{"title":"Dspiae","description":"\u003cp\u003eDSPIAE make precision tools for scale modellers: single-blade nippers and tweezers for clean-up on the sprue, hand drills and spin-lock bit sets, aluminium alloy and carbon fibre sanding boards, glass mirror polishing files, stainless steel clamps and vises, photo-etched parts benders, and a small range of powered tools.\u003c\/p\u003e","products":[{"product_id":"dspiae-st-a3-0-single-blade-nipper","title":"DSPIAE ST-A3.0 Single Blade Nipper","description":"\u003cp\u003eThe DSPIAE ST-A3.0 is the top-end single-blade nipper in the range, made for removing plastic parts with less crushing at the gate. A flat anvil supports one side while the sharpened blade cuts from the other, producing a flatter cut face and reducing the white stress marks caused by pinching the plastic.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCutting edge hardness reaches 58–64 HRC after multiple heat treatments\u003c\/li\u003e\n\u003cli\u003ePrecision-ground blade is finished to a mirror surface\u003c\/li\u003e\n\u003cli\u003eUse it as a finishing nipper: cut slightly proud of the part, then pare the remaining nub flush\u003c\/li\u003e\n\u003cli\u003eDesigned exclusively for plastic sprues; do not use it on photo-etch, metal parts or wire\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":47993135694013,"sku":"ST-A3.0","price":28.59,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/Hero1_32b67c08-b809-4bf5-b80d-aaea1bb857b4.jpg?v=1786714161"},{"product_id":"dspiae-st-c2-single-blade-nipper","title":"DSPIAE ST-C2 Single Blade Nipper","description":"\u003cp\u003eThe DSPIAE ST-C2 uses the same single-blade cutting principle as the ST-A3.0 in a more accessible tool for straightforward plastic-kit assembly. Its limit adjuster sets the closed position of the jaws, preventing the very thin cutting edge from meeting the opposite metal face.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePVC grips cover both handles for a secure working hold\u003c\/li\u003e\n\u003cli\u003ePin-and-lock-screw limiter lets you set and retain the jaw stop\u003c\/li\u003e\n\u003cli\u003eSpring coil reopens the handles after each cut\u003c\/li\u003e\n\u003cli\u003eElite Series model intended as an entry point to single-blade nippers\u003c\/li\u003e\n\u003cli\u003eFor plastic sprues only; photo-etch, metal and wire can damage the edge\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":47993136185533,"sku":"ST-C2","price":16.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/Hero1_14bef300-4fb1-458b-96b7-12c3efc729af.jpg?v=1786715598"},{"product_id":"dspiae-st-l-ultimate-bladeless-pliers","title":"DSPIAE ST-L Ultimate Bladeless Pliers","description":"\u003cp\u003eThe DSPIAE ST-L bends and folds photo-etched parts; it has no cutting edge and is not a cutter. Its flat faces hold a small section of brass so you can form a defined fold and press it flat without leaving the tooth marks associated with serrated pliers.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrecision-milled jaws are 1 mm wide for reaching short, narrow fold lines\u003c\/li\u003e\n\u003cli\u003eEdgeless gripping faces fold and flatten rather than cutting into the part\u003c\/li\u003e\n\u003cli\u003eFixed stopper limits jaw travel to reduce over-pressing or over-stretching\u003c\/li\u003e\n\u003cli\u003eLow-plasticity carbon steel helps the jaws resist flexing while folding brass sheet or copper wire\u003c\/li\u003e\n\u003cli\u003eErgonomic handles provide controlled pressure during small folds\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":47993136545981,"sku":"ST-L","price":13.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/Hero1_03bb73a6-806d-44d0-80e6-1b43d876b106.jpg?v=1786715632"},{"product_id":"dspiae-xdb-s01-spin-lock-drill-bit-set-01","title":"DSPIAE XDB-S01 Spin-Lock Drill Bit Set 01","description":"\u003cp\u003eThe DSPIAE XDB-S01 covers the fine end of the Mobius drill-bit range, where small changes in diameter matter for rivet holes, grab handles, antenna mounts and photo-etch pins. Its six tungsten bits progress without gaps from 1.0 to 1.5 mm in 0.1 mm steps. Closely spaced choices let you match smaller fittings instead of forcing one hole size across several details.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncluded diameters: 1.0, 1.1, 1.2, 1.3, 1.4 and 1.5 mm.\u003c\/li\u003e\n\u003cli\u003eEvery bit carries a Ø3.175 mm shank — the fitting DSPIAE designed his Mobius hand drill (AT-MHD) to hold.\u003c\/li\u003e\n\u003cli\u003eThe flat spin-lock notch engages the Mobius chuck, stopping the bit turning inside the collet under load.\u003c\/li\u003e\n\u003cli\u003eOur PT-HD 3.175 mm hand drill takes the same shank but does not engage the flat.\u003c\/li\u003e\n\u003cli\u003eA gold case label identifies SPIN-LOCK DRILL BIT 01.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":47993136840893,"sku":"XDB-S01","price":6.29,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/Hero1_7e70c1dd-feb9-46b0-a48b-c43e6023be51.jpg?v=1786715682"},{"product_id":"dspiae-xdb-s02-spin-lock-drill-bit-set-02","title":"DSPIAE XDB-S02 Spin-Lock Drill Bit Set 02","description":"\u003cp\u003eThe DSPIAE XDB-S02 occupies the middle of the three-set size ladder. Six tungsten bits cover pinning joints, drilling out model gun barrels and general assembly work on 1\/35 to 1\/48 scale kits. Continuous 0.1 mm increments from 1.5 through 2.0 mm give you closely graded choices around these medium drilling diameters.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe set contains 1.5, 1.6, 1.7, 1.8, 1.9 and 2.0 mm bits.\u003c\/li\u003e\n\u003cli\u003eA Ø3.175 mm shank matches the chuck of the Mobius hand drill, DSPIAE's AT-MHD.\u003c\/li\u003e\n\u003cli\u003eInside a Mobius collet, the flattened locking section prevents rotation when the drill meets resistance.\u003c\/li\u003e\n\u003cli\u003eThe PT-HD general purpose hand drill we stock holds this shank, without spin-lock engagement.\u003c\/li\u003e\n\u003cli\u003eThe silver insert reads SPIN-LOCK DRILL BIT 02.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":47993137201341,"sku":"XDB-S02","price":6.29,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/Hero1_74b1a52e-7b5f-4a6e-a28d-3f9510481720.jpg?v=1786715732"},{"product_id":"dspiae-xdb-s03-spin-lock-drill-bit-set-03","title":"DSPIAE XDB-S03 Spin-Lock Drill Bit Set 03","description":"\u003cp\u003eThe DSPIAE XDB-S03 handles the large end of the range: pinning heavier parts, forming magnet recesses and drilling through thicker model materials. Its six tungsten bits are arranged as three close pairs separated by larger gaps, rather than continuous 0.1 mm increments. This layout gives you paired choices around three larger diameters without implying that the sizes between them are included.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIndividual diameters are 2.0, 2.1, 2.5, 2.6, 3.0 and 3.1 mm.\u003c\/li\u003e\n\u003cli\u003eThe set omits 2.2–2.4 mm and 2.7–2.9 mm sizes.\u003c\/li\u003e\n\u003cli\u003eAll six share the Ø3.175 mm shank that the Mobius (AT-MHD) is built to take.\u003c\/li\u003e\n\u003cli\u003eOnly the Mobius collet engages the flat spin-lock feature that keeps the bit from slipping.\u003c\/li\u003e\n\u003cli\u003eWe stock the PT-HD, whose 3.175 mm chuck accepts these bits without that engagement.