Part B sample cups
  • Three-step guide: measure equal parts from two jars, knead for two minutes to a uniform colour, then shape and smooth
  • Aves Apoxie Sculpt Natural 1/4 lb hand packed carefully crafted image showing Part A and Part B sample cups with the natural coloured modeling compound before mixing
  • Four uses in one graphic: sculpting a bust, converting a miniature, repairing a cracked vase and building terrain
  • Apoxie Sculpt colour chart: twelve Part A colours as swatches beside a Part A jar and a Part B jar
  • Finished work: a runed bracer prop, a sculpted fairy being detailed with a tool, and a mossy ruin diorama
  • Service panel: UK stock shipped from Derby, same-day dispatch before 3pm, VAT included, direct from Aves USA
  • Size guide comparing the quarter-pound, one-pound and four-pound Apoxie Sculpt tubs, which are sold separately
  • Range graphic of Aves tubs and bottles: Apoxie Sculpt, Apoxie Clay, Apoxie Paste, FIXIT Paste and Finishing Solution
Aves Apoxie Sculpt 113g (¼lb) Natural — Two-Part Epoxy Modelling Compound
Aves Studio

Aves Apoxie Sculpt 113g (¼lb) Natural — Two-Part Epoxy Modelling Compound

$22.56
$22.56
Taxes included. Shipping calculated at checkout.

Out of stock

  • Store rating 4.9/5 · 2170 reviews
  • UK tracked delivery

DWG · Product Information

PROJ: AS1/4NAT · SHEET 2 / 4

View · Overview

Product overview

The ¼ lb Natural kit is a practical first quantity for testing Apoxie Sculpt on a miniature conversion, small prototype or contained repair. Its putty-like working character gives 1–3 hours for shaping, while the self-hardening compound needs no baking. The blister-card format contains two 2 oz pods, keeping the components apart until a batch is required. Natural demands one extra check: because Parts A and B share the same colour, mix for the full two minutes by the clock rather than judging uniformity by eye, and expect slight warmth during activation.

  • Measure equal parts A and B at 50/50 before kneading to activate the batch.
  • A five-minute rest after mixing improves handling before detailed work begins.
  • Full cure takes 24 hours; wait until that point before sanding or drilling.
  • Aves claims 0% shrinkage and a cured result that is hard and waterproof.

Notes · Q & A

What's the difference between Green Stuff and Milliput-type putties?

Green Stuff is flexible and springy, holding fine sculpted detail like cloth and cabling. Milliput-type putties are harder-setting and sand smooth once cured, which makes them better for gap-filling and surfaces you want to blend flat. Many sculptors mix the two.

How do I stop epoxy putty sticking to my tools and fingers?

Keep a little water on the tool and your fingertips as a release; the putty won't grab a wet surface. Work in good light and let very tacky putty firm up for a few minutes before shaping fine detail.

How do I get the mixing ratio right?

Most epoxy putties cure at a 1:1 mix of the two parts by volume, kneaded until the colour is fully even with no streaks. Under-mixing leaves soft patches that never fully harden, so mix longer than feels necessary.

How do I fill a seam gap cleanly without losing nearby detail?

Press a small amount of putty into the gap, then wipe the excess back with a wet tool or a cotton bud before it cures, leaving putty only in the recess. Cleaning up wet saves sanding over detail later.

Notes · Logistics

Shipping

Orders placed before 3pm (Mon–Fri) are dispatched the same day. UK delivery is by Royal Mail 24 Tracked. Free UK delivery on orders over £70. International delivery available via Royal Mail International Tracked or courier.

Returns

If you're not happy with your purchase, contact us within 30 days for a full refund or exchange. Items must be unused and in original packaging.

Table · Specification

Technical specifications

Product details
Brand
Aves Studio
Product code
AS1/4NAT
Type
Epoxy Putty
Shipping weight
250 g
Colour
Natural
Composition & curing
Chemistry
Two-part epoxy modelling compound (resin + catalyst, mixed 50:50 by weight)
Hardness
Hard
Working time
180 min
Full cure
24 h
Heat resistance
163 °C
Dimensions & contents
Net weight
113.5 g
Usage & compatibility
Bonds
Ceramic, Metal, Wood, Stone, Glass, Plastic, Polymer, Foam, Fibreglass, Epoxy
Safety & compliance
Signal word
Warning
Hazards
H317 May cause an allergic skin reaction, H320 Causes eye irritation

Product

Aves Apoxie Sculpt 113g (¼lb) Natural — Two-Part Epoxy Modelling Compound

Code (proj)

AS1/4NAT

Ship. weight

250 g

Brand

Aves Studio

Hobby Heaven · By hobbyists, for hobbyists

Sheet 2 / 4

End of sheet

Complete The Job
Brand More from Aves Studio