Hobby Heaven Zephyr 0.3 dual-action airbrush in polished chrome with the 7 ml gravity cup fitted

Hobby Heaven Zephyr 0.3 Airbrush (HHA-1001) – 0.3mm Gravity-Feed Dual-Action, 7ml Cup

$32.61
$32.61
Skip to product information
Hobby Heaven Zephyr 0.3 dual-action airbrush in polished chrome with the 7 ml gravity cup fitted
  • Hobby Heaven Zephyr 0.3 dual-action airbrush in polished chrome with the 7 ml gravity cup fitted
  • Zephyr 0.3 airbrush in front of its black Hobby Heaven presentation box
  • Zephyr 0.3 airbrush callouts: 0.3 mm needle and nozzle, 7 ml cup with lid and 1/8in BSP air fitting
  • Zephyr 0.3 box contents: airbrush, spare 0.3 mm needle, wrench, quick-release adapters and quick start guide
  • Zephyr 0.3 dual-action lever: press down for air, pull back for paint; rear knob sets the travel limit
  • Hobby Heaven Zephyr 0.3 Airbrush (HHA-1001) – 0.3mm Gravity-Feed Dual-Action, 7ml Cup
  • Zephyr 0.3 exploded parts diagram showing nozzle, caps, needle, valve, O-rings, handle and fluid cup
  • Close-up of the Zephyr 0.3 7 ml cup with lid, cutaway handle and rear travel limiter knob
  • Zephyr 0.3 HHA-1001 technical data: dual-action, gravity feed, 0.3 mm nozzle, PTFE seals, 15-40 PSI
  • HHP-1001 black elastic masking putty, 80 g tin, included free with every Zephyr 0.3 order
  • Zephyr 0.3 airbrush shown with its original Hobby Heaven retail box
Hobby Heaven Zephyr 0.3 Airbrush (HHA-1001) – 0.3mm Gravity-Feed Dual-Action, 7ml Cup
Hobby Heaven

Hobby Heaven Zephyr 0.3 Airbrush (HHA-1001) – 0.3mm Gravity-Feed Dual-Action, 7ml Cup

$32.61
$32.61
Shipping calculated at checkout.

In stock · same-day dispatch before 3pm

  • Store rating 4.9/5 · 2216 reviews
  • UK tracked delivery
  • Dual Action
  • Gravity Feed
  • Unit
  • 0.3mm

DWG · Product Information

PROJ: HHA-1001 · SHEET 2 / 4

View · Overview

Product overview

Zephyr 0.3, the first airbrush to bear the Hobby Heaven name, is a top-lever, dual-action, gravity-feed design with a matched 0.3 mm needle and nozzle. Most beginner guides to miniature and scale-model painting favour this configuration, which stays useful well beyond the basics. 0.3 mm is the all-round size; 0.2 mm eases the finest freehand lines, while 0.5 mm speeds up thick primer and varnish. A rear travel limiter and a dedicated HHA number for every wear part make it a tool to tune and maintain, not replace.

  • 1/8″ BSP male air inlet; quick-release coupler and plug included.
  • The rear knob caps lever travel, not air pressure; set that at your compressor regulator, within 15–40 PSI.
  • Screw-in nozzle: refit it with the supplied wrench, hand-tight plus a slight nudge; overtightening cracks it.
  • Strip the front end for cleaning, keeping solvent and ultrasonic baths away from the air valve. Never mix in needles or nozzles from another airbrush.
  • Still needed: a compressor with a regulator, a hose with a 1/8″ BSP airbrush end, paint and cleaner.
  • Every order adds a free 80 g tin of our black HHP-1001 elastic masking putty, outside the boxed kit, for masking or soft-edged camouflage strands.

Notes · Q & A

What nozzle size do I need for miniatures?

0.3mm is the versatile all-rounder for base coats and priming; 0.2mm suits fine detail work. Larger nozzles (0.5mm) are for terrain and big surfaces.

Do I need a compressor with a tank?

A tank smooths the airflow and reduces pulsing, giving more consistent results — worth it if you spray regularly, but tankless compressors work fine for occasional use.

How do I keep an airbrush working well?

Flush with airbrush cleaner between colours and strip-clean after each session. Most spraying problems are cleaning problems.

Notes · Logistics

Shipping

Orders placed before 3pm (Mon–Fri) are dispatched the same day. UK delivery is by Royal Mail 24 Tracked. Free UK delivery on orders over £70. International delivery available via Royal Mail International Tracked or courier.

Returns

If you're not happy with your purchase, contact us within 30 days for a full refund or exchange. Items must be unused and in original packaging.

Table · Specification

Technical specifications

Product details
Brand
Hobby Heaven
Product code
HHA-1001
Type
Airbrush
Shipping weight
450 g
Barcode
5061001183128
Made in
China
Dimensions & contents
Cup capacity
7 ml
In the box
0.3 mm needle (spare), Wrench, 1/8" BSP quick-disconnect female adapter, Airbrush quick-release male adapter, Quick start guide
Usage & compatibility
Action
Dual-action
Nozzle size
0.3 mm
Needle size
0.3 mm
Feed type
Gravity
Working pressure
15-40 psi

Product

Hobby Heaven Zephyr 0.3 Airbrush (HHA-1001) – 0.3mm Gravity-Feed Dual-Action, 7ml Cup

Code (proj)

HHA-1001

Ship. weight

450 g

Brand

Hobby Heaven

Hobby Heaven · By hobbyists, for hobbyists

Sheet 2 / 4

End of sheet

Complete The Job
Brand More from Hobby Heaven