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":47993137529021,"sku":"XDB-S03","price":6.29,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/Hero1_91a91937-fc4b-4629-abb5-0e9abeb14ac7.jpg?v=1786715757"},{"product_id":"dspiae-pt-hd-3-175mm-general-purpose-hand-drill","title":"DSPIAE PT-HD 3.175mm General Purpose Hand Drill","description":"\u003cp\u003eThe DSPIAE PT-HD is an entry-level hand drill for pilot holes and pinning work in plastic kits and resin parts. It uses the common 3.175 mm (1\/8″) shank standard, so compatible bits from other makers fit, while the reversible cap changes the body length when you need additional reach.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eABS plastic body with a zinc alloy quick-exchange chuck and magnetic locking system\u003c\/li\u003e\n\u003cli\u003eIncludes five tungsten steel bits: 0.5, 0.8, 1.0, 1.5 and 2.0 mm\u003c\/li\u003e\n\u003cli\u003ePolygonal cross-section helps stop the drill rolling across the workbench\u003c\/li\u003e\n\u003cli\u003eBearing connection supports smooth rotation during controlled manual drilling\u003c\/li\u003e\n\u003cli\u003eLightweight 52 g construction\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":47993137856701,"sku":"PT-HD","price":7.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/Hero1_7919bf16-008f-41de-bcca-02341f1525f1.jpg?v=1786715784"},{"product_id":"dspiae-at-vhds-aluminium-alloy-hand-drill","title":"DSPIAE AT-VHDS Aluminium Alloy Hand Drill","description":"\u003cp\u003eThe DSPIAE AT-VHDS is a lightweight aluminium hand drill for precise work on miniatures, scale models and plastic kits. Its fine bit range covers small holes and rivet detail, while the fitted case keeps the drill and accessories together between jobs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eForged aluminium alloy body with a sand-blasted, anodised finish\u003c\/li\u003e\n\u003cli\u003eThree-jaw chuck accepts bit diameters from 0.3 to 3.2 mm\u003c\/li\u003e\n\u003cli\u003eIncludes ten tungsten steel bits from 0.3 to 1.2 mm in 0.1 mm increments\u003c\/li\u003e\n\u003cli\u003eKnurled anti-slip grip and a bearing connection for smooth drilling action\u003c\/li\u003e\n\u003cli\u003eABS storage case with magnetic closure and an electrostatic flocked lining that protects the contents\u003c\/li\u003e\n\u003cli\u003eDrill weight: 32 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":47993138151613,"sku":"AT-VHDS","price":17.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/Hero1_29608a0d-a960-4827-8aab-638b945d1650.jpg?v=1786715862"},{"product_id":"dspiae-at-shd-precision-aluminium-alloy-hand-drill-set","title":"DSPIAE AT-SHD Precision Aluminium Alloy Hand Drill Set","description":"\u003cp\u003eThe DSPIAE AT-SHD is a Master Series hand drill for modellers who want a metal case, a four-jaw chuck and a more secure bit hold. Its reversed thread tightens anticlockwise and continues tightening during drilling, helping the bit remain seated rather than working loose.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAluminium alloy drill body with three sections of knurled anti-slip texture\u003c\/li\u003e\n\u003cli\u003eStainless steel four-jaw chuck with quick-release operation\u003c\/li\u003e\n\u003cli\u003eEmbedded magnet provides the chuck’s locking action\u003c\/li\u003e\n\u003cli\u003eHigh-precision bearing connection supports smooth manual rotation\u003c\/li\u003e\n\u003cli\u003eTen supplied tungsten steel bits cover 0.3–1.2 mm at 0.1 mm intervals\u003c\/li\u003e\n\u003cli\u003eRed hinged metal case; complete set weight: 195 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":47993138446525,"sku":"AT-SHD","price":16.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/E1_d1db7867-d495-4a41-9087-13fbf0907cd4.jpg?v=1786715917"},{"product_id":"dspiae-pt-mps-automatic-model-parts-detacher","title":"DSPIAE PT-MPS Automatic Model Parts Detacher","description":"\u003cp\u003eThe DSPIAE PT-MPS opens snap-fitted model assemblies that need to come apart again after a misalignment or incorrect fit. Its thin, chisel-like blade enters the joint without forcing fingers or an exposed knife edge into the seam, while the push-button linkage deploys it only when needed. The blade retracts fully into the body for safer storage and protection from drops.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompact overall dimensions: 70 × 42 × 17 mm\u003c\/li\u003e\n\u003cli\u003eSeparates snug-fit components, misaligned assemblies and unwanted snap-fitted parts\u003c\/li\u003e\n\u003cli\u003eNot intended for glued joints, where forcing the parts apart may cause breakage or lost surface detail\u003c\/li\u003e\n\u003cli\u003eMirror-polished blade is designed to require no routine maintenance\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":47993138643133,"sku":"PT-MPS","price":4.89,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/Hero1_26684455-b9ac-45b7-8982-64b7689d2fbd.jpg?v=1786715942"},{"product_id":"dspiae-at-hw-aluminium-alloy-hand-saw","title":"DSPIAE AT-HW Aluminium Alloy Hand Saw","description":"\u003cp\u003eThe DSPIAE AT-HW is a compact hand saw for controlled cuts in plastic kits, including removing moulded-on sections, opening hatches and dividing hull or fuselage parts. Its stainless steel blade is only 0.3 mm thick, producing a narrow kerf that removes less surrounding material and leaves less correction after the cut.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-density tooth pattern distributes cutting stress evenly, reducing binding and producing a cleaner kerf\u003c\/li\u003e\n\u003cli\u003eReplaceable blades are available as HW-01 Extra Fine and HW-02 Fine, both sold separately\u003c\/li\u003e\n\u003cli\u003eMagnetic cap covers the teeth in storage or attaches as an extension for a longer grip\u003c\/li\u003e\n\u003cli\u003eTextured aluminium-and-ABS handle provides a secure working surface\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":47993139200189,"sku":"AT-HW","price":10.69,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/Hero1_7ee585ee-f01a-4b7e-82dc-ec77c96d6754.jpg?v=1786715983"},{"product_id":"dspiae-at-tz01-thin-tipped-tweezers","title":"DSPIAE AT-TZ01 Thin-Tipped Tweezers","description":"\u003cp\u003eThe DSPIAE AT-TZ01 measures 123 mm and is intended for clamping very small precision parts during model work. Its forged one-piece body narrows to a sharp point, giving the working end a concentrated contact area for components that require careful placement. Unlike a flat-ended tweezer, contact remains focused at the tip.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePolished surface gives the body a smooth working feel\u003c\/li\u003e\n\u003cli\u003eThickened body design supports stability while pressure is applied\u003c\/li\u003e\n\u003cli\u003eCurved profile helps reduce parts bouncing free during clamping\u003c\/li\u003e\n\u003cli\u003eSharp end must be kept away from children under 10 years of age\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":47993139495101,"sku":"AT-TZ01","price":6.19,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/Z01Hero1.jpg?v=1786716009"},{"product_id":"dspiae-at-tz02-flat-end-tweezers","title":"DSPIAE AT-TZ02 Flat-End Tweezers","description":"\u003cp\u003eThe DSPIAE AT-TZ02 is the flat-ended option for model work where pointed contact would be unsuitable. Its one-piece stainless steel construction finishes in a broad working face that distributes contact across delicate components and sheet material. This geometry is intended for open handling tasks rather than precise placement with a narrow point.