{"product_id":"hobby-heaven-zephyr-needle-chucking-guide-hha-3201","title":"Hobby Heaven Zephyr Needle Chucking Guide (HHA-3201) – Replacement Airbrush Spare","description":"\u003cp\u003eBehind the trigger of the Hobby Heaven Zephyr sits the part that really moves the needle. The needle passes along its centre, and the chucking nut clamps it at the split, threaded rear end. When you rock the trigger backwards, it bears on the curved front plate, so guide and needle slide rearwards together against the return spring; release it and the spring pushes both forward until the needle closes the nozzle and paint stops. The rear control knob limits the guide's travel, and the angle of its plate shapes how the pull feels.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCurved front plate with centre bush, polished body, slotted threaded tail\u003c\/li\u003e\n\u003cli\u003eServes the 0.3 mm setup and a Zephyr rebuilt for 0.5 mm alike\u003c\/li\u003e\n\u003cli\u003eMade solely for the Hobby Heaven Zephyr; no other model confirmed\u003c\/li\u003e\n\u003cli\u003ePacked in a blister marked HHA-3201 with barcode\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIs the guide to blame?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eWhat you see\u003c\/th\u003e\n\u003cth\u003eLikely cause\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTrigger comes back, needle does not\u003c\/td\u003e\n\u003ctd\u003eSnug the chucking nut (HHA-3202) first; slipping with a firm nut means a worn tail, so this part\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNo return or untidy shut-off right after a rebuild\u003c\/td\u003e\n\u003ctd\u003ePlate seated at a wrong angle; reseat it before ordering\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlack in the trigger\u003c\/td\u003e\n\u003ctd\u003eSpring case (HHA-3203) not fully screwed in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLever sticks or returns slowly\u003c\/td\u003e\n\u003ctd\u003ePaint residue, else the air valve (HHA-3401); rarely the guide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTrigger missing or bent\u003c\/td\u003e\n\u003ctd\u003eTrigger (HHA-3101)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBody bent, plate cracked, slots splayed, thread damaged\u003c\/td\u003e\n\u003ctd\u003eThis part\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSigns it needs replacing\u003c\/h3\u003e\n\u003cp\u003eReplace it when the needle shifts in the guide although the nut is tight, the tail slots have opened up or one side is bent, the nut will not run on smoothly over a flattened thread, the body catches as it slides, or the plate is cracked or distorted. One that was only refitted back to front is fine; reseat it.\u003c\/p\u003e\n\u003ch3\u003eFitting\u003c\/h3\u003e\n\u003cp\u003eAir off, then follow the parts diagram in the quick start guide. Remove the handle, ease off the nut, unscrew the nozzle and slide the needle forward and out. Take out spring case and knob, then draw out spring and old guide. Fit the new guide behind the trigger, plate angled so the pull feels even: this single step decides how the trigger feels. Refit spring and spring case by hand, the needle is threaded in from the front, then nozzle and caps; push the needle home lightly until it meets the nozzle and finger-tighten the nut.\u003c\/p\u003e\n\u003ch3\u003eWorth knowing\u003c\/h3\u003e\n\u003cp\u003eOnly fingers on the chucking nut: pliers squeeze the slotted tail out of round and it loses its grip. Nut, spring and spring case are sold separately. This is one of the numbered parts of the Hobby Heaven Zephyr range, which keeps growing; once a number is given, it always means the same part.\u003c\/p\u003e","brand":"Hobby Heaven","offers":[{"title":"Default Title","offer_id":68436812890301,"sku":"HHA-3201","price":6.71,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/hobby-heaven-zephyr-needle-chucking-guide-hha-3201-2.jpg?v=1795191010","url":"https:\/\/hobbyheaven.org\/en-au\/products\/hobby-heaven-zephyr-needle-chucking-guide-hha-3201","provider":"Hobby Heaven","version":"1.0","type":"link"}