Green Stuff World – Cement Glue for Plastics 40 ml
Green Stuff World – Cement Glue for Plastics 40 ml
- Same-day dispatch before 3pm
- Store rating 4.9/5 · 2126 reviews
- UK tracked delivery
Product Information
🔗 Plastic Cement – Chemical Weld, Not Just Glue
Melts plastic surfaces together into one solid piece. No glue layer. Invisible bonds. Sandable joints.
📦 What You Get
40ml glass bottle with brush applicator – a thin, liquid plastic cement that chemically softens plastic surfaces and fuses them together when pressed. Not a traditional adhesive that sits between parts – this creates a true weld where the plastic becomes one piece. The fine brush tip lets you apply precisely into seams and joints.
⚡ How It Works
💡 Result: seamless bond you can sand, file, and scribe like solid plastic.
✓ Works With / ✗ Doesn't Work With
✅ Yes – Plastics
- Polystyrene (PS) – model kits
- HIPS – high-impact polystyrene
- ABS – common hobby plastic
- Plasticard / sheet styrene
- Sprue parts, kit components
❌ No – Other Materials
- Resin – use CA/super glue
- Metal – use CA or epoxy
- Wood – use PVA or CA
- PE/PP soft plastics
- 3D printed resin parts
🎯 What's It Good For?
🛡️ Plastic Model Kits
- Tanks, aircraft, vehicles
- Buildings and terrain
- Hard plastic miniatures
- Invisible seam lines
⚔️ Conversions & Kitbash
- Joining parts from different kits
- Plasticard scratchbuilds
- Adding custom details
- Bonds stronger than original
🔧 Seam Removal
- Fuse halves seamlessly
- Sand joint like solid plastic
- Rescribe panel lines over joint
- No filler needed on good fit
🎨 Clean Finish Work
- No white residue like CA
- No thick glue blobs
- Primes and paints smoothly
- Professional results
📋 Specifications
| Volume | 40ml |
| Type | Plastic cement (solvent weld) |
| Consistency | Thin liquid, clear |
| Container | Glass bottle + brush applicator |
| Initial grab | 10-30 seconds |
| Full cure | Several minutes (varies by amount) |
| Works on | PS, HIPS, ABS, plasticard |
| Manufacturer | Green Stuff World (Spain) |
💡 Pro Tips
- Degrease first – wipe parts with isopropyl alcohol for best bond
- Less is more – thin coat works better than flooding the joint
- Press firmly – hold parts together while cement sets
- Wipe excess fast – remove any squeeze-out before it dries
- Lightly sand mating surfaces for extra grip on smooth parts
✅ Pros
- True weld – parts become one piece
- Invisible joints when done right
- Sandable, scribable bond
- No white residue
- Precision brush applicator
- Glass bottle – solvent safe
⚠️ Keep in Mind
- Plastics only – not for resin/metal
- Strong solvent smell – ventilate
- Can damage paint if spilled
- Parts must be held while setting
⚠️ Safety: Use in well-ventilated area. Solvent-based – do not inhale fumes. Keep away from eyes and skin. Cap tightly after use. Keep away from children. Flammable.
🏪 Hobby Heaven – Authorised Green Stuff World Dealer UK
Which glue should I use for plastic, resin or metal?
Plastic cement welds polystyrene kits; resin and metal don't react to cement, so use super glue (CA). PVA is for basing materials only.
Green Stuff or Milliput — which putty?
Green Stuff stays slightly flexible and holds fine sculpted detail; Milliput cures rock-hard and sands smooth, ideal for gap filling. Many modellers mix the two.
How long does epoxy putty take to cure?
Workable for roughly 60–90 minutes, fully cured in about 24 hours at room temperature — check each product's description for exact times.
Shipping
Returns