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBlunt working end has no piercing point\u003c\/li\u003e\n\u003cli\u003eWide contact face spreads the grip over a larger area\u003c\/li\u003e\n\u003cli\u003eFlat stock meets the tip across a broad surface instead of one narrow spot\u003c\/li\u003e\n\u003cli\u003eSuitable for handling photo-etched sheet and parts that should not be pierced or dented\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":47993139724477,"sku":"AT-TZ02","price":6.19,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/Z02Hero1.jpg?v=1786716058"},{"product_id":"dspiae-at-tz03-straight-tweezers","title":"DSPIAE AT-TZ03 Straight Tweezers","description":"\u003cp\u003eThe DSPIAE AT-TZ03 is the straight, general-purpose option for components positioned directly in front of your hand. Its one-piece stainless steel arms narrow continuously towards fine points, keeping the direction of the grip aligned with the body. This layout suits exposed work where no wall, recess or overhang blocks the approach.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUnbent points continue along the same axis as the handles\u003c\/li\u003e\n\u003cli\u003eBoth arms taper across their full length towards the working end\u003c\/li\u003e\n\u003cli\u003eFine contact points suit small parts in open areas\u003c\/li\u003e\n\u003cli\u003eStraight approach keeps the hand directly behind the component being held\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":47993140084925,"sku":"AT-TZ03","price":6.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/Z03Hero1.jpg?v=1786716101"},{"product_id":"dspiae-at-tz04-90-degree-angled-tweezers","title":"DSPIAE AT-TZ04 90° Angled Tweezers","description":"\u003cp\u003eThe DSPIAE AT-TZ04 turns both working tips through 90°, placing the contact point below the line of your hand. Built as one piece from stainless steel, it reaches into recesses and hatches, beneath overhangs and onto surfaces where straight tweezers would instead position your fingers directly above the component being held.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRight-angle turn is confined to the final few millimetres of both arms\u003c\/li\u003e\n\u003cli\u003eTip geometry lets the hand remain clear while a part is held flat against a surface\u003c\/li\u003e\n\u003cli\u003eRecessed components can be approached from above rather than directly from the side\u003c\/li\u003e\n\u003cli\u003eSharper 90° profile is distinct from the gentler bend used on the AT-TZ05\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":47993140347069,"sku":"AT-TZ04","price":6.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/Z04Hero1.jpg?v=1786716143"},{"product_id":"dspiae-at-tz05-angled-tweezers","title":"DSPIAE AT-TZ05 Angled Tweezers","description":"\u003cp\u003eThe DSPIAE AT-TZ05 is a 128 mm angled tweezer made from 420J2 stainless steel. Its swept bend moves the fine points out of the straight line of the arms without forming the abrupt 90° corner found on the AT-TZ04. The gradual curve gives you an offset approach to small components while preserving a smooth transition into the working tip.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA single forged piece forms the body and its two working points.\u003c\/li\u003e\n\u003cli\u003eMirror polishing produces a smooth finish across the steel surface.\u003c\/li\u003e\n\u003cli\u003eHardened arms retain flexibility and rust resistance while providing control for picking and holding.\u003c\/li\u003e\n\u003cli\u003eBecause the points are sharp, keep the tool away from children under 10 years old.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":47993140641981,"sku":"AT-TZ05","price":6.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/Z05Hero1.jpg?v=1786716175"},{"product_id":"dspiae-at-tz06-anti-static-tweezers-blunt","title":"DSPIAE AT-TZ06 Anti-Static Tweezers – Blunt","description":"\u003cp\u003eThe DSPIAE AT-TZ06 is the pressing and positioning option among the three anti-static designs. A 420J2 stainless steel frame carries separate carbon fibre working ends, giving the tool a metal supporting body and a different contact material. This geometry is intended for thin or easily marked parts, where concentrated pressure from a fine point would be unsuitable.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEach extra-strong tip is broad and blunt, with no piercing point.\u003c\/li\u003e\n\u003cli\u003eThe tips stop static electricity from curling the edge of decal film.\u003c\/li\u003e\n\u003cli\u003eTwo cross-head screws on each arm secure its replaceable working end.\u003c\/li\u003e\n\u003cli\u003eFlat faces can hold photo-etched sheet and clear parts across a wider area.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":47993140904125,"sku":"AT-TZ06","price":5.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/Z06Hero1.jpg?v=1786716221"},{"product_id":"dspiae-at-tz07-anti-static-tweezers-pointed","title":"DSPIAE AT-TZ07 Anti-Static Tweezers – Pointed","description":"\u003cp\u003eThe DSPIAE AT-TZ07 is the placing tool within the anti-static trio, intended for lifting and positioning small decals or precision components. Separate carbon fibre contacts sit on a 420J2 stainless steel frame, so the steel supplies the body while a different material meets the item. Its narrow front keeps more of a tiny part visible during precise movement.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFine pointed ends concentrate the hold within a small contact area.\u003c\/li\u003e\n\u003cli\u003eDecal film stays flat at its edge instead of curling through static electricity.\u003c\/li\u003e\n\u003cli\u003eScrew fixings allow both working pieces to be removed and replaced.\u003c\/li\u003e\n\u003cli\u003eThe fitted contacts use extra-strong carbon fibre.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":47993141166269,"sku":"AT-TZ07","price":5.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/Z07Hero1.jpg?v=1786716253"},{"product_id":"dspiae-at-tz08-anti-static-tweezers-angled","title":"DSPIAE AT-TZ08 Anti-Static Tweezers – Angled","description":"\u003cp\u003eCurved carbon fibre tips extend from the 420J2 stainless steel arms of the DSPIAE AT-TZ08. Because the contact point sits below the line of the hand, you can lift a tiny item from a flat surface or lower it into a recess without your fingers covering the work. This is the access-oriented shape within the anti-static group.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEach working end follows a continuous curve rather than a sharp crease.\u003c\/li\u003e\n\u003cli\u003eStatic electricity does not curl decal-film edges where the carbon fibre makes contact.\u003c\/li\u003e\n\u003cli\u003eCross-head screws fasten the replaceable tip to each steel arm.\u003c\/li\u003e\n\u003cli\u003eExtra-strong carbon fibre provides the working surface for picking tiny pieces.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":47993141493949,"sku":"AT-TZ08","price":5.