AK Interactive Styrene Half Cane 3.0mm x 350mm, 3 pcs (AK6553)

Name: AK Interactive Styrene Half Cane 3.0mm x 350mm, 3 pcs (AK6553)
Brand: AK Interactive
SKU: AK6553
Price: 5.76 AUD
Availability: InStock

$5.76

Taxes included. Shipping calculated at checkout.

In stock · same-day dispatch before 3pm

Store rating 4.9/5 · 2180 reviews
UK tracked delivery

DWG · Product Information

PROJ: AK6553 · SHEET 2 / 4

View · Overview

Product overview

For projects that call for a 3.0 mm-wide half-round detail, AK6553 supplies white, opaque polystyrene with one flat face and one domed face. The 350 mm lengths can be trimmed into shorter components for scratch-built ribs, piping or raised trim. Because the underside is flat, the profile can sit directly against a model surface.

Three lengths are included.
The specification card converts the size to 0.118 × 13.78 inches.
Solvent-type plastic cement will bond the polystyrene.
Primer and model paint can be applied as they would be to a styrene kit part.

Notes · Q & A

What do the dimensions mean?

The first figures describe the cross-section, followed by the stock length or sheet format. Strip is listed as thickness × width × length, round stock uses outside diameter × length, and sheet uses thickness × 245 × 195 mm. The 0.7 mm wall applies only to products explicitly described as hollow tube.

How should I cut modelling styrene?

Score thin sheet and flat strip against a metal straightedge, then snap it along the cut. For thicker sheet and larger profiles, use repeated knife passes or a fine razor saw rather than forcing one deep cut. Clean the edge afterwards with a fine file or abrasive.

What glue should I use for styrene stock?

Ordinary plastic or solvent cement is the usual choice because it softens the mating surfaces and welds the polystyrene together. Test-fit the pieces first and apply the cement sparingly, especially around fine details or exposed surfaces.

How do I choose a thickness or profile?

Choose according to the shape you need and how you intend to cut or form it. Thin sheet and strip are easier to score, snap and curve by hand, while thicker sections usually need repeated knife passes or a fine saw. Rod, tube, angle, channel and half-round profiles provide ready-made cross-sections for particular details.

Does AK styrene need special preparation before painting?

No special paint system is required; treat it like an ordinary polystyrene kit part. Remove cutting and sanding dust, apply primer where appropriate, and use your usual modelling paints.

Notes · Logistics

Shipping

Orders placed before 3pm (Mon–Fri) are dispatched the same day. UK delivery is by Royal Mail 24 Tracked. Free UK delivery on orders over £70. International delivery available via Royal Mail International Tracked or courier.

Returns

If you're not happy with your purchase, contact us within 30 days for a full refund or exchange. Items must be unused and in original packaging.

Table · Specification