{"product_id":"hobby-heaven-zephyr-cutaway-handle-hha-3301","title":"Hobby Heaven Zephyr Cutaway Handle (HHA-3301) – Replacement Airbrush Handle with O-Ring","description":"\u003cp\u003eHHA-3301 is the polished tail section of the Hobby Heaven Zephyr, the tube your hand rests on behind the trigger. It threads onto the rear of the body by hand and encloses the needle drive (chucking guide, spring case and chucking nut), shielding it from knocks and overspray. A window in its side lets you check and turn the chucking nut with the handle in place. Handles seldom wear out; they are swapped after a fall dents one, a thread gets crossed or one goes astray. It is the same handle whether your Zephyr runs a 0.3 mm or a 0.5 mm nozzle.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRubber O-ring already seated where the thread meets the tube\u003c\/li\u003e\n\u003cli\u003eSide window onto the chucking nut\u003c\/li\u003e\n\u003cli\u003eOpen tail, threaded inside, that takes the rear knob, HHA-3302\u003c\/li\u003e\n\u003cli\u003eBuilt for the Zephyr only, whichever nozzle size it carries\u003c\/li\u003e\n\u003cli\u003eComes in a Hobby Heaven box with the HHA-3301 label; knob not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHandle, or something else?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSymptom\u003c\/th\u003e\n\u003cth\u003eRemedy\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDented, kinked or split after a fall\u003c\/td\u003e\n\u003ctd\u003eReplace the handle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWill not start straight or binds as it turns\u003c\/td\u003e\n\u003ctd\u003eDamaged thread: replace it, and inspect the body's thread too\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRattles or unscrews itself\u003c\/td\u003e\n\u003ctd\u003eUsually a flat or missing O-ring; a new handle arrives with one fitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRear knob will not hold or will not go in\u003c\/td\u003e\n\u003ctd\u003eTry a new knob (HHA-3302) first; if that fails too, the handle's inner thread is at fault\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNeedle stays put when the trigger moves\u003c\/td\u003e\n\u003ctd\u003eA loose chucking nut (HHA-3202), not this part\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTrigger loose or slow to return\u003c\/td\u003e\n\u003ctd\u003eLook at the spring case (HHA-3203) or chucking guide (HHA-3201) instead\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSigns it needs replacing\u003c\/h3\u003e\n\u003cp\u003eA kink or dent from landing on its tail, a burred or crossed thread that no longer runs smoothly, an inner thread that can no longer grip the knob, or a handle that has gone missing. Scuffs on the polish are only cosmetic.\u003c\/p\u003e\n\u003ch3\u003eFitting\u003c\/h3\u003e\n\u003cp\u003eDisconnect the air first. Turn the old handle off by hand; if the knob sits in its tail, take the knob out and set it aside for the new one. Check that the O-ring sits on the replacement, start it square on the body and turn it until snug, with no tools. On a full rebuild the handle is the last part to go on. Finish by screwing the knob back into the tail.\u003c\/p\u003e\n\u003ch3\u003eWorth knowing\u003c\/h3\u003e\n\u003cp\u003eHand pressure is all the thread needs, and forcing it can strip it. Wipe off any paint that reaches the thread while it is still wet. We can only vouch for it on the Zephyr itself: thread and length vary from one airbrush to the next, so treat it as unsuitable for other models. This is one of the numbered parts of the Hobby Heaven Zephyr range, which keeps growing; once a number is given, it always means the same part.\u003c\/p\u003e","brand":"Hobby Heaven","offers":[{"title":"Default Title","offer_id":68436813250749,"sku":"HHA-3301","price":6.71,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/hobby-heaven-zephyr-cutaway-handle-hha-3301-2.jpg?v=1795192447","url":"https:\/\/hobbyheaven.org\/en-au\/products\/hobby-heaven-zephyr-cutaway-handle-hha-3301","provider":"Hobby Heaven","version":"1.0","type":"link"}