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/Z08Hero1.jpg?v=1786716300"},{"product_id":"dspiae-mpc-20-model-painting-clip","title":"DSPIAE MPC-20 Model Painting Clip","description":"\u003cp\u003eTwenty identical crocodile clips mounted on 185 mm handles make up the DSPIAE MPC-20, a holding set for keeping small parts away from the fingers during spraying and drying. The long handles can be rotated as colour is applied, giving access around the part without releasing the jaws. Once coated, the handle is positioned upright while the paint dries; no stand forms part of this set.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEvery handle is PE and measures 2 mm in diameter.\u003c\/li\u003e\n\u003cli\u003eThe crocodile clips are made from iron.\u003c\/li\u003e\n\u003cli\u003eSoft rubber sleeves cover the clip jaws.\u003c\/li\u003e\n\u003cli\u003eRubber tubing reinforces the junction between each clip and its handle.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":47993141756093,"sku":"MPC-20","price":5.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/Hero1_65638629-cba8-46e1-a878-228410fb7df4.jpg?v=1786716388"},{"product_id":"dspiae-pt-rdb-retractable-dust-brush","title":"DSPIAE PT-RDB Retractable Dust Brush","description":"\u003cp\u003eA dual-ended pocket dust brush, the DSPIAE PT-RDB carries two retractable nylon tips in one ABS body. A slider swaps the working end while keeping the unused bristles enclosed, giving one compact tool for dry dust removal on finished models and recessed detail. This is a maintenance brush rather than a brush for applying colour, and neither tip should be used while paint is wet.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe wide tip measures 24 mm long by 24.5 mm wide.\u003c\/li\u003e\n\u003cli\u003eFine-tip dimensions are 12 mm by 10 mm.\u003c\/li\u003e\n\u003cli\u003eSofter bristles on the broad end protect a finished surface.\u003c\/li\u003e\n\u003cli\u003eThe narrower end is stiffer for clearing panel lines and seams.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":47993142051005,"sku":"PT-RDB","price":4.89,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/Hero1_70bdfc22-adca-48ab-bf5e-bf3c2d97c96a.jpg?v=1786716422"},{"product_id":"dspiae-tc-s01-departure-tool-combo-set","title":"DSPIAE TC-S01 Departure Tool Combo Set","description":"\u003cp\u003eThe DSPIAE TC-S01 Departure set is a starter workshop arranged in its own fitted plastic case, with shaped foam recesses in both lid and base for storage and carrying. It covers the working sequence from separating a plastic part and trimming the gate to sanding and final polishing. A single-blade nipper handles the first cut, while the abrasive selection moves from coarse clean-up through finer stages and finishes with a Siren glass polishing file.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe “Dawning” hobby knife is accompanied by 20 spare blades.\u003c\/li\u003e\n\u003cli\u003eStraight and angled tweezers give the case distinct tip geometries.\u003c\/li\u003e\n\u003cli\u003eSponge-backed papers follow curved surfaces, while self-adhesive sheets sit on rigid boards for flat work.\u003c\/li\u003e\n\u003cli\u003eScissors, a marker and the knife cover cutting and line-work before surface preparation.\u003c\/li\u003e\n\u003cli\u003eNumbered recesses give every tool a fixed return point inside the fitted trays.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":47993142313149,"sku":"TC-S01","price":31.19,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/Hero1_606eb0f0-943b-4e15-9164-b86a39fa8579.jpg?v=1786716473"},{"product_id":"dspiae-pt-sp02-acrylic-sanding-pad-set-yellow","title":"DSPIAE PT-SP02 Acrylic Sanding Pad Set – Yellow","description":"\u003cp\u003eThe yellow DSPIAE PT-SP02 uses 280-grit paper for coarse clean-up, knocking back sprue-gate stubs or seams before finer grades take over. The rigid acrylic components are reusable backing pads rather than abrasives in their own right. Their job is to keep the working face flat while replaceable self-adhesive sandpaper supplies the cut.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidths measure 5, 10 and 25 mm, with a shared thickness of 2.5 mm.\u003c\/li\u003e\n\u003cli\u003eYellow acrylic and the silkscreened 280 marking identify the loaded grit without a separate sticker.\u003c\/li\u003e\n\u003cli\u003eThe 5 mm pad enters recesses and narrow spaces; the 25 mm version supports a broader flat area.\u003c\/li\u003e\n\u003cli\u003eKeep the pads away from children under 14 years of age to avoid injury.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":47993142640829,"sku":"PT-SP02","price":3.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/PT-SP02Hero1.jpg?v=1786716522"},{"product_id":"dspiae-pt-sp04-acrylic-sanding-pad-set-orange","title":"DSPIAE PT-SP04 Acrylic Sanding Pad Set – Orange","description":"\u003cp\u003eThe orange DSPIAE PT-SP04 carries 400-grit paper through the general clean-up stage between coarse shaping and later polishing. Its reusable acrylic faces stay rigid and flat while a self-adhesive abrasive strip provides the working surface. The 400 grade removes marks left by the coarser pass without being positioned as the final polishing step.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBacking widths are 5 mm, 10 mm and 25 mm; every one is 2.5 mm thick.\u003c\/li\u003e\n\u003cli\u003eLaser-cut outlines are manually polished to leave smooth edges.\u003c\/li\u003e\n\u003cli\u003eOrange colour and a printed 400 replace a separate grit-identification sticker.\u003c\/li\u003e\n\u003cli\u003eThe 25 mm face supports flat kit surfaces, while narrower pads work beside panel lines or inside recesses.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":47993143001277,"sku":"PT-SP04","price":3.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/PT-SP04Hero1.jpg?v=1786716568"},{"product_id":"dspiae-pt-sp06-acrylic-sanding-pad-set-red","title":"DSPIAE PT-SP06 Acrylic Sanding Pad Set – Red","description":"\u003cp\u003eThe DSPIAE PT-SP06 sits between shaping and finishing, using 600-grit paper to reduce scratches left by a 400 pass before priming. Its red acrylic pieces are reusable supports; abrasion comes from the self-adhesive strip fixed to the face, not from the pad itself. Replacing worn paper retains the same rigid backing and visible grit identity.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThree widths—5, 10 and 25 mm—share the same 2.5 mm thickness.\u003c\/li\u003e\n\u003cli\u003eThe silkscreened 600 and red body show which abrasive is fitted at a glance.\u003c\/li\u003e\n\u003cli\u003eThe narrow backing enters panel-line spaces and recesses; the widest maintains more contact across open surfaces.\u003c\/li\u003e\n\u003cli\u003eSolvent cement and thinner can damage the acrylic, so keep both away from the pads.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":47993143230653,"sku":"PT-SP06","price":3.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/PT-SP06Hero1.jpg?v=1786716603"},{"product_id":"dspiae-pt-sp08-acrylic-sanding-pad-set-purple","title":"DSPIAE PT-SP08 Acrylic Sanding Pad Set – Purple","description":"\u003cp\u003eThe purple DSPIAE PT-SP08 holds 800-grit paper for the finishing pass before primer or between coats, while the range continues with 1000, 1200 and 1500 grades. A self-adhesive sheet turns each rigid acrylic backing into a working sanding tool and can be changed when spent. The pad remains reusable while only the abrasive face is replaced.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYou get 5, 10 and 25 mm working widths, all built to 2.5 mm thickness.