{"product_id":"hobby-heaven-zephyr-0-5mm-needle-nozzle-set-hha-2002","title":"Hobby Heaven Zephyr 0.5mm Needle \u0026 Nozzle Set (HHA-2002) – 0.5mm Conversion Kit","description":"\u003cp\u003eHHA-2002 turns the Hobby Heaven Zephyr from its stock 0.3 mm into a 0.5 mm airbrush. Inside are the four parts that must change as one: needle and nozzle in 0.5 mm, the nozzle carrying a rubber O-ring, plus the nozzle cap and needle cap made for that size. The opening in the cap must suit the nozzle for the air to wrap around the paint properly, which is why both caps are part of the set. Already using 0.5 mm on your Zephyr? Then the set doubles as the replacement for worn parts.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOne airbrush, two sizes: stay on the stock size for detail, switch to this set when a job needs more flow\u003c\/li\u003e\n\u003cli\u003eFour parts, one of each, all 0.5 mm, with the O-ring already on the nozzle\u003c\/li\u003e\n\u003cli\u003eKnurled caps: external thread on the nozzle cap, internal thread on the needle cap\u003c\/li\u003e\n\u003cli\u003ePacked in EVA foam, with a padded tube for the needle and a padded container that later stores the idle set\u003c\/li\u003e\n\u003cli\u003eMade for the Zephyr only, with no claim of fit on other airbrushes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChoosing the size for the job\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eGood for\u003c\/th\u003e\n\u003cth\u003eWhy\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.5 mm (this set)\u003c\/td\u003e\n\u003ctd\u003ePrimer, varnish of any sheen, metallic and colour-shift paints, basecoats on vehicles, big kits and terrain\u003c\/td\u003e\n\u003ctd\u003eThicker paint and metal flakes pass without clogging, and coverage is quicker\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.3 mm (HHA-2001, stock)\u003c\/td\u003e\n\u003ctd\u003eFreehand detail, glazes, fine lines and small figures\u003c\/td\u003e\n\u003ctd\u003eA narrower spray that is easier to control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe label on a paint or primer can settle it: some brands print a minimum nozzle size.\u003c\/p\u003e\n\u003ch3\u003eSwapping between sizes\u003c\/h3\u003e\n\u003cp\u003eShut off the air supply and give the airbrush a clean. With the handle removed and the chucking nut slackened, the nozzle unscrews and the needle slides out of the front. Build the other size up in reverse: needle in from the front, nozzle finger-tight with just a touch more from the wrench (forcing it cracks the nozzle), both caps, then let the needle seat gently before the chucking nut and handle go back. You need the Zephyr wrench, HHA-7101, which is not included here. Put the removed parts straight into this box so the two sizes never end up mixed.\u003c\/p\u003e\n\u003ch3\u003eWorth knowing\u003c\/h3\u003e\n\u003cp\u003eFine detail is not what 0.5 mm is for. Careful lever control still gives a soft line, but fine work is easier back on 0.3 mm with HHA-2001, which is the point of owning both. Swap all four parts at once: the smaller cap over this nozzle, or the larger needle pushed into the smaller nozzle, sprays badly and may ruin the parts. Needle tips bend easily at any size, usually from a fall off the desk or a cloth pulled towards the point, so wipe a needle away from its tip.\u003c\/p\u003e","brand":"Hobby Heaven","offers":[{"title":"Default Title","offer_id":68436811481277,"sku":"HHA-2002","price":12.27,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/hobby-heaven-zephyr-0-5mm-needle-nozzle-set-hha-2002-1.jpg?v=1795190755","url":"https:\/\/hobbyheaven.org\/en-ca\/products\/hobby-heaven-zephyr-0-5mm-needle-nozzle-set-hha-2002","provider":"Hobby Heaven","version":"1.0","type":"link"}