AK Interactive SHEET 1.0mm thickness x 245 x195mm x2units STYRENE AK6576

Name: AK Interactive SHEET 1.0mm thickness x 245 x195mm x2units STYRENE AK6576
Brand: AK Interactive
SKU: AK6576
Price: 6.41 AUD
Availability: InStock

$6.41

Taxes included. Shipping calculated at checkout.

In stock · same-day dispatch before 3pm

Store rating 4.9/5 · 2180 reviews
UK tracked delivery

Sheet

DWG · Product Information

PROJ: AK6576 · SHEET 2 / 4

View · Overview

Product overview

AK6576 provides two sheets of 1 mm styrene in a 245 × 195 mm format. The full millimetre section suits bases, bulkheads, walls, box structures and substantial architectural panels. Draw a cutting plan onto the sheet first to arrange larger pieces alongside narrow strips and smaller details. Several controlled passes with a modelling knife are preferable to forcing one deep cut, and exposed edges can be filed or sanded after the section has been separated.

AK describes the sheet as plain, white and opaque
Published conversion: .040 in thick × 9.64 in × 7.68 in
The cut panels bond with regular polystyrene cement

Notes · Q & A

What do the dimensions mean?

The first figures describe the cross-section, followed by the stock length or sheet format. Strip is listed as thickness × width × length, round stock uses outside diameter × length, and sheet uses thickness × 245 × 195 mm. The 0.7 mm wall applies only to products explicitly described as hollow tube.

How should I cut modelling styrene?

Score thin sheet and flat strip against a metal straightedge, then snap it along the cut. For thicker sheet and larger profiles, use repeated knife passes or a fine razor saw rather than forcing one deep cut. Clean the edge afterwards with a fine file or abrasive.

What glue should I use for styrene stock?

Ordinary plastic or solvent cement is the usual choice because it softens the mating surfaces and welds the polystyrene together. Test-fit the pieces first and apply the cement sparingly, especially around fine details or exposed surfaces.

How do I choose a thickness or profile?

Choose according to the shape you need and how you intend to cut or form it. Thin sheet and strip are easier to score, snap and curve by hand, while thicker sections usually need repeated knife passes or a fine saw. Rod, tube, angle, channel and half-round profiles provide ready-made cross-sections for particular details.

Does AK styrene need special preparation before painting?

No special paint system is required; treat it like an ordinary polystyrene kit part. Remove cutting and sanding dust, apply primer where appropriate, and use your usual modelling paints.

Notes · Logistics

Shipping

Orders placed before 3pm (Mon–Fri) are dispatched the same day. UK delivery is by Royal Mail 24 Tracked. Free UK delivery on orders over £70. International delivery available via Royal Mail International Tracked or courier.

Returns

If you're not happy with your purchase, contact us within 30 days for a full refund or exchange. Items must be unused and in original packaging.

Table · Specification