\u003c\/li\u003e\n\u003cli\u003eThe 5 mm option reaches confined details that the 25 mm face cannot enter.\u003c\/li\u003e\n\u003cli\u003eThe purple body and silkscreened 800 make the fitted grade recognisable without adding a label.\u003c\/li\u003e\n\u003cli\u003eIts flat face can sand an open kit surface or a component secured in a small clamp.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":47993143525565,"sku":"PT-SP08","price":3.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/PT-SP08Hero1.jpg?v=1786716644"},{"product_id":"dspiae-pt-sp10-acrylic-sanding-pad-set-azure","title":"DSPIAE PT-SP10 Acrylic Sanding Pad Set – Azure","description":"\u003cp\u003eThe blue DSPIAE PT-SP10 begins the polishing end of the pad range. Its 1000-grit self-adhesive paper follows the clean-up stages, refining an already-shaped surface before primer or a gloss coat rather than correcting the shape itself. The acrylic backings remain flat, reusable tools when the abrasive wears out; trim and replace the paper while retaining the same colour-coded support.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe narrow pad measures 5 mm across, the middle 10 mm and the broad face 25 mm; each backing is 2.5 mm thick.\u003c\/li\u003e\n\u003cli\u003eBlue faces and silkscreened 1000 identifiers distinguish the loaded abrasive without added stickers.\u003c\/li\u003e\n\u003cli\u003eCut a strip to length with a hobby knife, peel it and press it onto the chosen pad.\u003c\/li\u003e\n\u003cli\u003eThe smallest width works between close panel lines, while the broadest keeps contact across open surfaces.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":47993143754941,"sku":"PT-SP10","price":3.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/PT-SP10Hero1.jpg?v=1786716685"},{"product_id":"dspiae-pt-sp12-acrylic-sanding-pad-set-dark-blue","title":"DSPIAE PT-SP12 Acrylic Sanding Pad Set – Dark Blue","description":"\u003cp\u003eThe dark blue DSPIAE PT-SP12 handles refinement after shaping and initial polishing are complete. At 1200 grit, the self-adhesive paper reduces marks that are more visible than tactile, keeping attention on surface preparation rather than material removal. Each acrylic pad acts as a reusable, rigid carrier, so the abrasive can be renewed without changing the familiar colour and printed identifier.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAt 2.5 mm thick, the backings measure 25 mm, 10 mm and 5 mm across.\u003c\/li\u003e\n\u003cli\u003eThe 10 mm backing balances access around compact flats with more support than the narrowest option.\u003c\/li\u003e\n\u003cli\u003eLaser cutting establishes the outline before manual polishing smooths each edge.\u003c\/li\u003e\n\u003cli\u003eExposure to thinner or solvent cement can mark the acrylic surface.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":47993143984317,"sku":"PT-SP12","price":3.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/PT-SP12Hero1.jpg?v=1786716725"},{"product_id":"dspiae-pt-sp15-acrylic-sanding-pad-set-green","title":"DSPIAE PT-SP15 Acrylic Sanding Pad Set – Green","description":"\u003cp\u003eThe green DSPIAE PT-SP15 carries the finest grade offered in this acrylic-pad range. Its 1500-grit self-adhesive paper is intended for final smoothing before paint or for reducing a dust nib between coats, once shaping is already complete. A rigid reusable backing keeps the abrasive level over the work instead of letting an unsupported strip fold around the defect.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe 5 mm and 10 mm formats accompany a 25 mm pad, all with a 2.5 mm profile.\u003c\/li\u003e\n\u003cli\u003eGreen colouring and the printed 1500 remain with the tool when spent paper is replaced.\u003c\/li\u003e\n\u003cli\u003eTrim the abrasive with a hobby knife before peeling it onto the required backing.\u003c\/li\u003e\n\u003cli\u003eThe narrowest pad reaches recessed details; the broad face covers larger flat areas.\u003c\/li\u003e\n\u003cli\u003eDo not tap, drop or bend the acrylic pieces with excessive force.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":47993144246461,"sku":"PT-SP15","price":3.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/PT-SP15Hero1.jpg?v=1786716757"},{"product_id":"dspiae-as-rd25-aluminium-alloy-sanding-board-red-3pcs","title":"DSPIAE AS-RD25 Aluminium Alloy Sanding Board Red 3pcs","description":"\u003cp\u003eThe Blazing Red DSPIAE AS-RD25 gives you three identical 25 mm backing boards for keeping several sandpaper grades ready on broad, flat work. Their rigid faces bridge seams instead of dipping into them, helping hull sides and wing roots stay level during sanding. Each board is 2 mm thick, has no abrasive coating of its own, and requires self-adhesive sandpaper bought separately.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEach board is machined from one piece of aluminium alloy, then sandblasted and anodised.\u003c\/li\u003e\n\u003cli\u003eThe treated face allows a used strip to peel away with minimal visible adhesive residue.\u003c\/li\u003e\n\u003cli\u003eA full-width DSPIAE SP-series sheet fits the 25 mm surface directly without trimming.\u003c\/li\u003e\n\u003cli\u003eIncluded grit-identification stickers run from 180# through 2500# and label the paper fitted to each board.\u003c\/li\u003e\n\u003cli\u003eWaterproof, corrosion-resistant treatment allows the boards to be used for wet-sanding.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":47993144541373,"sku":"AS-RD25","price":5.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/AS-RD25Hero1.jpg?v=1786717331"},{"product_id":"dspiae-as-bk25-aluminium-alloy-sanding-board-black-3pcs","title":"DSPIAE AS-BK25 Aluminium Alloy Sanding Board Black 3pcs","description":"\u003cp\u003eThree 25 mm boards make the Knight Black DSPIAE AS-BK25 a flat-sanding set for broad surfaces and seams. Light-coloured sanding dust remains visible against the black anodised finish, while the rigid face spans a seam rather than following its dip. The reusable metal backing is 2 mm thick; self-adhesive abrasive sheets are obtained separately and provide the entire cutting surface.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll three boards can remain loaded with different paper grades at the same time.\u003c\/li\u003e\n\u003cli\u003eGrit ID labels from 180# to 2500# show which abrasive is attached to each tool.\u003c\/li\u003e\n\u003cli\u003eIntegral machining is followed by sandblasting and an anodising treatment.\u003c\/li\u003e\n\u003cli\u003eThe 25 mm width accepts a matching SP-series sheet without cutting it down.\u003c\/li\u003e\n\u003cli\u003eRemoving worn paper leaves no visible glue residue on the treated face.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":47993144770749,"sku":"AS-BK25","price":5.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/AS-BK25Hero1.jpg?v=1786717362"},{"product_id":"dspiae-as-rd15-aluminium-alloy-sanding-board-red-4pcs","title":"DSPIAE AS-RD15 Aluminium Alloy Sanding Board Red 4pcs","description":"\u003cp\u003eThe Blazing Red DSPIAE AS-RD15 is a four-board detail set, but its code does not describe the width: two boards are 5 mm and two are 10 mm. The narrower pair reaches recesses, intakes and gaps between raised details, while the 10 mm backings suit panel-line edges and compact flats. All are 2 mm thick, and the required self-adhesive sandpaper is purchased separately.