Aves Apoxie Sculpt Black 1/4 lb promotional image highlighting high durability and zero cracks with retail pack opened sample cups and a finished black sculpture

Aves Apoxie Sculpt 113g (¼lb) Black — Two-Part Epoxy Modelling Compound

$22.56
$22.56
Skip to product information
Aves Apoxie Sculpt Black 1/4 lb promotional image highlighting high durability and zero cracks with retail pack opened sample cups and a finished black sculpture
  • Aves Apoxie Sculpt Black 1/4 lb promotional image highlighting high durability and zero cracks with retail pack opened sample cups and a finished black sculpture
  • Aves Apoxie Sculpt Black 1/4 lb product packaging image showing retail blister pack with Part A and Part B sample cups for self hardening modelling and repair compound
  • Three-step guide: measure equal parts from two jars, knead for two minutes to a uniform colour, then shape and smooth
  • Four uses in one graphic: sculpting a bust, converting a miniature, repairing a cracked vase and building terrain
  • Apoxie Sculpt colour chart: twelve Part A colours as swatches beside a Part A jar and a Part B jar
  • Finished work: a runed bracer prop, a sculpted fairy being detailed with a tool, and a mossy ruin diorama
  • Service panel: UK stock shipped from Derby, same-day dispatch before 3pm, VAT included, direct from Aves USA
  • Size guide comparing the quarter-pound, one-pound and four-pound Apoxie Sculpt tubs, which are sold separately
  • Range graphic of Aves tubs and bottles: Apoxie Sculpt, Apoxie Clay, Apoxie Paste, FIXIT Paste and Finishing Solution
Aves Apoxie Sculpt 113g (¼lb) Black — Two-Part Epoxy Modelling Compound
Aves Studio

Aves Apoxie Sculpt 113g (¼lb) Black — Two-Part Epoxy Modelling Compound

$22.56
$22.56
Taxes included. Shipping calculated at checkout.

In stock · same-day dispatch before 3pm

  • Store rating 4.9/5 · 2170 reviews
  • UK tracked delivery

DWG · Product Information

PROJ: AS1/4BLK · SHEET 2 / 4

View · Overview

Product overview

The ¼ lb Black kit is the small-format entry point for trying Apoxie Sculpt on miniature conversions, seam filling, embellishment or a compact prototype. Its smooth, putty-like feel combines sculpting control with the adhesive behaviour of epoxy, allowing additions to be shaped where they are needed. This format keeps the quantity focused when only a few parts or one contained project need material. Aves gives a 1–3-hour working range; the compound then self-hardens without baking.

  • The ¼ lb presentation contains two 2 oz pods mounted on a blister card.
  • Take equal parts A and B, mix them 50/50, then knead for two minutes until no colour variation remains.
  • Allow the complete 24-hour cure before sanding or drilling the finished work.
  • Aves states that the cured compound is hard and waterproof, with 0% shrinkage or cracking.
  • Any Part A colour may be blended with another Part A before the matching amount of Part B is added.

Notes · Q & A

What's the difference between Green Stuff and Milliput-type putties?

Green Stuff is flexible and springy, holding fine sculpted detail like cloth and cabling. Milliput-type putties are harder-setting and sand smooth once cured, which makes them better for gap-filling and surfaces you want to blend flat. Many sculptors mix the two.

How do I stop epoxy putty sticking to my tools and fingers?

Keep a little water on the tool and your fingertips as a release; the putty won't grab a wet surface. Work in good light and let very tacky putty firm up for a few minutes before shaping fine detail.

How do I get the mixing ratio right?

Most epoxy putties cure at a 1:1 mix of the two parts by volume, kneaded until the colour is fully even with no streaks. Under-mixing leaves soft patches that never fully harden, so mix longer than feels necessary.

How do I fill a seam gap cleanly without losing nearby detail?

Press a small amount of putty into the gap, then wipe the excess back with a wet tool or a cotton bud before it cures, leaving putty only in the recess. Cleaning up wet saves sanding over detail later.

Notes · Logistics

Shipping

Orders placed before 3pm (Mon–Fri) are dispatched the same day. UK delivery is by Royal Mail 24 Tracked. Free UK delivery on orders over £70. International delivery available via Royal Mail International Tracked or courier.

Returns

If you're not happy with your purchase, contact us within 30 days for a full refund or exchange. Items must be unused and in original packaging.

Table · Specification

Technical specifications

Product details
Brand
Aves Studio
Product code
AS1/4BLK
Type
Epoxy Putty
Shipping weight
250 g
Colour
Black
Composition & curing
Chemistry
Two-part epoxy modelling compound (resin + catalyst, mixed 50:50 by weight)
Hardness
Hard
Working time
180 min
Full cure
24 h
Heat resistance
163 °C
Dimensions & contents
Net weight
113.5 g
Usage & compatibility
Bonds
Ceramic, Metal, Wood, Stone, Glass, Plastic, Polymer, Foam, Fibreglass, Epoxy
Safety & compliance
Signal word
Warning
Hazards
H317 May cause an allergic skin reaction, H320 Causes eye irritation

Product

Aves Apoxie Sculpt 113g (¼lb) Black — Two-Part Epoxy Modelling Compound

Code (proj)

AS1/4BLK

Ship. weight

250 g

Brand

Aves Studio

Hobby Heaven · By hobbyists, for hobbyists

Sheet 2 / 4

End of sheet

Complete The Job
Brand More from Aves Studio