{"product_id":"hobby-heaven-airbrush-quick-disconnect-plug-male-hha-5102","title":"Hobby Heaven Airbrush Quick Disconnect Plug, Male (HHA-5102) – 1\/8\" BSP, 5mm Nipple","description":"\u003cp\u003eHHA-5102 is the airbrush half of a quick-disconnect connection: a small plug that is screwed onto the air inlet and then left in place. Its smooth 5 mm nipple slides into a coupler on the hose (HHA-5101) and is held there until the coupler's sleeve is drawn back. The plug has no valve of its own, because the automatic shut-off lives in the coupler; that keeps it small and inexpensive, so most painters leave one on each airbrush they own and keep a single coupler on the hose. It is the same plug that comes in the box with the Hobby Heaven Zephyr.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFemale 1\/8\" BSP thread, to suit an airbrush whose inlet is 1\/8\" BSP\u003c\/li\u003e\n\u003cli\u003eStandard 5 mm nipple for airbrush quick-disconnect couplers\u003c\/li\u003e\n\u003cli\u003eKnurled collar, so it goes on and comes off by hand\u003c\/li\u003e\n\u003cli\u003eNo internal valve: the coupler does the shutting off\u003c\/li\u003e\n\u003cli\u003eSingle plug, Hobby Heaven blister, HHA-5102 on the label; coupler sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePlug, or something else?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSymptom\u003c\/th\u003e\n\u003cth\u003eWhat to check\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHissing at the airbrush joint\u003c\/td\u003e\n\u003ctd\u003eInlet thread unsealed: unscrew, wind a little thread-sealing tape onto the airbrush's inlet and refit by hand\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHissing where it clicks in\u003c\/td\u003e\n\u003ctd\u003ePush the plug fully home; if a clean, undamaged nipple still hisses, suspect the coupler's seal (HHA-5101)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWill not click into a coupler you already own\u003c\/td\u003e\n\u003ctd\u003eThat coupler may not be a 5 mm system; pair the plug with our coupler instead\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWill not start on the airbrush\u003c\/td\u003e\n\u003ctd\u003eThe inlet is a different fitting: Badger, Paasche and Aztek airbrushes each want their own brand adapter first\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNipple dented, scored or bent\u003c\/td\u003e\n\u003ctd\u003eReplace the plug, since a damaged nipple cannot seal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSigns it needs replacing\u003c\/h3\u003e\n\u003cp\u003eA nipple nicked, scored or bent after a drop, a thread that has crossed or no longer pulls up snug, or a plug that keeps leaking at a coupler which seals perfectly with another plug.\u003c\/p\u003e\n\u003ch3\u003eFitting\u003c\/h3\u003e\n\u003cp\u003eWith the air off, unscrew the hose or the old plug from the airbrush. Tape the airbrush's inlet thread, since the plug's own thread is on the inside, and turn the plug on by hand until it seats; no tools are needed. Wipe the nipple before every connection, because grit carried into the coupler wears its seal.\u003c\/p\u003e\n\u003ch3\u003eWorth knowing\u003c\/h3\u003e\n\u003cp\u003eCounting is simple: a plug for every airbrush, a coupler for every hose, so a single compressor running three airbrushes calls for three plugs but just one coupler. Iwata, Harder \u0026amp; Steenbeck, Sparmax, Grex, Master and the Zephyr all use a 1\/8\" BSP male inlet, which is what this plug is made for, and it clicks into our plain coupler HHA-5101 as well as the valved set HHA-5104. Want both halves at once? The pair is sold as HHA-5103. This is one of the numbered parts of the Hobby Heaven Zephyr range, which keeps growing; once a number is given, it always means the same part.\u003c\/p\u003e","brand":"Hobby Heaven","offers":[{"title":"Default Title","offer_id":68436813906109,"sku":"HHA-5102","price":2.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/hobby-heaven-airbrush-quick-disconnect-plug-male-hha-5102-2.jpg?v=1795199957","url":"https:\/\/hobbyheaven.org\/en-us\/products\/hobby-heaven-airbrush-quick-disconnect-plug-male-hha-5102","provider":"Hobby Heaven","version":"1.0","type":"link"}