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOne board at each width can retain coarser paper while its partner carries a finer sheet.\u003c\/li\u003e\n\u003cli\u003eAlign an SP-series sheet with three board edges, then trim the excess to the required width.\u003c\/li\u003e\n\u003cli\u003eThe supplied identification stickers cover paper grades from 180# up to 2500#.\u003c\/li\u003e\n\u003cli\u003eAnodised, sandblasted surfaces minimise adhesive residue when the abrasive is removed.\u003c\/li\u003e\n\u003cli\u003eIntegral machining keeps every narrow aluminium backing rigid and flat.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":47993145032893,"sku":"AS-RD15","price":5.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/AS-RD15Hero1.jpg?v=1786717108"},{"product_id":"dspiae-as-bk15-aluminium-alloy-sanding-board-black-4pcs","title":"DSPIAE AS-BK15 Aluminium Alloy Sanding Board Black 4pcs","description":"\u003cp\u003eA narrow strip of wet-and-dry bends around the work when there is no rigid support behind it. The Knight Black DSPIAE AS-BK15 provides that support with two 5 mm boards for restricted access and two 10 mm boards for small flat areas; none is 15 mm wide. Every backing is 2 mm thick, and suitable self-adhesive paper must be sourced separately.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor either narrow board, align an SP-series sheet to three edges and cut away the surplus.\u003c\/li\u003e\n\u003cli\u003eStickers spanning 180# to 2500# identify the abrasive currently mounted on each board.\u003c\/li\u003e\n\u003cli\u003eThe boards are machined integrally from aluminium alloy stock before surface finishing.\u003c\/li\u003e\n\u003cli\u003eSandblasting and anodising reduce glue residue after a spent strip is lifted.\u003c\/li\u003e\n\u003cli\u003eWaterproof and corrosion-resistant surfaces support wet-sanding work.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":47993145229501,"sku":"AS-BK15","price":5.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/AS-BK15Hero1.jpg?v=1786717145"},{"product_id":"dspiae-as-25rd-pro-aluminium-alloy-sanding-board","title":"DSPIAE AS-25RD PRO Aluminium Alloy Sanding Board","description":"\u003cp\u003eThe red DSPIAE AS-25RD PRO is a single Cerberus hand-held sanding stick with two working faces. Its bare corrugated side shaves directly, while the smooth reverse accepts self-adhesive paper bought separately. Rigid support prevents the abrasive from folding into a seam, giving you a flat reference before or after working with the uncovered metal texture.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe sanding area measures 25 x 75 mm, paired with a 90 mm moulded handle.\u003c\/li\u003e\n\u003cli\u003eA milled sawtooth and wave pattern increases the cutting action on the paper-free face.\u003c\/li\u003e\n\u003cli\u003eThis upgraded edition enlarges the smooth surface available for an adhesive strip.\u003c\/li\u003e\n\u003cli\u003eForged aluminium construction is sandblasted and anodised for a rust-resistant finish.\u003c\/li\u003e\n\u003cli\u003eThe treated board can be used for wet-sanding.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":47993145491645,"sku":"AS-25RD PRO","price":7.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/Hero1_07ac4675-c042-4444-be6a-908159ae252d.jpg?v=1786717172"},{"product_id":"dspiae-as-25gy-pro-aluminium-alloy-sanding-board","title":"DSPIAE AS-25GY PRO Aluminium Alloy Sanding Board","description":"\u003cp\u003eThe grey DSPIAE AS-25GY PRO uses its anodised surface as a visual background, making pale sanding dust easier to see while checking the active area. One side is smooth for separately purchased self-adhesive paper; the corrugated face opposite it works uncovered. This dual arrangement keeps a paper-backed surface ready while leaving an integral cutting texture available without changing tools.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA 25 x 75 mm contact area extends from the 90 mm handle.\u003c\/li\u003e\n\u003cli\u003eThe bare pattern combines milled corrugation with sawtooth and wave forms to strengthen shaving action.\u003c\/li\u003e\n\u003cli\u003eForging produces the aluminium body before sandblasting and anodising are applied.\u003c\/li\u003e\n\u003cli\u003eThe revised version increases the usable area of the smooth face.\u003c\/li\u003e\n\u003cli\u003eWet work does not rust the anodised sanding stick.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":47993145753789,"sku":"AS-25GY PRO","price":7.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/GYPRO.jpg?v=1786717231"},{"product_id":"dspiae-as-25bk-pro-aluminium-alloy-sanding-board","title":"DSPIAE AS-25BK PRO Aluminium Alloy Sanding Board","description":"\u003cp\u003eThe black DSPIAE AS-25BK PRO pairs a 90 mm handle with a 25 x 75 mm sanding area, keeping your grip away from the contact surface during longer strokes. Its corrugated face cuts without abrasive; turn the same Cerberus board over for a smooth platform that accepts self-adhesive paper obtained separately. Loading one side does not cover the bare working texture on the other.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOne dual-sided hand-held sanding stick is supplied, not a multipack.\u003c\/li\u003e\n\u003cli\u003eThe milled face uses waves and sawtooth forms to provide its own shaving action.\u003c\/li\u003e\n\u003cli\u003eAn enlarged smooth working area distinguishes the current upgraded edition.\u003c\/li\u003e\n\u003cli\u003eAluminium forging gives the tool its rigid body before anodised, sandblasted finishing.\u003c\/li\u003e\n\u003cli\u003eThe rust-resistant treatment permits wet-sanding without changing boards.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":47993146015933,"sku":"AS-25BK PRO","price":7.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/GYBK_1fef2ff2-d46a-4516-af4e-4597af532ace.jpg?v=1786717275"},{"product_id":"dspiae-as-25fpbk-flat-sanding-piece-black","title":"DSPIAE AS-25FPBK Flat Sanding Piece Black","description":"\u003cp\u003eThe black DSPIAE AS-25FPBK is a reusable plane-profile support for self-adhesive paper on flat panels. Rather than pressing a loose strip with your fingers, you work against a fixed face that keeps contact level across the part. Only one machined block is supplied; the abrasive is purchased separately and cut to fit before use.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIts section stands 19 mm high, making this the lowest form in the profile range.\u003c\/li\u003e\n\u003cli\u003eA sloping body runs into bevelled edges that reach beneath raised panel detail.\u003c\/li\u003e\n\u003cli\u003eCover the working face with one paper piece cut to 25 × 75 mm.\u003c\/li\u003e\n\u003cli\u003eIntegral machining forms the aluminium block before its black anodised finish is applied.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":47993146310845,"sku":"AS-25FPBK","price":6.29,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/25-FPBKHero1.jpg?v=1786717424"},{"product_id":"dspiae-as-25cpbk-curved-sanding-piece-black","title":"DSPIAE AS-25CPBK Curved Sanding Piece Black","description":"\u003cp\u003eThe black DSPIAE AS-25CPBK gives self-adhesive paper a fixed curved support for working inside a hollow surface. Its convex arc follows the recess instead of pressing it towards a flatter form, avoiding the changing pressure created by a fingertip behind the strip. One reusable block is provided, while suitable abrasive paper must be obtained separately.