Aves Apoxie Sculpt Natural 1 lb: open Part A jar labelled Net Weight 8 oz. (227 g) beside a grey sculpted head

Aves Apoxie Sculpt 454g (1lb) Natural — Two-Part Epoxy Modelling Compound

$28.37
$28.37
Skip to product information
Aves Apoxie Sculpt Natural 1 lb: open Part A jar labelled Net Weight 8 oz. (227 g) beside a grey sculpted head
  • Aves Apoxie Sculpt Natural 1 lb: open Part A jar labelled Net Weight 8 oz. (227 g) beside a grey sculpted head
  • Feature graphic with two stacked Apoxie tubs listing self-hardening, waterproof and zero-shrinkage properties
  • Aves Studio Apoxie Sculpt two part epoxy compound showing black Part B and grey Part A ready to sculpt
  • Three-step guide: measure equal parts from two jars, knead for two minutes to a uniform colour, then shape and smooth
  • Four uses in one graphic: sculpting a bust, converting a miniature, repairing a cracked vase and building terrain
  • Sculpted eagle in cured epoxy beside Apoxie Sculpt tubs, with an inset of a wing being sanded smooth
  • Apoxie Sculpt colour chart: twelve Part A colours as swatches beside a Part A jar and a Part B jar
  • Finished work: a runed bracer prop, a sculpted fairy being detailed with a tool, and a mossy ruin diorama
  • Service panel: UK stock shipped from Derby, same-day dispatch before 3pm, VAT included, direct from Aves USA
  • Size guide comparing the quarter-pound, one-pound and four-pound Apoxie Sculpt tubs, which are sold separately
  • Range graphic of Aves tubs and bottles: Apoxie Sculpt, Apoxie Clay, Apoxie Paste, FIXIT Paste and Finishing Solution
  • Aves Studio Apoxie Sculpt key features including self hardening waterproof durable finish and no drying out before mixing
  • Aves Studio Apoxie Sculpt hand packed and inspected jars showing Part A and Part B modelling compound
  • Aves Studio Apoxie Sculpt Part A and Part B jars with one jar open to show the modelling compound inside
  • Aves Studio Apoxie Sculpt Natural showing Part A and Part B with guidance that both parts look similar before mixing
Aves Apoxie Sculpt 454g (1lb) Natural — Two-Part Epoxy Modelling Compound
Aves Studio

Aves Apoxie Sculpt 454g (1lb) Natural — Two-Part Epoxy Modelling Compound

1 reviews

$28.37
$28.37
Shipping calculated at checkout.

In stock · same-day dispatch before 3pm

  • Store rating 4.9/5 · 2170 reviews
  • UK tracked delivery

DWG · Product Information

PROJ: AS1NAT · SHEET 2 / 4

View · Overview

Product overview

The 1 lb Natural presentation is a regular working quantity for models, seam filling, prototypes and restoration jobs. Separate 8 oz jars hold Parts A and B until only the amount needed is prepared. There is a 1–3-hour window for tooling the putty-like mixture, and it self-hardens without an oven. Both Natural components look alike and do not change colour during mixing, so a visual uniformity check is unavailable: knead for the full two minutes by the clock and expect a little warmth as activation begins.

  • Combine equal portions of A and B for the specified 50/50 mix.
  • Give the prepared compound five minutes to rest for more manageable handling.
  • Do not sand or drill until the no-bake material has reached its complete 24-hour cure.
  • The maker states that it cures hard and waterproof with 0% shrinkage.

Notes · Q & A

What's the difference between Green Stuff and Milliput-type putties?

Green Stuff is flexible and springy, holding fine sculpted detail like cloth and cabling. Milliput-type putties are harder-setting and sand smooth once cured, which makes them better for gap-filling and surfaces you want to blend flat. Many sculptors mix the two.

How do I stop epoxy putty sticking to my tools and fingers?

Keep a little water on the tool and your fingertips as a release; the putty won't grab a wet surface. Work in good light and let very tacky putty firm up for a few minutes before shaping fine detail.

How do I get the mixing ratio right?

Most epoxy putties cure at a 1:1 mix of the two parts by volume, kneaded until the colour is fully even with no streaks. Under-mixing leaves soft patches that never fully harden, so mix longer than feels necessary.

How do I fill a seam gap cleanly without losing nearby detail?

Press a small amount of putty into the gap, then wipe the excess back with a wet tool or a cotton bud before it cures, leaving putty only in the recess. Cleaning up wet saves sanding over detail later.

Notes · Logistics

Shipping

Orders placed before 3pm (Mon–Fri) are dispatched the same day. UK delivery is by Royal Mail 24 Tracked. Free UK delivery on orders over £70. International delivery available via Royal Mail International Tracked or courier.

Returns

If you're not happy with your purchase, contact us within 30 days for a full refund or exchange. Items must be unused and in original packaging.

Table · Specification

Technical specifications

Product details
Brand
Aves Studio
Product code
AS1NAT
Type
Epoxy Putty
Shipping weight
590 g
Colour
Natural
Composition & curing
Chemistry
Two-part epoxy modelling compound (resin + catalyst, mixed 50:50 by weight)
Hardness
Hard
Working time
180 min
Full cure
24 h
Heat resistance
163 °C
Dimensions & contents
Net weight
454 g
Usage & compatibility
Bonds
Ceramic, Metal, Wood, Stone, Glass, Plastic, Polymer, Foam, Fibreglass, Epoxy
Safety & compliance
Signal word
Warning
Hazards
H317 May cause an allergic skin reaction, H320 Causes eye irritation

Product

Aves Apoxie Sculpt 454g (1lb) Natural — Two-Part Epoxy Modelling Compound

Code (proj)

AS1NAT

Ship. weight

590 g

Brand

Aves Studio

Hobby Heaven · By hobbyists, for hobbyists

Sheet 2 / 4

End of sheet
  • 5 stars: 1 (100%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
A
Anonymous
A great product for sculpting

A great product for sculpting, never any cracks, resilient and waterproof!

Complete The Job
Brand More from Aves Studio