{"product_id":"hobby-heaven-zephyr-needle-chucking-nut-hha-3202","title":"Hobby Heaven Zephyr Needle Chucking Nut (HHA-3202) – Replacement Airbrush Spare","description":"\u003cp\u003eLook through the cutaway handle of the Hobby Heaven Zephyr and the small knurled part at the back is this nut. It screws onto the needle chucking guide's split tail; tightening it squeezes that end around the needle, so needle and guide move as one with every pull of the trigger. When it slackens, the trigger still travels but the needle stays where it is and nothing sprays. Because it comes off at every needle clean, it ranks among the easiest parts to lose.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDiamond-knurled grip, tightened and loosened with fingers\u003c\/li\u003e\n\u003cli\u003eInternal thread matching the guide (HHA-3201)\u003c\/li\u003e\n\u003cli\u003eSmall rear opening for the needle tail: the needle can be adjusted while the nut is merely slackened\u003c\/li\u003e\n\u003cli\u003eShipped in a clear vial with a screw cap and foam insert, inside a blister marked HHA-3202\u003c\/li\u003e\n\u003cli\u003eOne nut for both the 0.3 mm and 0.5 mm builds; made for the Zephyr\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNut, or something else?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSign\u003c\/th\u003e\n\u003cth\u003eWhat to check\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNut lost\u003c\/td\u003e\n\u003ctd\u003eThis part\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTrigger moves, needle stays still\u003c\/td\u003e\n\u003ctd\u003eNut slack: snug it up firmly with fingers, usually no part needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpins without biting or will not start square\u003c\/td\u003e\n\u003ctd\u003eDamaged thread: this part, and look over the guide's thread too\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNut tight and undamaged, needle still slips\u003c\/td\u003e\n\u003ctd\u003eWorn guide tail: guide (HHA-3201)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePaint flows before the trigger comes back\u003c\/td\u003e\n\u003ctd\u003eNeedle clamped before it seated: slacken, let it settle into the nozzle, retighten\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTrigger floppy, no return\u003c\/td\u003e\n\u003ctd\u003eLook at the guide (HHA-3201) or spring case (HHA-3203) instead\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSigns it needs replacing\u003c\/h3\u003e\n\u003cp\u003eIt has gone missing, spins without ever biting, only starts at an angle, or the knurling is flattened and the nut squashed or split, which pliers usually cause. One that has simply loosened only needs tightening.\u003c\/p\u003e\n\u003ch3\u003eFitting\u003c\/h3\u003e\n\u003cp\u003eAir off, handle unscrewed. Check that the needle is fitted and resting lightly in the nozzle, not forced. Start the nut square on the guide's threaded tail with your fingers, snug it up firmly, pull the trigger back to watch the needle follow, then screw the handle back on.\u003c\/p\u003e\n\u003ch3\u003eWorth knowing\u003c\/h3\u003e\n\u003cp\u003eHang on to the vial: it is the natural home for the nut while the handle is off. Seat the needle first and tighten afterwards, never the other way round. This is one of the numbered parts of the Hobby Heaven Zephyr range, which keeps growing; once a number is given, it always means the same part.\u003c\/p\u003e","brand":"Hobby Heaven","offers":[{"title":"Default Title","offer_id":68436813054141,"sku":"HHA-3202","price":5.52,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/hobby-heaven-zephyr-needle-chucking-nut-hha-3202-2.jpg?v=1795191017","url":"https:\/\/hobbyheaven.org\/en-au\/products\/hobby-heaven-zephyr-needle-chucking-nut-hha-3202","provider":"Hobby Heaven","version":"1.0","type":"link"}