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe arched section rises to a height of 28 mm.\u003c\/li\u003e\n\u003cli\u003eOne 25 × 75 mm paper piece is laid over the shaped working face.\u003c\/li\u003e\n\u003cli\u003eThe arc is integrally machined with the rest of the aluminium body rather than attached as a separate part.\u003c\/li\u003e\n\u003cli\u003eBlack anodising completes the full-metal construction.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":47993146540221,"sku":"AS-25CPBK","price":7.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/25-CPBKHero1.jpg?v=1786717460"},{"product_id":"dspiae-as-25ppbk-perpendicular-sanding-piece-black","title":"DSPIAE AS-25PPBK Perpendicular Sanding Piece Black","description":"\u003cp\u003eThe black DSPIAE AS-25PPBK brings a fixed perpendicular form into internal corners. Two working faces meet at 90°, so a loose abrasive strip no longer has to fold across the junction and soften its definition. The section is 28 mm high, and the self-adhesive paper required for use is bought separately. This is a single reusable block.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAn 18 mm overall width contains the two adjoining sanding faces.\u003c\/li\u003e\n\u003cli\u003eCut two 12 × 75 mm abrasive strips and apply one to either side of the corner.\u003c\/li\u003e\n\u003cli\u003eThe one-piece body is machined from aluminium alloy and finished with black anodising.\u003c\/li\u003e\n\u003cli\u003eIts fixed profile is intended for steps, box vents and hull-to-deck joins.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":47993146802365,"sku":"AS-25PPBK","price":6.29,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/25-PPBKHero1.jpg?v=1786717500"},{"product_id":"dspiae-cfb-25-carbon-fibre-sanding-board","title":"DSPIAE CFB-25 Carbon Fibre Sanding Board","description":"\u003cp\u003eThe DSPIAE CFB-25 turns self-adhesive paper into a broad hand-held sanding face while keeping the consumable and backing as separate parts. This single 25 mm carbon fibre board is intended for hull sides, wing roots and seams where the tool must bridge the surface rather than chase local dips. Abrasive paper is purchased separately; a full-width sheet can cover the board without being cut narrower.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon fibre keeps the backing light while resisting stretching and bending.\u003c\/li\u003e\n\u003cli\u003eAngled long edges enter inside corners that square-edged sanding tools can ride over.\u003c\/li\u003e\n\u003cli\u003eThe sticker sheet spans 180# to 2500# for recording the paper fitted to the board.\u003c\/li\u003e\n\u003cli\u003eIts broad face covers larger parts for quicker, more even sanding.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":47993147097277,"sku":"CFB-25","price":4.59,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/cfb-25-1.jpg?v=1786717546"},{"product_id":"dspiae-cb-5-carbon-fibre-sanding-board-5mm","title":"DSPIAE CB-5 Carbon Fibre Sanding Board 5mm","description":"\u003cp\u003eAt 5 mm wide, the DSPIAE CB-5 is the narrowest carbon fibre board in the range, made for recesses, intakes, vents and small curved parts. A loose strip of wet-and-dry follows every dip; this board keeps self-adhesive paper supported while still fitting the gap. The abrasive is bought separately, aligned with three edges and trimmed to match the working face.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe reusable board remains in service when its worn paper is replaced.\u003c\/li\u003e\n\u003cli\u003eLightweight carbon fibre resists stretching and bending during use.\u003c\/li\u003e\n\u003cli\u003eAn angled long edge can meet an internal corner that a square profile misses.\u003c\/li\u003e\n\u003cli\u003eApply an included 180#–2500# ID sticker to identify the attached paper.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":47993147359421,"sku":"CB-5","price":2.59,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/CB-5Hero1.jpg?v=1786717575"},{"product_id":"dspiae-cb-10-carbon-fibre-sanding-board-10mm","title":"DSPIAE CB-10 Carbon Fibre Sanding Board 10mm","description":"\u003cp\u003eThe 10 mm DSPIAE CB-10 covers jobs between confined access and broad surface work: panel-line edges, small flats and sprue-gate clean-up on compact parts. Its carbon fibre backing stays light and rigid behind a self-adhesive strip, making this a practical width to keep loaded for routine use. Abrasive paper is obtained separately and can be renewed without changing the board.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAn included sticker records the paper grade on the front face for quick identification.\u003c\/li\u003e\n\u003cli\u003ePosition three edges of the paper flush with the board, then slice off the overhang.\u003c\/li\u003e\n\u003cli\u003eThe carbon structure withstands stretching and bending while retaining its form.\u003c\/li\u003e\n\u003cli\u003eIts angled edge reaches intricate corners where a square-edged tool has limited contact.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":47993147719869,"sku":"CB-10","price":2.89,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/CB-10Hero1.jpg?v=1786717601"},{"product_id":"dspiae-cb-25-carbon-fibre-sanding-board-25mm","title":"DSPIAE CB-25 Carbon Fibre Sanding Board 25mm","description":"\u003cp\u003eThe DSPIAE CB-25 is a 25 mm carbon fibre carrier for replaceable self-adhesive abrasive, combining a wide sanding area with low mass. The board stays in service while a worn strip is peeled away and renewed, so its job is to hold the paper flat rather than supply the cut. Paper is sourced separately for either wet- or dry-sanding work.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe wide face suits larger surfaces where faster, even coverage matters more than confined access.\u003c\/li\u003e\n\u003cli\u003eCarbon fibre provides a light backing that resists stretching and bending.\u003c\/li\u003e\n\u003cli\u003eAngled longitudinal edges reach further into inside corners than square-edged sticks.\u003c\/li\u003e\n\u003cli\u003eThe supplied ID labels cover 180# through 2500# and identify the abrasive mounted on the board.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":47993147916477,"sku":"CB-25","price":2.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/CB-25Hero1.jpg?v=1786717631"},{"product_id":"dspiae-cb-s-carbon-fibre-polishing-board-flat-angle-set","title":"DSPIAE CB-S Carbon Fibre Polishing Board Flat Angle Set","description":"\u003cp\u003eThe DSPIAE CB-S gives you three straight-edged carbon fibre boards for moving between detail access and broad flat work. One is 5 mm wide, another 10 mm and the third 25 mm, so the backing can match the area without changing material or handling style. Self-adhesive abrasive is purchased separately and cut for whichever face you load.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEach board presents one angled longitudinal edge for reaching the base of an inside corner.\u003c\/li\u003e\n\u003cli\u003eStraight profiles keep the fitted paper level across flats and seams.\u003c\/li\u003e\n\u003cli\u003eOnce an abrasive strip wears, remove it and reload the same reusable backing.