Model IWS-6042 | Compression-Fit Design | Silver Alloy | Original Equipment ๐ช HOBBY HEAVEN - Authentic Art Supplies with Expert Support
โ ๏ธ ECLIPSE SERIES ONLY โ ๏ธ
Verify your Eclipse model before ordering - check compatibility list below
๐ What You're Getting
This is an original Iwata replacement nozzle for Eclipse series airbrushes. Features compression-fit design (no threading), made from silver alloy with brass base. 0.35mm diameter provides versatile performance from detail work to broader coverage.
Size:0.35mm diameter - versatile for detail and coverage work
Design:Compression-fit - no threading to strip or overtighten
Material:Silver alloy with brass base - chemical resistant and durable
๐ฏ Compatible Eclipse Models
โ Direct Fit:
Eclipse BS
Eclipse CS
Eclipse SBS
Takumi Eclipse Side Feed
Vault Kustom CS
โ ๏ธ Requires Additional Parts:
Eclipse BCS
BCS Conversion Sets
Needs E3 needle + E3 needle cap
โ Will NOT Fit:
Revolution series
NEO series
HP/Custom series
Non-Eclipse models
๐ Nozzle Specifications
Part Number
IWS-6042
Nozzle Diameter
0.35mm
Mounting Type
Compression-Fit (no threading)
Material
Silver alloy with brass base
Series Compatibility
Eclipse BS/CS/SBS/Takumi/Vault Kustom
Chemical Resistance
Excellent (silver alloy)
Line Capability
Fine detail to medium coverage
Type
Original Equipment Replacement
โก Compression-Fit Advantages
๐ง
No Thread Damage
Can't strip threads or overtighten. Simply press in and remove when needed.
๐งผ
Easy Maintenance
Quick removal for thorough cleaning. No special tools required for basic maintenance.
๐
Consistent Sealing
Reliable seal every time without guessing about tightness. Proper fit or it doesn't go in.
โณ
Longer Life
No wear from threading/unthreading. Nozzle lasts longer with proper care.
๐จ Signs You Need a New Nozzle
๐จ
Spray Issues
Irregular patterns, spitting, or inability to achieve fine lines consistently
๐
Physical Damage
Visible dents, chips, or deformation in the nozzle opening or rim
๐ง
Seal Problems
Air or paint leaks around nozzle area, loss of compression fit
๐
Preventive Replacement
Keep spare on hand - nozzles are precision parts that wear with use
๐ง Installation & Care Guide
๐งInstallation:
Remove old nozzle carefully
Clean nozzle seat thoroughly
Press new nozzle firmly into place
Check for proper seating
๐งผDaily Care:
Clean after each session
Don't let paint dry in nozzle
Use appropriate solvents
Check for clogs regularly
๐ฌDeep Cleaning:
Remove for thorough cleaning
Soak in appropriate cleaner
Use soft brush if needed
Inspect for damage
๐ก๏ธProtection:
Handle carefully - precision part
Store safely when removed
Avoid dropping or impacts
Don't force if resistance felt
๐ฌ Straight Answers About Eclipse Nozzles
๐ค How do I know if this fits my Eclipse?
Check your model number. This E3 nozzle fits BS, CS, SBS, Takumi Side Feed, and Vault Kustom CS directly. For BCS models, you also need E3 needle and needle cap.
๐ง What's special about compression-fit?
No threads to strip or overtighten. Just press in firmly and it seals. Much easier maintenance and longer nozzle life since there's no threading wear.
โฐ How often do nozzles need replacing?
With good care, 1-3 years for most users. Heavy use, poor cleaning, or accidents can require more frequent replacement. Keep a spare - they're precision parts.
๐ Will this fix spray problems?
Only if the nozzle is damaged. Won't fix needle issues, paint consistency problems, air pressure issues, or technique problems. Check the nozzle condition first.
๐ง Is installation difficult?
Very easy with compression-fit design. Remove old nozzle, clean area, press new one in firmly. If it doesn't seat easily, don't force it - check alignment.
๐งผ Can I clean a damaged nozzle?
Cleaning helps with clogs, but physical damage (dents, chips) usually means replacement. Even tiny damage affects spray quality significantly.
๐ What about generic nozzles?
Genuine Iwata nozzles have precise tolerances and material specifications. Generic ones might work but quality and fit vary. For precision work, genuine parts are worth it.
๐ฆ Should I buy multiple nozzles?
One spare is smart for continuity. Multiple nozzles aren't usually necessary unless you want dedicated setups for different paint types or frequently damage them.
๐ Why Buy From Hobby Heaven
โ Genuine Iwata nozzle with proper packaging
๐Same-day dispatch on orders before 2PM weekdays
๐ฌTechnical support for installation questions
๐งStock other Eclipse parts maintenance parts
๐Clear compatibility info prevents wrong orders
Restore Your Eclipse Performance
Compression-fit convenience | Same-day dispatch | Expert support
HOBBY HEAVEN Authentic supplies, honest advice, reliable service
What nozzle size do I need for miniatures?
0.3mm is the versatile all-rounder for base coats and priming; 0.2mm suits fine detail work. Larger nozzles (0.5mm) are for terrain and big surfaces.
Do I need a compressor with a tank?
A tank smooths the airflow and reduces pulsing, giving more consistent results โ worth it if you spray regularly, but tankless compressors work fine for occasional use.
How do I keep an airbrush working well?
Flush with airbrush cleaner between colours and strip-clean after each session. Most spraying problems are cleaning problems.
Shipping
Orders placed before 3pm (MonโFri) are dispatched the same day. UK delivery is by Royal Mail 24 Tracked. Free UK delivery on orders over ยฃ70. International delivery available via Royal Mail International Tracked or courier.
Returns
If you're not happy with your purchase, contact us within 30 days for a full refund or exchange. Items must be unused and in original packaging.
