{"product_id":"hobby-heaven-braided-airbrush-hose-1-8m-hha-5201","title":"Hobby Heaven Braided Airbrush Hose 1.8m (HHA-5201) – 1\/8\" BSP Both Ends","description":"\u003cp\u003eHHA-5201 is a 1.8 m air hose for linking an airbrush to its compressor. A knurled nut threaded 1\/8\" BSP female sits on each end, the size most hobby airbrushes and compressor regulators use for their air connections, and both nuts are done up with the fingers alone. A black braided sleeve covers the full length. That length suits a compressor standing on the desk or on a shelf close behind it, and it matches the hose packed with many compressor kits, which makes this a straight swap when an old one starts leaking or goes missing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1.8 m long, about 6 ft\u003c\/li\u003e\n\u003cli\u003eIdentical nut at both ends, 1\/8\" BSP female, so it goes on either way round\u003c\/li\u003e\n\u003cli\u003eBlack braided outer cover from nut to nut\u003c\/li\u003e\n\u003cli\u003eConnects directly to the Hobby Heaven Zephyr and other airbrushes with a 1\/8\" BSP male inlet\u003c\/li\u003e\n\u003cli\u003ePacked in a Hobby Heaven bag labelled HHA-5201 with its barcode\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it connects to\u003c\/h3\u003e\n\u003cp\u003eAirbrushes from Iwata, Harder \u0026amp; Steenbeck, Sparmax, Grex or Master fit straight on, as the Zephyr does; for Badger, Paasche or Aztek, add that brand's adapter. Bigger compressors often have a 1\/4\" BSP outlet, which calls for a reducer such as the one in HHA-5401, and US-made machines may use 1\/4\" NPT, a different thread entirely. For click-on connections, fit a quick-disconnect coupler (HHA-5103 or HHA-5104) to the hose. For more reach, the 3 m hose is HHA-5202.\u003c\/p\u003e\n\u003ch3\u003eHose, or something else?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSymptom\u003c\/th\u003e\n\u003cth\u003eLikely cause and remedy\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHissing at one end\u003c\/td\u003e\n\u003ctd\u003eThe joint, not the hose: reseat the nut; if that fails, tape the male thread\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNut refuses to start, or tightens after a single turn\u003c\/td\u003e\n\u003ctd\u003eA mismatched thread on the far side: stop and use an adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater spitting at the nozzle\u003c\/td\u003e\n\u003ctd\u003eCondensation: drain the compressor's trap, or add an inline trap (HHA-5301)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAir escaping along the hose itself\u003c\/td\u003e\n\u003ctd\u003eA split, usually after crushing or a hard kink: replace the hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSigns it needs replacing\u003c\/h3\u003e\n\u003cp\u003eLeaks along the length rather than at a nut, a cracked nut or stripped thread, or a section that has been cut, crushed, melted or left permanently flattened.\u003c\/p\u003e\n\u003ch3\u003eFitting and care\u003c\/h3\u003e\n\u003cp\u003eWith the compressor switched off and the line empty, run one nut onto the outlet and the second onto the airbrush or coupler, fingers only; pliers can flatten the knurled grip. Brush soapy water across both joints with the air on: bubbles mark a leak. Store it in loose coils and keep thinners, hot tools and blades away from it.\u003c\/p\u003e\n\u003ch3\u003eWorth knowing\u003c\/h3\u003e\n\u003cp\u003eJoining two hoses takes a 1\/8\" BSP male × male joiner, which HHA-5401 includes, though one longer hose means a joint fewer. This is one of the numbered parts of the Hobby Heaven Zephyr range, which keeps growing; once a number is given, it always means the same part.\u003c\/p\u003e","brand":"Hobby Heaven","offers":[{"title":"Default Title","offer_id":68436814332093,"sku":"HHA-5201","price":4.89,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/hobby-heaven-braided-airbrush-hose-1-8m-hha-5201-2.jpg?v=1795199857","url":"https:\/\/hobbyheaven.org\/products\/hobby-heaven-braided-airbrush-hose-1-8m-hha-5201","provider":"Hobby Heaven","version":"1.0","type":"link"}