\u003c\/li\u003e\n\u003cli\u003eThe enclosed identification stickers record which paper is carried by each width.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":47993148178621,"sku":"CB-S","price":3.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/CB-SHero1.jpg?v=1786717669"},{"product_id":"dspiae-cfb-s01-irregular-carbon-fibre-sanding-stick","title":"DSPIAE CFB-S01 Irregular Carbon Fibre Sanding Stick","description":"\u003cp\u003eThe DSPIAE CFB-S01 is a three-piece irregular-blade set for access where rectangular sanding tools stop short. A spike enters vents and intakes, a full-length taper works into progressively narrower spaces, and a necked paddle keeps more support behind a small face. Each carbon fibre shape is reusable; self-adhesive paper is bought separately, traced around the blade and cut to its outline.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCFB-01 combines a waisted paddle with a fine projecting spike.\u003c\/li\u003e\n\u003cli\u003eCFB-02 tapers continuously along its full working length to a point.\u003c\/li\u003e\n\u003cli\u003eCFB-03 ends in a narrow paddle carried on a straight neck.\u003c\/li\u003e\n\u003cli\u003eUse the supplied ID labels to record which paper is mounted on each blade.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":47993148440765,"sku":"CFB-S01","price":4.19,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/CFB-S01Hero1.jpg?v=1786717750"},{"product_id":"dspiae-cfb-s02-irregular-carbon-fibre-sanding-stick","title":"DSPIAE CFB-S02 Irregular Carbon Fibre Sanding Stick","description":"\u003cp\u003eThe DSPIAE CFB-S02 contains three carbon fibre blades shaped for larger curved surfaces and controlled work beside raised detail. Its broad tapers spread contact over an arc, while a flat-ended paddle can stop at an edge without a point digging in. Sandpaper is sourced separately: draw each blade outline on self-adhesive paper, then cut the covering to match.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCFB-04 forms a broad taper that finishes at a point.\u003c\/li\u003e\n\u003cli\u003eCFB-05 is a waisted paddle with a flat square tip.\u003c\/li\u003e\n\u003cli\u003eCFB-06 uses another broad taper with a blunter shoulder.\u003c\/li\u003e\n\u003cli\u003eThe enclosed sticker sheet keeps the fitted abrasive identifiable after cutting.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":47993148670141,"sku":"CFB-S02","price":4.19,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/CFB-S02Hero1.jpg?v=1786717780"},{"product_id":"dspiae-cfb-s03-irregular-carbon-fibre-sanding-stick","title":"DSPIAE CFB-S03 Irregular Carbon Fibre Sanding Stick","description":"\u003cp\u003eThe DSPIAE CFB-S03 combines three approaches in one irregular set: a necked paddle, a taper and a straight 10 mm bar. The full-width piece gives conventional contact while the other profiles narrow the working face for more selective access. Abrasive paper is obtained separately; place each blade on the paper, trace around it and cut the self-adhesive covering to shape.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCFB-07 provides a waisted paddle joined to a square neck.\u003c\/li\u003e\n\u003cli\u003eCFB-08 supplies the tapered working profile within the set.\u003c\/li\u003e\n\u003cli\u003eCFB-09 remains a plain straight bar across its complete length.\u003c\/li\u003e\n\u003cli\u003ePaper grades can be marked on the blade with the included identification labels.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":47993148965053,"sku":"CFB-S03","price":4.19,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/CFB-S03Hero1.jpg?v=1786717932"},{"product_id":"dspiae-sf-15-siren-ultimate-precision-file-10000-12000","title":"DSPIAE SF-15 Siren Ultimate Precision File #10000–#12000","description":"\u003cp\u003eThe DSPIAE SF-15 is a parallel-sided tempered-glass file for flat panels and long open surfaces. Its square end and full-width blade keep the etched single-cut texture in contact across the work instead of narrowing towards a tip. The surface it leaves is equivalent to 10000–12000 grit sandpaper, placing this tool at the polishing end of a plastic clean-up sequence.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe abrading pattern is etched into the glass, so no paper or replaceable coating is required.\u003c\/li\u003e\n\u003cli\u003eThis file is not for metal; use it only on plastic or hard woods.\u003c\/li\u003e\n\u003cli\u003eClean the cutting texture with water and a toothbrush when residue reduces its bite.\u003c\/li\u003e\n\u003cli\u003eReturn the tempered-glass tool to its clear protective case between uses and avoid dropping it.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":47993149194429,"sku":"SF-15","price":5.29,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/SF-15Hero1.jpg?v=1786718344"},{"product_id":"dspiae-sf-16-irregular-glass-mirror-polishing-file","title":"DSPIAE SF-16 Irregular Glass Mirror Polishing File","description":"\u003cp\u003eThe DSPIAE SF-16 is an etched tempered-glass file with a 6 mm working tongue extending 26 mm beyond the wider body. That reduced section enters narrow gaps and slots while the single-cut surface polishes plastic directly, without a separate abrasive layer. Its polishing result is equivalent to sandpaper rated at 10000–12000 grit once the earlier shaping work is complete.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAn 84 mm main body supports the projecting tongue behind the restricted working area.\u003c\/li\u003e\n\u003cli\u003eUse is limited to plastic and hard woods, not for metal surfaces.\u003c\/li\u003e\n\u003cli\u003eA toothbrush used with fresh water clears the etched cut and restores its action.\u003c\/li\u003e\n\u003cli\u003eKeep the file inside its protective case when stored, as dropping or throwing the glass can break it.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":47993149456573,"sku":"SF-16","price":5.29,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/Sf-16Hero1.jpg?v=1786718301"},{"product_id":"dspiae-sf-17-irregular-glass-mirror-polishing-file","title":"DSPIAE SF-17 Irregular Glass Mirror Polishing File","description":"\u003cp\u003eThe DSPIAE SF-17 uses a 30 mm taper ending at a 1 mm point to direct its etched tempered-glass surface into corners, recesses and the ends of grooves. The point provides access without adding a disposable abrasive coating to the blade. Its single-direction cut produces the equivalent of a 10000–12000 grit sandpaper finish on an already-shaped plastic surface.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe main body remains full width for 80 mm before the taper begins.\u003c\/li\u003e\n\u003cli\u003eThe intended materials are plastic and hard woods; it is not for metal.\u003c\/li\u003e\n\u003cli\u003eWash the etched face with water, using a toothbrush to recover its cutting action.\u003c\/li\u003e\n\u003cli\u003eThe clear case protects the tempered glass during storage; do not drop or throw the file.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":47993149685949,"sku":"SF-17","price":5.29,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/SF-17Hero1.jpg?v=1786718371"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/collections\/Dspiae_aef846d0-b49d-4585-bcb1-421447d98af9.png?v=1784880313","url":"https:\/\/hobbyheaven.org\/en-ca\/collections\/dspiae.oembed?page=2","provider":"Hobby Heaven","version":"1.0","type":"link"}