{"product_id":"hobby-heaven-zephyr-0-3mm-needle-nozzle-set-hha-2001","title":"Hobby Heaven Zephyr 0.3mm Needle \u0026 Nozzle Set (HHA-2001) – Matched Needle, Nozzle and Caps","description":"\u003cp\u003eHHA-2001 puts the complete 0.3 mm front end of the Hobby Heaven Zephyr in one box: a needle, a nozzle with its rubber O-ring, the nozzle cap and the needle cap, all in the size the airbrush is built around. Every Zephyr part carries its own HHA number, so when a tip bends or a nozzle cracks you can reorder exactly this set instead of hunting for a generic needle that may never seat. Changing all four together restores the matched pairing, and the Zephyr system keeps growing under the same numbering.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFour parts, one of each, every one of them 0.3 mm\u003c\/li\u003e\n\u003cli\u003eNozzle cap with an external thread, needle cap with an internal one; both have knurled rims for grip\u003c\/li\u003e\n\u003cli\u003eRubber O-ring already fitted to the nozzle\u003c\/li\u003e\n\u003cli\u003ePadded tube for the needle, padded container for the small parts, both set into EVA foam\u003c\/li\u003e\n\u003cli\u003eMade for the Zephyr; we do not claim a fit on any other airbrush\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIs it really the needle and nozzle?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eWhat you notice\u003c\/th\u003e\n\u003cth\u003eLikely reason\u003c\/th\u003e\n\u003cth\u003eTry first\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpray drifts sideways or spits\u003c\/td\u003e\n\u003ctd\u003eBent needle tip or a damaged nozzle\u003c\/td\u003e\n\u003ctd\u003eLook for dried paint at the tip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePaint still comes out with the lever all the way forward\u003c\/td\u003e\n\u003ctd\u003eThe needle has stopped closing in the nozzle\u003c\/td\u003e\n\u003ctd\u003eClean the nozzle bore, then inspect the tip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBubbles rise in the cup while you spray\u003c\/td\u003e\n\u003ctd\u003eAir leaking back because the nozzle is loose or worn\u003c\/td\u003e\n\u003ctd\u003eSnug the nozzle gently, check the O-ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle tip visibly cracked or chipped\u003c\/td\u003e\n\u003ctd\u003eOvertightening, or the needle forced into it\u003c\/td\u003e\n\u003ctd\u003eNone: a split nozzle cannot be repaired\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA cap is lost or its thread stripped\u003c\/td\u003e\n\u003ctd\u003eA drop or general wear\u003c\/td\u003e\n\u003ctd\u003eFit new caps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eDried paint causes most of these symptoms too, so strip and clean first. If the fault survives a proper clean, the parts are worn out.\u003c\/p\u003e\n\u003ch3\u003eFitting the set\u003c\/h3\u003e\n\u003cp\u003eDisconnect the air before you start. Take the handle off, loosen the needle chucking nut, unscrew the nozzle and draw the old needle out through the front. Refit in this order: the new needle in from the front, then the nozzle, screwed in by hand and given only a slight nudge with the wrench, since overtightening splits it. Add both caps, ease the needle forward until it just touches its seat, tighten the chucking nut and put the handle back. No wrench in this box: the Zephyr ships with one, and HHA-7101 is that wrench on its own.\u003c\/p\u003e\n\u003ch3\u003eWorth knowing\u003c\/h3\u003e\n\u003cp\u003eOnly the needle damaged? The Zephyr's own box carries one extra 0.3 mm needle. Reach for this set when the nozzle or a cap has worn as well. The needle cap is the open crown at the front that guards the needle tip; you can take it off for very close work. Never mix sizes: pushing the 0.5 mm needle into this smaller nozzle ruins the spray and risks damaging both; convert with the HHA-2002 set instead.\u003c\/p\u003e","brand":"Hobby Heaven","offers":[{"title":"Default Title","offer_id":68436811317437,"sku":"HHA-2001","price":8.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/hobby-heaven-zephyr-0-3mm-needle-nozzle-set-hha-2001-1.jpg?v=1795190744","url":"https:\/\/hobbyheaven.org\/en-int\/products\/hobby-heaven-zephyr-0-3mm-needle-nozzle-set-hha-2001","provider":"Hobby Heaven","version":"1.0","type":"link"}